Stainless Steel

Cast Stainless Steel Bathroom Partition Keepers and Stops

All keeper bumpers and stops are in stock for fast delivery. Replacing old hardware with new will change your bathroom's to looking new again. All Partition keeper bumpers will come with security screws. All throw latch keepers are required for all handicap doors over 32", 34", 36" width for easy access to the inside door.
RBA Partitions and Parts Catalog

View as Grid List

Items 1-36 of 42

per page
Set Descending Direction
Page
  1. Hadrian Keeper Bumper 1-1/4" Round Edge Cast SS

    cast stainless steel, 601800-700. for 1-1/4" round edge pilaster & concealed latches, 9/16" x 11/16" slot.
    9HH810
    $17.08
  2. Bobrick Inswing Keeper

    Bobrick inswing keeper for door latch. Also known as 1040-35. Used with slide latch for assembly

    1040-35
    $17.71
  3. Bobrick Outswing Keeper

    Bobrick outswing keeper for door latch. Also known as 1040-36. Used with slide latch for assembly

    1040-36
    $35.42
  4. Bobrick Flat Mount Keeper

    Bobrick flat mount keeper for door latch. Also known as 1040-39. Used with slide latch for assembly

    1040-39
    $24.04
  5. Cast SS Inswing Surface Keeper 1-1/2" Screws

    Partition Inswing Surface Keeper 1-1/2" Between Screws Cast Stainless Steel

    Cast stainless steel construction. The keeper base is 2-1/2" tall by 1-3/32" wide. The latch face measures 2-1/2" tall with a 7/8" projection. The hole spacing is 1-1/2". The slot measures 5/16" by 1-9/16". Also known as a Bathroom Stall Keeper-Inswing Flat. Manufacture part # 5163.

    Shipped with mounting screws.

    9A5163
    $13.80
  6. Cast SS Keeper Bumper For 1" Sq Post Outswing

    Partition Keeper Bumper For 1" Square Post Outswing Cast Stainless Steel

    Cast stainless steel construction. Strike and Keeper measures 2-1/2" high by 1-15/16" wide. Stop is 17/32" thick and projects out 13/16". The screw holes are 1-1/2" on center. This Bathroom Toilet Door Keeper is designed for use on 1" thick square edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Outswing 1". Manufacture part # 5723.

    Shipped with mounting screws.

    9A5723
    $18.04
  7. Cast SS Keeper Bumper For 1-1/4" Sq Post Outswing

    Partition Keeper Bumper For 1-1/4" Square Post Outswing Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for outswinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5213.

    Shipped with mounting screws.

    9A5213
    $17.10
  8. Cast SS Keeper Bumper Inswing 1" Post Sq Edge

    Partition Keeper Bumper Inswing 1" Post Square Edge Cast Stainless Steel

    Cast stainless steel construction. Strike and Keeper measures 2-1/2" high by 1-15/16" wide. Stop is 17/32" thick and projects out 13/16". The screw holes are 1-1/2" on center. The slot is 5/16" deep by 1-1/2" high. This Bathroom Toilet Door Keeper is designed for use on 1" thick square edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing 1". Manufacture part # 5623.

    Shipped with mounting screws.

    9A5623
    $20.62
  9. Cast SS Keeper Bumper Inswing 1" Sq Edge

    Partition Keeper Bumper Inswing 1" Square Edge Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-15/16" wide. The mounting holes are 1-1/2" on center. The stop is 2-1/2" tall by 13/16" projection with a rubber insert. The two slots are 5/16" deep by 13/16" high. Also known as Bathroom Stall Strike and Keeper Inswing 1". Manufacture part # 5823.

    Shipped with mounting screws.

    9A5823
    $17.71
  10. Cast SS Keeper Bumper Inswing 1-1/2" Screws

    Partition Keeper Bumper Inswing 1-1/2" Between Screws Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper measure 2-1/2" tall by 2-9/16" deep and is 1/8" thick. The stop projects out 3/4" and has a rubber insert. The mounting holes are 1-19/32" on center. Also known as a Bathroom Stall Strike and Keeper - Inswing Flat. Flat backed for wall mounting. Manufacture part # 5143.

    Shipped with mounting screws.

    9A5143
    $16.45
  11. Cast SS Keeper Bumper Inswing 1-1/4" Post Sq Edge

    Partition Keeper Bumper Inswing 1-1/4" Post Square Edge Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for inswinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5113.

