Parts| Von Duprin Exit Devices

We carry an extensive selection of exit device hardware, from retainer hubs and auxiliary kits to latch bolt springs and hex studs. Browse our online store for affordable exit device parts that you will need to install or repair your device.

Having the right exit device hardware for your device will help to ensure that your building will be secure and meet mandatory code requirements. Keeping these devices up to date with exit device replacement parts will help to further ensure building security. The exit device parts that we sell are made by top-tier manufacturers that demonstrate a standard of excellence when making their products.

We offer a variety of exit device replacement parts including dog keys, end caps, mounting base kits, surface and rim strikes, springs, screws, brackets, and so much more. Look at the manufacturer information to be sure that you are ordering the correct exit device part for your device! We encourage you to contact us if you have any questions so that you receive the appropriate exit device hardware for your device.

Our website offers a convenient way to purchase exit device parts from different manufacturers all in one place. When you shop with Robert Brooke & Associates, you can be certain that you will receive reliable, well-made, and long-lasting exit device parts with high performance rates. With our ample supply of some of the finest exit device parts on the market, you can be sure that your facility will remain safe and secure, while also providing a simple and efficient way for people to use exit doors in an emergency.

Order Your Exit Device Parts Right Here

Our selection of exit device replacement parts includes an array of options to fit your specific needs. From rim exit device parts to mortise exit device parts, we have a range of products that are designed to meet the demands of any commercial or institutional setting. Our exit device parts are made from high-quality materials and are built to withstand heavy use and abuse, ensuring that they will last for years to come.

Each brand has its own set of exit device hardware. Some of the exit device parts are interchangeable with other brand parts. Below are some examples of exit device parts that we regularly stock and sell online.

  • End Caps
  • We stock several styles of Adams Rite end caps. We have metal end caps for this brand’s concealed vertical rod and mortise devices, plus we have metal end caps for their surface vertical rod devices which can also serve as a replacement for the plastic version. We also offer their plastic end cap. This exit device part occasionally will have the number HX0471 cast into it. We also carry their EX88 and EX89 end caps, EX76 end caps, and more! Check out our end caps from other brands, as well.

  • Strikes
  • Another common exit device part that we carry is the strike for various devices and brands. You will want to be sure you are ordering a strike that matches up with the brand of your device. For example, the 938 Surface Strike made by Cal Royal is designed for use on the brand’s 7700 and 5000 Series rim devices. 

    Again, some strikes are interchangeable with strikes from other brands. This includes the Monarch/Falcon 299 Strike designed for use with the 24-R and 25-R Devices which is the exact same exit device part as the Von Duprin 299 Strike. We also stock electric strikes, dust-proof strikes, roller strikes, and more. 

  • Springs
  • We also have springs for many devices and brands. One example of this is the Sargent Lever Return Spring designed for use on the lever trims of their Sargent devices. There are also other types of springs such as the 90 Series Mouse Trap Spring designed for use with the Sargent 9898 Rim Device.

  • Pins
  • Some devices also require another exit device part that is typically referred to as a pin. For instance, we carry the control link pin and the lever trim shear pin kit for use with Von Duprin devices. You can also find push bar pins, pivot pins, dogging pins, and more on our site for many brands.

  • Keys
  • Keys are used for a number of device styles. We have dog keys, dogging hex keys, cotter keys, and more.

  • Brackets
  • A bracket is another commonly used exit device part that you might need to order a replacement for over time. Many brands make devices that require some sort of bracket. Brackets come in several styles such as latch bracket, lift bracket, dogging bracket, pinion support bracket, push bar anchor bracket, mounting bracket, spring tube bracket, mullion bracket, release bracket, and more.

  • Guides
  • You can also order guides on our website for use with specified brands. This includes top bolt guides, bottom bolt guides, rod guides, push bar guides, tailpiece guides, and more. 

  • Solenoids
  • We offer solenoids such as the Adams Rite EL8600 Solenoid 31-0833-IP which is designed for use with their Concealed Vertical Rod, the 12-volt or 24-volt Adams Rite EL8800 Solenoid, and the Von Duprin 050535 El Solenoid which is compatible with their 33A, 35A, 98, and 99 devices along with the Dor-O-Matic/Falcon EL1690, EL1790, and EL2390 devices. Browse our assortment of solenoids for more information.

