Monarch Panic Devices
Order your Monarch panic devices online today! Monarch panic devices along with their replacement hardware have been used in commercial businesses for at least a century. Depending on the specific product, these surface vertical rod, concealed vertical rod, rim, and mortise Monarch panic devices can be used on a few types of doors including single doors and double doors.
Install the high-quality Monarch panic devices on the doors in your facility. Stay up to date on repairs needed over time. When replacing a part becomes necessary, you can count on Robert Brooke & Associates to provide you with the right Monarch panic device parts for your repair.
Monarch panic devices have a Grade 1 rating, which is the highest score it can receive. Note: 904H List Door Hardware is typically found on all of the Monarch/Falcon panic devices.
Shop Monarch Panic Devices
Check out the Monarch panic devices that we sell online! This includes products from a few different Monarch/Falcon panic device series.
One Monarch panic device that we carry is the Monarch 19-R rim device. It is non-handed for left or right hand use on wood or metal doors. Color options include stainless, dark bronze, and aluminum in either 36 inches or 48 inches.
We also stock the Monarch 19-V which is a vertical rod Monarch panic device for use on wood or metal doors. The 19 Series devices are perfect for when low-cost, heavy-duty hardware is needed. Color options include aluminum and dark bronze in either 36 inches or 48 inches.
Another option we offer is the Monarch 24-R Series rim device. This non-handed Monarch panic device can be used on wood or metal doors. Color options include stainless steel, dark bronze, and aluminum for either a 28 to 36-inch door width or a 36.5 to 48-inch door width.
Another Monarch panic device that we stock is the Monarch 25-R rim device. This non-handed, heavy-duty Monarch panic device is made for use on wood or metal doors. Available colors include stainless steel, dark bronze, dark brown, and aluminum with door widths to choose from, as well.
You can also check out the Monarch 25-V vertical rod device, intended for use in high-traffic facilities. Available colors include dark bronze, brushed chrome, and aluminum for either a 36-inch wide by 84-inch high door or a 48-inch wide by 84-inch high door.
There are a number of replacement parts available to order for the 24 Series and the 25 Series. (Devices of the same price typically have very few parts available).
The XX Series Monarch panic devices were discontinued in 2019, but some of their replacement parts are still available to order from us. Be sure to check out the Monarch panic hardware we have available for when your Monarch panic device can use a repair. We have several replacement parts that might be necessary for your upgrade.
When ordering replacement parts for your Monarch panic device, you can select the color and style that match your device best. It is our goal to make your ordering process go as smoothly as possible when you order Monarch panic device parts from us.
Don’t hesitate to contact our office if you would like assistance with determining which replacement parts are meant to be installed with your Monarch exit device. If you can provide us with details about the Monarch exit device you are repairing, then we can point you in the right direction to the replacement parts you will need to fix it.
History of the Monarch Panic Device Company
The Monarch company was founded in Shepherdsville, Kentucky as a family-owned business in the 1920s. Monarch remained family-owned up until the 1990s when it was first sold to Newman Tonks PLC. It was later sold to Ingersoll-Rand in 1998.
You may have come across Monarch panic devices under a different brand name. Both Monarch and Dor-o-matic were rebranded to Falcon by Ingersoll-Rand in 2007. The Falcon line and others were then moved to the Allegion product line in 2012. At Robert Brooke & Associates, we carry the Monarch/Falcon panic devices to fit your needs!
When Will My Monarch Exit Device Package Ship?
While our warehouse has some of these Monarch panic devices in stock and ready to ship, some have a 1-week lead time and will ship a week after you order. If you order a custom-sized Monarch exit device, certain finishes, or certain replacement hardware, then these can take up to 2 weeks to ship as they are factory orders.
Contact Us With Order Inquiries
We can help to ensure that you are ordering the right Monarch panic devices for your door. Contact our office and our knowledgeable staff will be ready to answer your questions. Our office is open for calls Monday through Friday during EST business hours to provide assistance with your Monarch panic device order.
Place your order of Monarch panic devices today so that you receive it in no time! Soon enough, you will be ready to begin installing your device.
-
Monarch 19-24-25-XX Top Latch 588
Monarch 19-24-25-XX Top Latch 588
Monarch 19-24-25-XX Top Latch 588 for non Fire Rated Doors. This latch has a long history, the old number is 588, and the new number is 650389. A non Fire Rated door is usually an exterior door, or a door that is not designed to contain the spread of fire.