    Shipped with mounting screws.

    9A5113
    $18.98
  12. Cast SS Keeper Bumper Inswing 1-1/4" Sq Edge

    Partition Keeper Inswing 1-1/4" Square Edge Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper measure 2-1/2" high by 1-7/8" wide with a hole spacing of 1-1/2" on center. The stop is 2-1/2" tall by 3/4" wide with a rubber insert. The slot measures 13/16" high by 1/4" deep. Commonly known as a Bathroom Stall Strike and Keeper Inswing 1-1/4". Manufacture part # 5343.

    Shipped with mounting screws.

    9A5343
    $17.71
  13. Cast SS Keeper Bumper Inswing 3/4" Sq Edge

    Partition Keeper Bumper Inswing 3/4" Square Edge Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-15/16" wide. The mounting holes are 1-1/2" on center. The stop is 2-1/2" tall by 13/16" projection with a rubber insert. The two slots are 5/16" deep by 13/16" high. Also known as Bathroom Stall Strike and Keeper Inswing 3/4". Manufacture part # 4903.

    Shipped with mounting screws.

    9A4903
    $16.45
  14. Cast SS Keeper Bumper Outswing 1-1/2" Screws

    Partition Keeper Bumper Outswing 1-1/2" Between Screws Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper measure 2-1/2" high by 1-5/8" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. Also known as a Bathroom Stall Strike and Keeper Outswing Flat. Manufacture part # 5263.

    Shipped with mounting screws.

    9A5263
    $15.18
  15. Cast SS Keeper Flat Stop 1-1/2" Screws

    Partition Keeper Flat Stop 1-1/2" Between Screws Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper measure 2-1/2" tall by 2-9/16" deep and is 1/8" thick. The stop projects out 3/4" and has a rubber insert. The mounting holes are 1-1/2" on center. Slots are 1/4" deep by 13/16" high. Also known as a Bathroom Stall Strike and Keeper - Inswing Flat. Flat backed for wall mounting. Manufacture part # 5283.

    Shipped with mounting screws.

    9A5283
    $16.45
  16. Cast Stainless Steel Door Stop

    Cast Stainless Steel Partition Door Stop

    Cast stainless steel construction. The strike and keeper measure 2-1/2" high by 1-7/8" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing Flat. Manufacture part # 5173.

    Shipped with mounting screws.

    9A5173
    $11.89
  17. Cast Stainless Steel Inswing Keeper

    Cast Stainless Steel Partition Keeper 1-1/2" Between Screws

    Cast stainless steel construction. Keeper base is 2-1/2" high by 1-3/16" wide with a 1-1/2" hole spacing. Strike is 2-1/2" tall by 7/8" deep. The material 1/8" thick. The slot is 13/16" high by 1/4". Also known as a Bathroom Stall Keeper Inswing Flat. Manufacture part # 5183.

    Shipped with mounting screws.

    9A5183
    $15.18
  18. Concealed Latch Cast SS Keeper Bumper 1"

    Concealed Partition Latch Keeper Bumper 1" Square Edge Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper measures 2-1/2" tall by 1-15/16" wide by 1-17/32 deep. The mounting holes are 1-1/2" on center. The stop measures 7/8" wide by 17/32" deep with a rubber insert bumper. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing 1". Manufacture part # 5733.

    Shipped with mounting screws.

    9A5733
    $27.83
  19. Concealed Latch Cast SS Keeper Bumper 1-1/4 inch Post Round Edge

    Concealed Partition Latch Keeper Bumper 1-1/4" Post Round Edge Cast Stainless Steel

    Cast stainless steel construction. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5513.

    Shipped with mounting screws.

    7/16" X 3/4" SLOT

    9A5513
    $15.81
  20. Concealed Latch Cast SS Keeper Bumper 1-1/4" Sq Edge

    Concealed Partition Latch Keeper Bumper 1-1/4" Square Edge Cast Stainless Steel

    Cast stainless steel construction. The keeper and strike is 2-1/2" tall by 1-7/8" wide. The stop is 17/32" thick and projects out 3/4". The mounting holes are 1-1/2" on center. The locking slot is 7/16" deep. Generally used with concealed latches. Also known as a Bathroom Stall Strike and Keeper - Inswing/Outswing 1-1/4". Manufacture part # 5233.

    Shipped with mounting screws.