That’s not all. We also offer so many more exit device parts and accessories. From cover plates and compression springs to dogging kits and trim sets, we have everything you need to ensure that your panic devices are functioning properly and are up to building code. Our exit device hardware is designed to be easy to install and use, making it a great choice for any facility.

Contact Our Team of Experts at Robert Brooke & Associates with your Exit Device Part Questions!


At Robert Brooke & Associates, we are committed to providing our customers with the highest level of service and support. Our team of experts is always available to answer any questions you may have and to help you find the right products for your needs. We also offer fast and reliable shipping, so you can get the products you need when you need them.


So if you are looking for well-built, unyielding exit device hardware, look no further than Robert Brooke & Associates. With our wide selection of products and our commitment to customer satisfaction, we are the go-to source for all your exit device part needs.

Filter
View as Grid List

Items 1-36 of 198

per page
Set Descending Direction
Page
  1. Exit Device Dog Key 5/32" x 3-1/16"

    Rating:
    100%

    5/32" Dog Key used on old Von Durpin, and Dor-o-Matic exit devices. This key has the longer shaft to fit into the deeper Von Duprin dogging slots.

    5/32" hex key

    3-1/16" overall length

    88R60
  2. Von Duprin Strike 1409

    Von Duprin Strike 1409

    This Von Duprin Strike is used for the bottom latch of the 22, 33, 33A, 55, 88 and 99 Rim Devices.  Also known as a Blade Stop.

    1409
    $161.05
  3. Von Duprin Strike 264

    Von Duprin Strike 264

    This strike measures 2-7/8" tall by 1-1/4" wide with a roller projection of 9/16". Used on the Von Duprin 22, 88, 98 and 99 when a lower profile strike is need in place of the Von Duprin 299 Strike. The hole spacing is 2-1/8" on center, and it ships with mounting screws and a shim. Also known as a Von Duprin Surface Roller Strike.

    264
    $107.68
  4. Von Duprin Strike 385A

    Von Duprin Strike 385A

    The Von Duprin 385A Strike is used on the floor for the Von Duprin 2227, 8827, 9827 and 9927 Surface Vertical Rods. The strike face plate outside dimensions are 2-1/4" x 2-1/4" with an inside dimension of 1-1/8" by 1". This floor strike features a bolt that can be cemented into the floor. Zinc plated finish.

    385A
    $123.48
  5. Von Duprin Strike 1609

    Von Duprin Strike 1609

    This strike is used when we have a double door application without a center post. By using this strike we can have one door with a surface vertical rod and one door a rim device, which will save money because vertical rods are usually expensive. This strike can be used with the Von Duprin 22/2227, 88/8827, 98/9827 and 99/9927 combinations, but not with the Fire Rated Versions. The strike base measures 1-1/16" wide by 3-1/4" high, the lip projects out 7/8". The three slots are 1-1/4" on center. This strike ships with the mounting screws.

    US19-Black finish

    1609
    $104.38
  6. Von Duprin Strike 299

    Von Duprin Rim Strike 299

    The Von Duprin 299 Strike is used on the 22, 88, 98, and 99 Rim Devices and also as a Top Strike on the 2227, 8827, 9927, and 9827 Surface Vertical Rod Panic Devices. The 299 strike measures 1-1/4" wide by 2-7/8" high with a slotted hole spacing of 2-1/8". The roller projects out 13/16".

    Ships with shim and mounting screws

    299
    $65.95
  7. Von Duprin Strike 299F

    Von Duprin Strike 299F

    The Von Duprin 299F Strike is used on the 22, 88, 98, and 99 Fire Rated Rim Devices (no hex or cylinder dogging). The 299F strike measures 1-1/4" wide by 2-7/8" high with a slotted hole spacing of 2-1/8". The roller projects out 13/16". The non fire rated version would be the Von Duprin Strike 299.