Falcon Part # 650389
G588 -
Falcon 650375 F-19-V/F24-V/F25-V/FXX-V Fire Rated Top Latch
The Falcon/Monarch Fire Rated Top Latch is used on the F-19-V, F-24-V, F-25-V, F-18-V and F-XX-V Surface Vertical Rods. The new number from Falcon is 650375, the old Monarch Number was F588. This latch is used on the above devices that are Fire Rated, meaning you can not dog these device in the Unlock Position. If your device has the ability to be dogged open, then use the G588 Non Fire Rated Version
GF588 -
Falcon Mechanical Electric Latch (MEL) Retrofit Kit 47867200
New for 2024 the Falcon MEL 47867200 Mechanical Latch Retraction. Retrofits all 1690, 1790, 24 and 25 Series devices to Mechanical Latch Retraction. This new system uses the PS902 Power Supply. The benefits for the MEL Series over the Older EL series are lower power draw (1 amp verse 16 amp), and more flexible power supply location, longer wire runs and thinner guage wires.
G47867200 -
Monarch Falcon 299 Strike for 25-R and 24-R Devices
Monarch Falcon 299 Strike for 25-R and 24-R Devices
The Monarch Falcon 299 Strike is used on the 25-R and 24-R Devices. The 299 strike measures 1-1/4" wide by 2-7/8" high with a slotted hole spacing of 2-1/8". The roller projects out 13/16". This strike is the same as the Von Duprin 299 Strike.
Ships with shim and mounting screws
Falcon Part # 299
Fa299 -
Monarch 712L Lever Trim
The Monarch 712L Lever Trim is used for the XX-C, 18-C, and all 24 Series Falcon Devices. The XX-C and 18-C are the obsolete concealed vertical rod Monarch Exit Devices. The Trim is non handed or field reversible. The Key locks or unlocks the Lever. The escutcheon measures 1-3/4" wide and 7-1/4" long.
712L- -
Monarch 24-R Series Rim Exit Device
Hand: Non-handed.
Finishes: US3 (605); US4 (606); US10 (612); US26 (625); US26D (626);
US32 (629); US32D (630); US28 (628), 313AN.
Strikes: 299 strike standard.
Latchbolt: Stainless steel, 3⁄4" throw.
Deadlocking Latchbolt: Standard.
Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out..
Doors: 1-3⁄4" thick, wood or metal. Specify thickness if other than 1-3⁄4".
Projection: 2-3⁄4" maximum, 2” dogged.
Mounting Height: 40-1⁄4" from CL to finished floor.
Fasteners: All mounting screws are concealed, sheet metal screws and machine
screws standard.
ANS I: Certified ANSI A156.3-2001 Grade 1 standards.
Center Case & Working Parts: Center case is heavy wrought and sintered metal parts.Call for pricing on non listed finishes
2 week lead time24EO-- -
Monarch 25-R Series Rim Exit Device
Monarch 25-R Series Rim Exit Device
Hand: Non-handed.
Finishes: US3 (605); US4 (606); US10 (612); US26 (625); US26D (626);
US32 (629); US32D (630); US28 (628), 313AN.
Strikes: 299 strike standard.
Latchbolt: Stainless steel, 3⁄4" throw.
Deadlocking Latchbolt: Standard.
Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out..
Doors: 1-3⁄4" thick, wood or metal. Specify thickness if other than 1-3⁄4".
Projection: 2-3⁄4" maximum, 2" dogged.
Mounting Height: 40-1⁄4" from CL to finished floor.
Fasteners: All mounting screws are concealed, sheet metal screws and machine
screws standard.
ANS I: Certified ANSI A156.3-2001 Grade 1 standards.
Center Case & Working Parts: Center case is heavy wrought and sintered metal parts.Call for pricing on non listed finishes
2 week lead time25EO- -
Monarch Falcon 25-V Vertical Rod Exit Device
Monarch Falcon 25-V Vertical Rod Exit Device
The Monarch Falcon 25-V is designed for high-traffic applications were added strength and durability are required. The device includes all strikes and mounting screws required for installation. Available in 3' and 4' devices, the 3' device is for doors 30" to 36", the 4' device is for doors that are 37" up to 48" wide. The vertical rods furnished with this device are for doors up to 7' tall, if your doors are taller, please contact us.
G25VEO- -
Monarch 19-R Exit Device
Monarch 19-R Exit Device
Hand: Non-Handed.
Functions: All functions built into “EO” device.