    9A5233
    $29.10
  21. Concealed Latch Cast SS Keeper Bumper For 1-1/2" screws

    Concealed Partition Latch Keeper Bumper For 1-1/2" Between Screws Cast Stainless Steel

    Cast stainless steel construction. The strike and keeper measure 2-1/2" high by 1-13/16" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. The slot is for the concealed latch is 7/8" high by 7/16" deep. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing Flat. Manufacture part # 5243

    Shipped with mounting screws.

    9A5243
    $15.18
  22. Concealed Latch Cast SS Keeper Bumper Inswing

    Concealed Partition Latch Keeper Bumper Inswing Cast Stainless Steel

    Stainless steel casting. The strike and keeper is 1-1/4" high by 2-1/2" deep by 1/8" thick. The stop is 1/2" deep by 1-1/4 wide with a rubber insert. The slots are 1/4" deep. Also known as a Bathroom Stall Strike and Keeper Inswing Flat. Manufacture part # 5653.

    Shipped with mounting screws.

    9A5653
    $41.75
  23. Concealed Latch Cast SS Keeper Bumper Inswing 1-1/4"

    Concealed Partition Latch Keeper Bumper Inswing 1-1/4" Round Edge Cast Stainless Steel

    Cast stainless steel construction. Keeper is 1-1/4" tall by 2-3/8" wide by 2-9/16" deep. The strike is a17/32" thick and the slot is 1/4" deep. The opening to mount it on the round edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing 1-1/4". Manufacture part # 5583.

    Shipped with screws for mounting.

    9A5583
    $16.45
  24. Concealed Latch Cast SS Keeper Bumper Inswing 1-1/4"

    Concealed Latch Keeper Bumper Inswing For 1-1/4" Square Edge Post Cast Stainless Steel

    Cast stainless steel construction. Keeper is 1-1/4" tall by 2-3/8" wide by 2-9/16" deep. The strike is a17/32" thick and the slot is 7/16" deep. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing 1-1/4". Manufacture part # 5983

    Shipped with screws for mounting.

    9A5983
    $16.45
  25. Concealed Latch Cast SS Keeper Bumper Outswing

    Concealed Latch Keeper Bumper Outswing Cast Stainless Steel

    Cast Stainless Steel casting. The strike and keeper is 1-1/4" high by 1-3/4" deep by 1/8" thick. The stop is 1/2" deep by 1-1/4 wide with a rubber insert. Also known as a Bathroom Stall Strike and Keeper Outswing Flat. Manufacture part # 5643.

    Shipped with mounting screws.

    9A5643
    $27.83
  26. Concealed Latch Cast SS Keeper Bumper Outswing 1-1/4" Round Edge

    Concealed Partition Latch Keeper Bumper Outswing 1-1/4" Round Edge Cast Stainless Steel

    Cast stainless Steel Construction. The outside dimensions are 2-3/8" wide by 1-1/4" high by 1-3/4" deep. Stop projects out 1-1/8" by 1/2" thick with a rubber insert. Designed for an 1-1/4" thick post round edge. Also known as a Bathroom Stall Strike and Keeper Outswing 1-1/4". Manufacture part # 5573.

    Shipped with mounting screws.

    9A5573
    $13.92
  27. Concealed Latch Cast SS Keeper Bumper Outswing 1-1/4"

    Concealed Partition Latch Keeper Bumper Outswing 1-1/4" Square Edge Cast Stainless Steel

    Cast stainless steel construction. Keeper is 1-1/4" tall by 2-3/8" wide by 1-13/16" deep. The strike is 1/2" thick with rubber insert. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5973.

    Shipped with screws for mounting.

    9A5973
    $16.45
  28. Concealed Latch Cast SS Keeper Bumper 1-1/4" Sq Edge

    Concealed Partition Latch Keeper Bumper 1-1/4" Square Edge Cast Stainless Steel

    Cast stainless steel construction. Keeper is 1-1/4" tall by 2-3/8" wide by 1-3/4" deep. The strike is a 1/2" thick and the slot is 7/16" deep. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5963.

    Shipped with screws for mounting.

    9A5963
    $29.10
  29. Knickerbocker SS Keeper Bumper Concealed for Laminate

    Knickerbocker Stainless Steel Keeper Bumper Concealed, also known as 152-CSM for plastic laminate. For 1-1/4" Square Edge Post.
    9K1152SS
    $56.93
View as Grid List

Items 1-36 of 42

per page
Set Descending Direction
Page