Partition Parts| General Toilet Partition

Robert Brooke & Associates is a leading commercial bathroom stall hardware parts provider with over 35 years of experience in the stalls and toilet partition hardware industry. We have worked with various organizations throughout the years to provide them with everything they need for their commercial restrooms including bathroom partition hardware. We have had the pleasure of distributing bathroom stall hardware for schools, churches, athletic centers and other facilities with heavy restroom traffic.

We sell a variety of bathroom stall hardware including but not limited to brackets, coat hooks, door pulls, hinges, latches, keepers and stoppers. For high-quality, affordable commercial bathroom stall hardware, look no further than Robert Brooke & Associates.

Restroom Stall Parts Manufacturers

If you like to purchase bathroom stall hardware and equipment from reputable brands, you’ll be pleased to know that we carry hardware from some of the most trusted restroom stall hardware manufacturers in the industry. You can be confident when placing your order with us knowing that we only sell restroom stall parts from highly respected brands. 

The manufacturers that we distribute parts from produce strong and durable bathroom stall hardware that lasts for a long time. These are United States and Canadian companies whose main focus is manufacturing quality-made restroom stall hardware for consumers. A few of these restroom stall hardware brands also have an extended inventory that includes washroom accessories.

As suppliers of the Grade A products that these brands create, we are used to seeing satisfied customers who order bathroom stall hardware from our online store. Let us know if you come up with any questions about one of the restroom stall parts brands and we will assist you promptly. 

Our Bathroom Stall Parts Supply

We have many parts to choose from in our supply of bathroom partition hardware. Be sure to choose the correct bathroom stall hardware before you place your order. 

A specific brand of bathroom stall door hardware might only be of good use on that specific brand of stall, so check the name tag on your toilet stalls before shopping for your parts. For example, you will only be able to use an Accurate Bolt Latch Slide Pin on metal stalls that were manufactured by the Accurate brand. 

We also sell other bathroom stall door hardware that will only work on stalls made out of a specific material. The Flush Metal Top Hinge Pin ⅜ inch X 3-¼ inch is one example of restroom stall hardware that was made to be used on laminate stalls. You will find that some of the other bathroom partition hardware we carry should only be used on laminate stalls.

There are some bathroom stall parts that we sell that will work with more than one brand of partitions. For example, the Cast Stainless Steel Slide Bolt Latch that is 1-½ inch W X 3-¼ inch L, 2-¾ inch between screws is a piece of stainless steel bathroom stall hardware that can be used on both Accurate and Global stalls.

We have pages and pages of bathroom stall hardware to look through. If you already know exactly what restroom stall hardware you need, then you might want to make it easier by narrowing your search in our Search Bar. To get more information on our supply of bathroom stall parts, please visit our RBA Partitions and Parts Catalog.

Questions About Bathroom Stall Hardware

Please direct your bathroom stall hardware related inquiries to our main office by phone call or email. The team at Robert Brooke & Associates is ready to answer your questions about the bathroom stall door hardware that we carry. 

Please contact us during business hours so that we can help you out if you get stuck on something while shopping our bathroom stall door hardware selection. Call our phone at 1 (800) 642-2403 or send an email to one of our professionals at Sales@RobertBrooke.com.

Filter
View as Grid List

24 Items

per page
Set Descending Direction
  1. Cast Stainless Steel Bottom Hinge for 1-1/4" Sq Edge

    Cast Stainless Steel Bottom Hinge for 1-1/4" Sq Edge

    Cast stainless steel construction. The hinge measures 2-1/4" high by 1-1/4" wide and the hole spacing is 1-1/2". The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 5/16" diameter bushing. Also known as a General Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3293.

    Shipped with mounting screws.

    a=1-5/8"

    This is a replacement for the Zamac Die Cast hinges for General, American Sanitary, Flush Metal and Fiat Partitions.

    9A3293
    $23.00
  2. Cast Stainless Steel Top Hinge for 1-1/4" Sq Edge

    Cast Stainless Steel Top Hinge for 1-1/4" Sq Edge

    Cast Stainless Steel construction. The hinge measures 2-1/4" high by 1-1/4" wide. The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 3/8" diameter bushing. Also known as a Bathroom Stall Pivot Hinge Top 1-1/4". Manufacture part # 3793

    a=1-11/16"

    also known as general, american sanitary, flush, fiat

    9A3793
    $23.00
  3. General Ada Latch Cover Knob w/ Offset Pin

    General Ada Concealed Latch Cover Knob w/ Offset Pin

    Zamac die cast construction with polished chrome plating. Outside diameter of the knob and cover are 1-3/4" with the inner ring diameter of 1-7/32". The ADA Barrier Free Lever is 3-3/4" long. The off set pin has a diameter of 11/32" and 2-11/16". Also known as a Bathroom Stall Concealed Latch Cover and Knob Assembly. Manufacture part # 8190. Typically used with powder coated steel toilet partitions.

