Exit Devices

Exit Devices

Selling exit devices and repair parts for Adams Rite, Doromatic, American Device,
Cal Royal, Corbin Russwin, Global Door Controls, Jackson Exit Device, Monarch,
Sargent, Von Duprin, and Yale.

Make sure you click on the Exit Device Image or Text for more
dimensional and pricing information.

View as Grid List

Items 1-36 of 612

per page
Set Descending Direction
Page
  1. Von Duprin 22 Exit Device Only

    Von Duprin 22 Exit Device Only

    Von Duprin 22 rim exit device for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3, 2001, Grade 1. Covers stock hollow metal doors with 161* cutouts. Fits door stiles as narrow as 3 13/16"

    Ships with all mounting screws and the 299 strike.

    22EO
    As low as $355.46
  2. Adams Rite 3700/8700/8800 End Cap New Style

    Adams Rite New Style Metal End Cap for the 3700, 8700 and 8800.
    The black cap measures 2-3/8" high x 1-1/2" wide x 1-1/4" projection.  Newer metal end cap will replace the old plastic ones.

    Adams Rite Part # 41-0902-03-IP

    G41090203
    $28.91
  3. Von Duprin 2227 Exit Device Only

    Von Duprin 2227 Exit Device Only

    Von Duprin 2227 surface mounted vertical rod exit device for all types of single and double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3, 2001, Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. Fits door stiles as narrow as 3-5/8". For doors as high as 7'1", if your door is higher than 7'1", please call.

    Ships with all mounting screws and the 299, 304L and 248L-4 Strike

    Von Duprin Part # 2227EO

    2227EO-
    As low as $604.54
  4. Von Durpin 98 Exit Device

    Von Duprin 98 rim exit devices for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The Von Duprin 98 device has a smooth mechanism case and the Von Duprin 99 device has a grooved case. The rim device is non-handed.

    Ships with all the mounting screws and the 299 Strike.

    98EO
    As low as $1,031.10
  5. Von Duprin 99 Exit Device Only

    The Von Duprin 99 rim exit devices for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The Von Duprin 98 device has a smooth mechanism case and the Von Duprin 99 device has a grooved case. The rim device is non-handed.

    Ships with all the mounting screws and the 299 Strike.

    99EO
    As low as $1,031.10
  6. Von Duprin 98/99 Maintenance Kit

    The Von Duprin 98/99 Maintenance Kit includes all the parts and pieces you need to keep your 98 or 99 device running properly for years.  If you are interested we can email a list of the parts.

    Von Duprin part # 050046

    98/99 Maintenance Kit Instruction Manual

    G050046
    $918.39
  7. Von Duprin 9927 Exit Device

    Von Duprin 9827/9927 surface mounted vertical rod device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. The Von Duprin 9827 device has a smooth mechanism case and the Von Duprin 9927 device has a grooved case. The surface vertical rod device is non-handed.

    9927EO-
    As low as $1,538.72
  8. Von Duprin 9975 Exit Only

    Von Duprin 9875/9975 mortise lock device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Fits stock hollow metal doors with 86 cutout and door stiles as narrow as 4-3/4" (121mm). The Von Duprin 9875 device has a smooth mechanism case and the Von Duprin 9975 device has a grooved case. The mortise lock device is non-handed

    9975EO
    As low as $1,224.46
  9. Von Duprin 990DT Trim

    The Von Duprin 990DT Trim is the standard Dummy Trim for the 99 and 98 Series devices.  The plate is constructed of Bronze or Stainless Steel and then plated to the desired finish.  The plate measures 3" wide by 14-3/16" tall, and includes the mounting screws.  The stanchions coming off the back of the plate line up with the center case mounting screws.

    Von Duprin Part # 990DT-R&V

    99DT-
    As low as $155.41
  10. Von Duprin Exit Device 99 Knob Trim

    Von Duprin 990K Knob Trim

    Plate measures 3" wide by 14-3/16" long.

    Von Duprin Part # 990K-R&V

    99K-
    As low as $267.26
  11. Von Duprin Exit Device 99 Lever Trim

    The Von Duprin 996L Lever Trim replaces the 992L, and 994L and is the latest generation of the 99 Lever Trim.

    The escutcheon plate measures 2-3/4" wide by 10-3/4" high and projects out 27/32". The handle projection is 2-7/8". This lever handle is handed, but is field reversible. Key lock and unlocks lever.

    ver.

    99L
    As low as $360.34
  12. Von Duprin Exit Device 990NL Trim

    The Von Duprin 990NL Trim is the standard NIght Latch Trim for the 99 and 98 Series devices.  The plate is constructed of Bronze or Stainless Steel and then plated to the desired finish.  The plate measures 3" wide by 14-3/16" tall, and includes the mounting screws.  The stanchions coming off the back of the plate line up with the center case mounting screws.  The Rim Cylinder shown in the picture is not included.

    Von Duprin Part # 990NL-R&V

    99NL
    As low as $167.36
  13. Von Duprin Exit Device 990TP Trim

    The Von Duprin 990TP Trim is the standard Thumb Piece Trim for the 99 and 98 Series devices.  The plate is constructed of Bronze or Stainless Steel and then plated to the desired finish.  The plate measures 3" wide by 14-3/16" tall, and includes the mounting screws.  The stanchions coming off the back of the plate line up with the center case mounting screws.  The key cylinder locks and unlocks the thumb piece.  The Rim Cylinder shown in the picture is not included.

    Von Duprin Part # 990TP-R&V

    Cylinder not included.