Finishes: Powder-coated aluminum–SP28; powder-coated duranodic–SP313;
Latchbolt: Stainless steel, 3⁄4" throw.
Deadlocking Latchbolt: Standard.
Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out.
Stock Sizes: 3'0" and 4'0"
Doors: 1-3⁄4" thick, wood or metal. Specify thickness if other than 1-3⁄4".
Projection: 2-1⁄2" maximum; 1-7⁄8" dogged.36" device is only 33-1/2" wide
48" device is only 43-1/2" wideG19EO- -
Monarch 19-V Exit Device
Monarch 19-V Exit Device
Hand: Field reversible.
Functions: All functions built into “EO” device.
Finishes: Powder-coated aluminum–SP28; powder-coated duranodic–SP313;
Latchbolt: Top stainless steel 3⁄4" throw. Bottom square bolt 1⁄2" throw.
Deadlocking Latchbolt: Standard.
Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out.
Stock Sizes: 3'0" and 4'0"
Doors: 13⁄4" thick, wood or metal.
Narrow Stile Doors: To 1-3⁄4" N.S. aluminum. With control trim–2-1⁄4" min. stile.
Projection: 2-1⁄2" max., 1-7⁄8" dogged.G19VEO- -
Monarch Exit Device 912L Lever Trim
Monarch Exit Device 912L Lever Trim
The 912L measures 7-1/4" high by 1-3/4" wide and the mounting plate is 5/8" thick. We ship these with the Dane Lever, which projects out 2-7/8" in the Classroom function. This lever is for use on the Monarch/Falcon 19 Series. On the Night Latch function the key locks and unlocks the lever handle, the Key Cylinder is not included. This lever trim is field reversible, so handing is not needed. We offer this Lever Trim in Painted Aluminum, Painted Dark Bronze, and Brushed Satin Nickel.
Monarch Part # 912L Dane
G912L- -
Monarch Exit Device 914KIL Lever Trim
Monarch Exit Device 914KIL Lever Trim
The 914KIL Lever Trim is for use on the Monarch / Falcon 19 Series. This lever trim is shipped with a standard Schlage C Keyway, that are keyed different if you are ordering multiple levers. The key locks and unlocks the Lever handle.
Monarch Falcon Part # 914KIL-KD
914KIL-KD- -
Monarch Dor-O-Matic 600339 NL Spring Package
The Monarch / Dor-O-Matic / Falcon 600339 NL Spring Package converts the 179L , 712L, 712K, 912l and 911K to an NL function. The NL function is one were the Lever Handle can not be unlocked and left in the unlocked position when the key is removed. Spring has a 5/8" diameter. See attached instructions.
G600339 -
Monarch 19 Series Chassis Assembly Cover
Monarch 19 Series Chassis Assembly Cover
This is the cover for the Monarch Falcon 19-R Rim Device. The cover measures 5-7/8" tall by 2-1/2" wide with a projection of 1-7/8". We sometimes find the number 6133 - 000 cast into the inside of the cover.
Monarch/Falcon part # 650384
Old Part # 6133G19R20 -
Monarch 17/18/19 Series Dogging Cover
Monarch 17/18/19 Series Dogging Cover
This Monarch 17/18/19 Series Dogging Cover goes over the dogging mechanism on the hinge side of the exit device. Sometimes when the end cap goes missing, this cover plate also disappears.
Monarch old part #s 195 and 194
Monarch/Falcon new part #'s 650297 and 650303G19R80 -
Monarch 19 Series End Cap Bracket
Monarch 19 Series End Cap Bracket
This steel bracket holds the hinge side of the panic bar on the door. The end cap then fits over it for a finished look. Bracket measures 1-5/8" tall by 1-1/4" wide with a 15/16" projection. Sometimes shipped with a mounting barrel nut and screw.
Monarch Falcon Part # 650320 or old part # 600108
G19R100B -
Monarch Trim Spring 4841
Monarch Trim Spring 4841
2-1/2" long x 3/16" diameter
Monarch part # 4841
G4841 -
Falcon Monarch Bottom Bolt Guide Assembly
Falcon Monarch Bottom Bolt Guide Assembly
The Falcon Monarch Bottom Bolt Guide Assembly 650387 is used the 19-V, 24-V, 25-V and the XX-V Bottom Rod. The Guide Assembly measures 1-7/8" tall by 1" wide and projects 1-9/16" at the widest projection. The Bottom Bolt Guide is made of zinc plated steel.
Falcon Monarch Part # 650387
G650387