    9A8190
    $15.18
  4. General Ada Latch Knob & Cover, Straight Pin Only

    General Ada concealed latch cover & knob with straight pin Used with plastic laminate material.

    Zamac die cast construction with polished chrome plating. Outside diameter of the knob and cover are 1-3/4" with the inner ring diameter of 1-7/32". The ADA Barrier Free Lever is 3-3/4" long. The straight pin has a diameter of 11/32" and 2-11/16". Also known as a Bathroom Stall Concealed Latch Cover and Knob Assembly. Manufacture part # 8080

    92500C
    $16.32
  5. General Latch Knob, Cover And Pin

    General Partitions Concealed Latch Knob, Cover And Pin Chrome Plated. Zamac die cast construction with polished chrome plating. Outside diameter of the knob and cover are 1-3/4" with the inner ring diameter of 1-7/32". The pegs project out 1-7/32" on the cover. Pin has a diameter of 11/32" and comes in Straight or Offset and is 2-11/32" long. Also known as a Bathroom Stall Concealed Latch Cover and Knob Assembly. Manufacture part # 5190 Offset Pin and 5080 Straight Pin. Only 1 pin is sent. Also used with Global and Fiat partitions.

    92500B
    $9.11
  6. General Latch Knob & Cover

    General Partition Concealed Latch Knob & Cover

    Zamac die cast construction with polished chrome plating. Outside diameter of the knob and cover are 1-5/8" with the inner ring diameter of 1-1/4". Also known as a Bathroom Stall Concealed Latch Cover and Knob Assembly. Manufacture part # 1390, 6140.

    92000C
    $8.22
  7. General Top Hinge For 1-1/4" Round Edge Post

    General Top Hinge For 1-1/4" Round Edge Post

    Chrome plated Zamac die cast construction. Pivot hinge is 2-3/16" tall by 1-1/4" wide. The slot that wraps around the post is 1-1/4" wide and 11-16" deep. The hole spacing is 1-1/2" on center. The lug projects out 1-1/2" and is 1/2" thick. The bushing on the lug is 3/8" diameter. Also known as a Bathroom Stall Pivot Hinge Top 1-1/4". Manufacture part # 3510.

    Shipped with mounting screws.

    A=1-7/6"

    91500B
    $10.12
  8. General Top Hinge Pin 3/8"Dia x 3-3/4" L

    General Top Hinge Pin 3/8"Dia x 3-3/4" L

    Zinc plated steel construction. The hinge pin is 3/8" diameter by 3-3/4" long. Also known as a Bathroom Stall Door Hinge Pin. Manufacture part # 98544.

    91504B
    $3.80
  9. General Top Hinge Pin 3/8 Diameter 3-1/4 Long For Laminate

    General Top Hinge Pin For Laminate Partitions

    Threaded steel construction. The top pin measures 3/8" diameter by 3-1/4" long with 5/16-18 threads. It has a screw driver flat slot on one end. Also known as a Bathroom Stall Door Top Hinge Pin. Manufacture part # 98584.

    91503B
    $3.48
  10. General Bottom Hinge 1-1/4" Round Edge

    General Partitions Bottom Hinge 1-1/4" Round Edge Post

    Chrome plated Zamac die cast construction. Pivot hinge is 2-3/16" tall by 1-1/4" wide. The slot that wraps around the post is 1-1/4" wide and 11-16" deep. The hole spacing is 1-1/2" on center. The lug projects out 1-1/2" and is 1/2" thick. The bushing on the lug is 5/16" diameter. Also known as a Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3010.

    Shipped with mounting screws.

    A=1-7/6"

    91000B
    $10.12
  11. General Bottom Cam Housing Unplated

    General Partitions Bottom Cam Housing Unplated

    Unplated Zamac die cast construction. The housings outside dimensions are 3-1/8" wide by 1-5/32" deep by 1-7/16" high. The screw hole is 7/32" diameter. The square slot is 1" by 15/16". The square bulge were the screw is located is 1-1/2" by 1-5/32". Also known as a Bathroom Stall Door Insert - Bottom 1". Manufacture part # 4066

    91005B
    $15.18
  12. General Nylon Cam For Steel

    General Partitions Nylon Cam For Steel

    White nylon plastic construction. Square part of nylon cam is 7/8" by 1-1/8" with a diameter of 11/16". The cam has an overall heigth of 1-1/4", with a cylinder diameter of 7/8". Also known as a Bathroom Stall Cam. Manufacture part # 98185

    91002B
    $2.15
  13. General Pintle 5/8" Dia For Steel

    General Partitions Pintle 5/8" Diameter For Steel Doors

    Steel and white nylon construction. The Pintle is 5/8" diameter by 2-1/4" overall length with 5/16-18 threaded end. Also known as a Bathroom Stall Bottom Pintle 5/8" Medium Lift. Manufacture part # 98175.

