Headrails-Brackets

Bathroom Partition Headrails and Brackets
All headrails are in stock for fast delivery. Headrails are aluminum finish and are cut in the field for easy installation. The headrail supports the top of the pilaster to keep it perfectly vertical. The pilaster is also mounted to the floor. The headrail attaches to the wall and to each pilaster that it connects to. This helps support the partition door to swing properly.
RBA Partitions and Parts Catalog

View as Grid List

18 Items

per page
Set Descending Direction
  1. ASI Headrail Return Kit

    ASI Headrail Retrun Kit is designed to work with Global and Accurate Partitions. Manufacturered to work with the new style headrails introduced in May of 2023 which are a lower profile than the previous models that are no longer available. The headrail retun kit will work with the 3/4", 1" and 1-1/4" thickness headrails from ASI. This kit includes (2) Brackets, (2) Wall Anchoring Screws, (2) Plastic Anchors, (4) Fastening Screws and (1) Headrail End Cap. Can be used to run across the top of partitions either between two wall or runnning from a rear wall to a pilaster. Often used in conjuction with ASI Headrail (9A84) Manufacturer Part# 40-8448100.

    9A8448
    $15.00
  2. ASI Headrail

    ASI Headrail is designed for use with Global and Accurate Partitions. This headrail was introduced in May of 2023 and offers a lower profile than the previous design which is no longer available. The ASI Headrail comes in three headrail thickness options: 3/4", 1" and 1-1/4". Options for length are 65" or 98" which can be cut down to size needed. Being constructed of extruded mluminum, allows for the headrail to be durable and easily customizable. Headrails are use to help stability restroom toilet partitions and give a finished look. Installed a top of pilasters or also used to connect a back wall to a pilaster. Often used in conjuction with ASI Headrail Retrun Kit (9A8448).

    Known as Manufacturer Part# 8440651, 8440981, 8460651, 8460981, 8450651 and 8450981.

    Also known as Part# 9A846534, 9A849834, 9A84651, 9A84981, 9A8465114, and 9A8498114.

    9A84
    As low as $51.00
  3. Partition Headrail 1" x 95" Type B

    Partition Anti-Grip Headrail 1" X 95" Type B Aluminum

    Extruded anodized aluminum construction. The cross section measures 2-3/4" high by 1-3/32" by 95" long. The part that fits on top of the pilaster is 1" wide by 3/4" deep. The wall thickness on this part is 3/64". Also known as a Bathroom Stall Headrail. Manufacture part # 80042.

    This product is usually used on Solid Plastic (HDPE) Toilet Partitions.

    9HR98B1
    $85.00
  4. Headrail Bracket for 1 1/4" Headrail

    Partition Headrail Bracket for 1 1/4" Headrail

    Chrome plate Zamac die cast construction. The overall measurements of the bracket are 3-3/32" wide by 1-19/32" high by 1" deep with a hole spacing of 2-3/8". The spread for the headrail is 1-7/16" wide by 1-19/32" deep. Also known as a Bathroom Stall Headrail Bracket. Manufacture part # 2170.

    Shipped with screws.

    9A0213
    $3.23
  5. Headrail Bracket for 1" Headrail

    Partition Headrail Bracket for 1" Headrail

    Chrome plate Zamac die cast construction. The overall measurements of the bracket are 2-3/4" wide by 1-19/32" high by 1" deep with a hole spacing of 2". The spread for the headrail is 1-1/8" by 1-19/32" deep. Also known as a Bathroom Stall Headrail Bracket. Manufacture part # 2150.

    Shipped with screws.

    9A0215
    $3.23
  6. Headrail End Plug 1" X 1-1/2"H

    Partition Headrail End Plug 1" X 1-1/2" HIGH

    Chrome plated Zamac die cast construction. The head rail end plug measures 1" wide by 1-1/2" tall. The pegs that hold it in place project out 3/4". Also known as a Bathroom Stall Head Rail End Plug. Manufacture part # 6660.

    9A0666
    $2.57
  7. Headrail End Plug 1"X2"H

    Headrail End Plug 1"X2"H

    Chrome plated Zamac die cast construction. The head rail end plug measures 1" wide by 2" tall. Also known as a Bathroom Stall Head Rail End Plug. Manufacture part # 6670.