    99TP
    As low as $222.85
  14. Von Duprin EL99 Exit Device Only

    This is the same trusted Von Duprin 99 with Electric Latch Retraction, also known as EL.

    The EL feature allows for the remote unlatching of exit devices. A control station operator can flip a switch to retract the latch bolt and immediately change an exit door to push-pull operation. A powerful, continuous duty solenoid retracts the latch bolt, either for momentary unlatching, or for extended periods of time. The EL feature is an alternative to manual dogging.

    The rim device is non-handed.
    A power supply is required for operation, see related products.
    Ships with all the mounting screws and the 299 Strike.

    EL99EO-
    As low as $1,413.31
  15. Von Duprin 2670 Guard-X Exit Device

    Heavy Duty Design
    The new Series 2670 Exit Alarm Lock provides secure protection through a large stainless steel deadbolt, which is 2" x 1/2" (51mm x 13mm) and has over a 3/4" (19mm) throw. The engagement area into the strike is over 1 1/4" (32mm) square inches. The cast aluminum latch case protects the internal mechanism and resists tampering or vandalism from inside the door. This unit has been tested to withstand up to 1600 pounds of static load force against the door.

    Fits 36" to 48" doors.
    Uses 9 volt battery
    Ships with all mounting hardware and strike.

    2670EO-
    As low as $478.17
  16. Von Duprin 88 Exit Device

    Von Duprin 88 Exit Device

    Von Duprin 88 rim devices for all types of single and double doors with mullion, UL listed for accident hazard installations. Field reversible, Five popular finishes, ships with 42" crossbar whichis field sizeable, Hex key dogging, 3/4"(19mm)throw latch bolt

    Ships with all mounting hardware and strike.

    88EO-
    As low as $878.63
  17. Von Duprin 8827 Exit Device

    Von Durpin 8827 surface mounted vertical rod devicesfor all types of single and double
    doors, UL listed for accident hazard installations.Covers stock hollow metal doors
    with 86 or 161 cutouts and fits door stiles as narrow as 3½" (90mm).

    ● Fully reversible
    ● Five popular finishes
    ● Field sizeable
    ● Hex key dogging
    ● 5/8"(16mm)throw latch bolt

    Ships with all mounting screws and the 299, 304L and 248L-4 Strikes.

    8827EO-
    As low as $1,323.19
  18. Von Duprin Exit Device 880NL Trim

    Von Duprin 88 Night Latch Trim

    Plate measures 3" wide by 14-3/16" long, with an 1-5/8" bore for cylinder.

    Von Duprin part # 880NL-R

    880NL
    As low as $174.19
  19. Von Duprin Exit Device 880DT Trim

    Von Duprin 88 Dummy Trim

    The plate measures 3" wide by 14-3/16" long.

    Von Duprin part # 880DT-R

    88DT-
    As low as $174.19
  20. Von Duprin Exit Device 880K Trim

    Von Duprin 880K Trim

    Plate measures 3" wide by 14-3/16" long with an 1-5/8" diameter bore for cylinder. Knob projects out 2-3/4".

    88K-
    As low as $210.05
  21. Von Duprin Exit Device 880TP Trim

    Von Duprin 880TP Trim

    The plate measures 3" wide by 14-3/16" long with an 1-5/8" bore hole for cylinder.

    Von Duprin part # 880TP-R

    88TP-
    As low as $174.19
  22. Von Duprin 33A Exit Device Only

    Von Duprin 33A Exit Device Only

    33A and 35A for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 35A has a smooth mechanism case and the 33A has grooved case. 33A/35A fits door stiles as narrow as 1 3/4". Newly designed device has a one piece center case cover.

    Plated Door Finishes

    33AEO
    $1,164.69
  23. Von Duprin 3327A Exit Device Only

    Von Duprin 3327A Exit Device Only

    3327A and 3527A for all types of single and double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 3527A has a smooth mechanism case and the 3327A has grooved case. 3327A/3527A fits door stiles as narrow as 1-3/4". Newly designed device has a one piece center case cover.

    3327AEO
    $1,702.37
  24. Von Duprin 386DT Dummy Trim

    Von Duprin 386DT Dummy Trim

    This Von Duprin 386DT Dummy Trim is just a pull handle. The bolt pattern of the trim plate lines up with the Von Durpin 33A on the inside so they are on conhesive unit. The base plate measures 7-15/16" by 1-5/8". The grip measures 8-1/2" by 4-5/16" with a 2-7/16" projection. This 386DT Dummy Trim is non handed.

    386DT
    $222.89
  25. Von Duprin 386NL Dummy Trim

    Von Duprin 386NL Dummy Trim

    This Von Duprin 386NL Night Latch Trim is just a pull handle. The bolt pattern of the trim plate lines up with the Von Durpin 33A on the inside so they are on conhesive unit. The base plate measures 7-15/16" by 1-5/8". The grip measures 8-1/2" by 4-5/16" with a 2-7/16" projection. This 386NL Night Latch Trim is handed. Uses a standard Rim Cylinder.

    386NL
    $464.26
  26. Von Duprin 360L Lever Trim

    Von Duprin 360L Lever Trim

    The Von Durpin 360L Lever Trim has a base measurement of 7-1/2" high by 1-11/16" wide and 7/8" thick. The lever is 4-1/2" and projects out 3". This lever Trim uses a 1-1/4" Mortise Straight Cam Cylinder.

    Von Duprin Part # 360L

    33L
    $504.74
View as Grid List

Items 1-36 of 612

per page
Set Descending Direction
Page