    Ships with shim and mounting screws

    299F
    $82.02
  8. Von Duprin Strike 304L

    Von Duprin Strike 304L

    This Von Duprin Strike is used for the bottom latch of the 2227, 8827, 9827 and 9927. The strike measures 1-7/8" by 1-7/8" outside dimension of the square flange, with an inside dimension of 1-1/8" by 1-1/8". The part that is inserted into the floor is 1-3/8" x 1-3/8" and drops down 13/16". Also known as a Von Duprin Floor Mounted Mortise Strike.

    304L
    $58.16
  9. Von Duprin 88 Active Case

    Replacement Von Duprin 88 Rim Device Center Case

    Includes all of the internal parts and hardware. This case works with all Exit Only, Dummy and Night Latch Trims. Call or email us if you have a Lever, Knob or Thumb Piece Trim.

    Von Duprin Part # 050409
    Old Part # 101662

    88R10
    As low as $721.13
  10. Von Duprin Exit Device 88 and 55 Wedge Tite Screw

    Von Duprin 88 and 55 Wedge Tite Screw.

    This screw applies pressure to the wedge which then expands the wedge ring to key the Von Duprin 88 and 55's crossbars tite.

    Von Duprin Part # 090081

    88R100
    $2.30
  11. Von Duprin Exit Device 88 Tube Attaching Ring

    Von Duprin Exit Device 88 Tube Attaching Ring

    Von Duprin 55 and 88 Tube Attaching Ring.

    Used as a sleeve the wedge tite screw and wedge use to apply pressure to the crossbar. Measures 15/16" long by 13/16" diameter.

    Von Duprin Part #090021
    Old Part # 965676

    88R110
    $11.27
  12. Von Duprin Exit Device 88 and 55 Cross Bar

    Von Duprin Exit Device 88 and 55 Cross Bar

    Von Duprin 55 and 88 Cross Bar.

    42" Cross bar is sent, you cut to size in the field.

    Von Duprin Part # 050004
    Old Part # 967738

    88R120-
    As low as $240.25
  13. Von Duprin 88 Latch Tail Springs

    Von Duprin 88 Latch Tail Springs

    This is the spring that pushes the latch bolt out. Used on all Von Duprin 88 Rim Devices. The spring measures 2-5/8" long by 3/16" diameter.

    Sold in packages of 2.

    Von Duprin Part #050393

    88R130
    $12.27
  14. Von Duprin 88 Hinge Case Spring

    Von Duprin 88 Hinge Case Spring

    Used on all Von Duprin 88, 8847, 8827 and 8827 Exit Devices. 4-1/2" long x 5/16" diameter.

    Von Duprin Part # 090080

    88R140
    $7.68
  15. Von Duprin 88 End Case

    Von Duprin 88 End Case

    Replacement Hinge Side case for the Von Duprin 88, 8827, 8847, and 8875 exit devices. Includes all of the internal workings (spring ect...).

    Von Dupin Part # 050435

    88R20
    As low as $240.25
  16. Von Duprin 88 Spring Tube Bracket

    Von Duprin 88 Spring Tube Bracket

    This bracket holds the hinge case spring tube in place. The screws are included with the bracket.

    Von Duprin Part # 050477
    Old Part # 969369

    88R210
    $16.57
  17. Von Duprin 88 Spring Stop Assy

    Von Duprin 88 Spring Stop Assembly

    This is the piece that holds the hinge case spring in place. It is used on all of the Von Durpin 88 models.

    Von Duprin Part # 050451
    Old Part #107682

    88R220
    $21.61
  18. Von Duprin 88 Master Cam

    Von Duprin 88 Master Cam

    This is inside the Von Duprin 88 Rim Device and is the piece that the key cylinder moves to lock and unlock the exit device.

    Von Durprin part # 050501
    Old Part # 951960

    88R230
    $38.36
  19. Von Duprin Exit Device 88 Mounting Screws

    Von Duprin Exit Device 88 Mounting Screws

    This mounting screw package is used on the 88 Exit Device, there description is 88C/C or E/C Mtg Pkg (CS and MS). The package includes 12 screws, 6 of each type.

    Von Duprin Part # 900503
    .

    88R30
    $19.96
  20. Von Duprin Exit Device 88 Axle Package

    Von Duprin Exit Device 88 Axle Package

    Von Duprin 88 Axle Package

    New style axle snaps together, and replaces the old style which were screwed together with allen wrenches. This style of axle has been around since about 1990. The piece on the right is only used for taking the axle apart.