    Shipped with nut and lock washer.

    91006B
    $4.43
  14. General Keeper Bumper For Concealed 1-1/4"

    General Keeper Bumper For Concealed 1-1/4" Round Edge

    Polished chrome plate Zamac die casting construction. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5510.

    Shipped with mounting screws.

    92060B
    $7.40
  15. General Keeper Bumper Concealed

    General Toilet Partition Keeper Bumper For Square Edge 1-1/4" Thick Posts

    Zamac die cast construction and polished chrome plated. The keeper and strike is 2-1/2" tall by 1-7/8" wide. The stop is 17/32" thick and projects out 3/4". The mounting holes are 1-1/2" on center. The locking slot is 7/16" deep. Generally used with concealed latches. Also known as a Bathroom Stall Strike and Keeper - Inswing/Outswing 1-1/4". Manufacture part # 5230.

    Shipped with mounting screws.

    92560E
    $9.30
  16. General Slide Bolt Latch

    General Partitions Slide Bolt Latch Chrome Plated

    Zamac die cast construction, polished chrome finish. Latch base is 4" high with 2-3/4" hole spacing. Latch bolt is 3-3/16" long by 3/4" wide by 3/16" thick. The latch bolt clearance is 9/16" from the back of the base to the under side of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch. Manufacture part # 5020.

    Shipped with mounting screws.

    92000P
    $8.60
  17. General Keeper Bumper For 1-1/4" Inswing Sq Edge

    General Toilet Partitions Keeper Bumper For 1-1/4" Inswing Sq Edge Pilaster Or Post

    Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for inswinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5110

    Shipped with mounting screws.

    920601
    $8.50
  18. General Keeper Bumper For 1-1/4" Outswing Sq Edge

    General Toilet Partitions Keeper Bumper For 1-1/4" Outswing Square Edge Pilaster Or Post

    Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for outswinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5210

    Shipped with mounting screws.

    92060E
    $8.50
  19. General Top Hinge For 1-1/4" Sq Edge

    General Toilet Partitions Top Hinge For 1-1/4" Square Edge Pilaster Or Post

    Chrome plated Zamac die cast construction. The hinge measures 2-1/4" high by 1-1/4" wide. The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 3/8" diameter bushing. Also known as a General Bathroom Stall Pivot Hinge Top 1-1/4". Manufacture part # 3790

    A=1-5/8"

    91500P
    $9.61
  20. General Bottom Hinge For 1-1/4" Sq Edge

    General Toilet Partition Bottom Hinge For 1-1/4" Sq Edge Pilaster Or Post Chrome Plated

    Chrome plated Zamac die cast construction. The hinge measures 2-1/4" high by 1-1/4" wide and the hole spacing is 1-1/2". The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 5/16" diameter bushing. Also known as a General Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3290

    Shipped with mounting screws.

    a=1-5/8"

    91000P
    $9.61
  21. General Top Hinge

    General Partitions Top Hinge

    Chrome plated Zamac die cast construction. The wrap around dimension is 1-1/4" wide by 1-3/4" high and 11-16" deep. The hole spacing is 1-1/8" on center. The lug projects out 1-3/8" and is 1/2" thick with a 1/4" bushing diameter. Also known as a Bathroom Stall Pivot Hinge - Top 1-1/4". Manufacture part # 3910.

    a=1-11/16"

    96320A
    $17.71
  22. General Bottom Hinge

    General Partitions Bottom Hinge For 1-1/4" Round Edge

    Chrome plated Zamac die cast construction. The wrap around dimension is 1-1/4" wide by 1-3/4" high and 11-16" deep. The hole spacing is 1-1/8" on center. The lug projects out 1-3/8" and is 1/2" thick with a 1/4" bushing diameter. Also known as a Bathroom Stall Pivot Hinge - Bottom 1-1/4". Manufacture part # 3420.

    a=1-11/16"

    96319A
    $17.71
  23. Global Complete Hinge Set with Rounded Edge

    Global Complete Hinge Set with Rounded Edge. Used currently with these factories Global, General and Flush Metal and Accurate Partitions. Complete as shown in picture with the parts. Includes top pin, top hinge, bottom cam, pintle and bottom hinge and security screws. Used with powder coated steel and stainless steel partitions with a slight round edge. These will not work with old original Accurate Partitions prior to 2013. Used 2013 to current with Accurate Partitions.

    9G663140
    $29.00
View as Grid List

24 Items

per page
Set Descending Direction