    9A0667
    $3.80
  8. Partition Headrail 1" x 65" Type B

    Partition Anti-Grip Headrail 1" X 65" Type B Aluminum

    Extruded anodized aluminum construction. The cross section measures 2-3/4" high by 1-3/32" by 65" long. The part that fits on top of the pilaster is 1" wide by 3/4" deep. The wall thickness on this part is 3/64". Also known as a Bathroom Stall Headrail. Manufacture part # 80042.

    This product is usually used on Solid Plastic (HDPE) Toilet Partitions.

     

    Also know as Part# 9THP75

    9HR75B1
    $50.60
  9. Partition Headrail 1-1/4"X65" Type B

    Partition Anti-Grip Headrail 1-1/4" X 62" Type B Aluminum

    Extruded anodized aluminum construction. The cross section measures 2-3/4" high by 1-11/32" by 65" long. The part that fits on top of the pilaster is 1-1/4" wide by 3/4" deep. The wall thickness on this part is 3/64". Also known as a Bathroom Stall Headrail. Manufacture part # 80052.

     

    Also know as Part# 9THS621-1/4, 9THSSXX, and 9THLXX.

    9HR62B2
    $50.60
  10. Partition Headrail 1-1/4"X 95" Type B

    Partition Anti-Grip Headrail 1-1/4" X 95" Type B Aluminum. Extruded anodized aluminum construction. The cross section measures 2-3/4" high by 1-11/32" by 95" long. The part that fits on top of the pilaster is 1-1/4" wide by 3/4" deep. The wall thickness on this part is 3/64". Also known as a Bathroom Stall Headrail. Manufacture part # 80052.

    9HR98B2
    $74.75
  11. Aluminum Headrail 1"X60" Type A

    Hadrian Aluminum Headrails for 1"X60" Type A used on overhead braced floor mounted partitions. The headrail goes between a U shape which is 1" for the headrail to fit into at the top of the pilaster, the headrail bolts to the pilaster for stability at the top. Also known as part number 580060.

    9HR60A
    $44.28
  12. Aluminum Headrail 1"X74" Type A

    Hadrian Aluminum Headrails for 1"X74" Type A used on overhead braced floor mounted partitions. The headrail goes between a U shape which is 1" for the headrail to fit into at the top of the pilaster, the headrail bolts to the pilaster for stability at the top. Also known as part number 580074.

    9HR74A
    $56.93
  13. Aluminum Headrail 1"X96" Type A

    Hadrian Aluminum Headrails for 1"X96" Type A used on overhead braced floor mounted partitions. The headrail goes between a U shape which is 1" for the headrail to fit into at the top of the pilaster, the headrail bolts to the pilaster for stability at the top. Also known as part number 580096.

    9HR96A
    $69.58
  14. Hadrian Headrail End Cap for Metal

    Hadrian Headrail End Plug for Metal and Stainless Steel Partitions. This is used to close off the end of the partition headrail at the top of your partitions. This goes over the 1"x1-5/8"ht outside edge of headrail opening. Known as part number 607220 and used only with Hadrian Partition Company.

    9HH075
    $4.25
  15. Hadrian Headrail for 1" solid plastic

    Hadrian Partitions Aluminum Headrail for 1" thick material Type A used on overhead braced floor mounted solid plastic partitions. The headrail goes over the top of the pilaster  which is 1" for the headrail to fit over the top of the pilaster. The slot is for 1/4" curtain hook. The headrail bolts to the pilaster for stability at the top. Overall dimension is 1-1/4"x1-3/4"ht. Also known as part number 620060, 620074. 

     

    Also known as Part# 9HR60SP, 9HR74SP and 9HR96SP.

    9HRXXSP
    $55.00
  16. Hadrian Partition Headrail End Cap

    Hadrian Headrail End Cap for Overhead braced partitions. This headrail end cap is used with solid plastic partitions. This will plug up the end of the headrail if it is exposed. Also known as 627220.

    9HH085
    $3.10
  17. Aluminum Headrail Solid Phenolic for 3/4" Thickness

    Solid phenolic aluminum headrail available in the following lengths are 65" and 95". Used with 3/4" thick pilaster, Anti-grip type.
    9THPH
    $50.60
  18. Powder Coated Metal Headrail 1-1/4" x 65"

    Overhead braced aluminum headrails help support the top of the pilaster and are for powder coated steel partitions. The headrail attaches to the pilaster to help support it and are available in the following lengths - 65" x 1-1/4" thick pilasters. For an 1-1/4" Wide Pilaster, Anti-grip type. 
    9THS621-1/4
    $50.60
View as Grid List

18 Items

per page
Set Descending Direction