    Von Duprin Part # 090006 or 090082

    88R40
  21. Von Duprin 88 Dog Screw

    Von Duprin 88 Dog Screw. Newer style, after 1975 or so. If you have an older exit device you will want to order the D100 Panic Bar Retainer.  The Old Style Dog Screw are no longer made.

    Von Duprin 88 dog screw 14 threads per inch

    Von Duprin Part # 090083

    88R50
    $9.21
  22. Von Duprin Exit Device 88 Lever Arm Left Hand

    Von Duprin Exit Device 88 Lever Arm Left Hand

    Von Duprin 88 replacement lever arm for all the Von Duprin 88 exit devices. The arm includes the Wedge, Wedge Ring, Wedge Tite Screw and Dog Screw, and sometimes the axle.

    Von Dupin part # 050439
    Old Part # 100729

    88R70-
    As low as $236.10
  23. Von Duprin Exit Device 88 Lever Arm Right Hand

    Von Duprin Exit Device 88 Lever Arm Right Hand

    Von Duprin 88 replacement lever arm for all the Von Duprin 88 exit devices. Includes the dog screw, wedge ring, wedge tite screw and wedge, and sometimes they come with the axle

    Von Duprin Part # 050438
    Old Part # 100744

    88R80-
    As low as $236.10
  24. Von Duprin Exit Device 88 Wedge Ring

    Von Duprin Exit Device 88 Wedge Ring

    The Wedge Tite Screw applies pressure on the Wedge which expands the Tube Attaching Ring to grip the Cross Bar. Measures 5/8" on the flat edge.

    Von Duprin Part # 090020
    Old Part # 956520

    88R90
    $6.98
  25. Von Duprin Exit Device 8827 Top Latch Case

    Von Duprin 8827 Top Latch Case for non fire rated doors. This is the part that may be causing your bottom latch to drag on the floor. The Top Latch does all the work on the Von Duprin 8827. When the Top Latch is retracted, it holds the rods in the retracted postion.

    Von Duprin part # 050460
    Old Part # 101750

    88VR10
    $211.68
  26. Von Duprin Exit Device 8827 Bottom Vertical Rod Assembly

    Von Duprin 8827 Bottom Vertical Rod Assembly

    This bottom vertical rod is used on non fire rated doors. The rod includes the bottom rod connector.

    Von Duprin Part #050455
    Old Part #101777 and 103234

    88VR150-
    As low as $140.02
  27. Von Duprin 8827 Bottom Rod Connector

    Von Duprin 8827 Bottom Rod Connector.

    Connects bottom rod to the bottom latch. The Bottom Rod Connector is included with the Von Durpin Bottom Rod.

    Von Duprin Part # 050327
    Old Part #960578

    88VR160
    $21.83
  28. Von Duprin Exit Device 8827 Bottom Latch Case

    Von Duprin 8827 Bottom Latch

    Used on all Von Duprin 8827 non fire rated exits. Included mounting screws.

    Von Duprin Part # 050461
    Old part # 101751

    88VR170
    $211.68
  29. Von Duprin Exit Devices 8827 Latch Covers

    Von Duprin 8827 replacement latch covers

    Latch covers come with matching screws

    Von Duprin Part # 050464
    Old Part # 960548

    88VR30-
    As low as $96.62
  30. Von Duprin Exit Device 8827 Top Rod Connector

    Von Duprin 8827 Top Rod Connector

    Inserts into rod so the latch can connect to the rod. The top vertical rod does not ship with the top rod connector!

    Von Duprin Part # 050279
    Old Part # 960577

    88VR50
    $22.63
  31. Von Duprin 8827 Exit Device Rod Guide Assembly

    Von Duprin 8827 Rod Guide Assembly

    Securely holds rod in place and protects rod from bending.

    Von Duprin Part # 050482
    Old Part # 101648

    88VR80-
    As low as $100.50
  32. Von Duprin Exit Device 22, 33, And 99 Dogging Shaft 090040

    The Von Duprin 22, 33, 33A, 98 and 99 dogging shaft is the current dogging shaft. And has been in production since 1998.   If your device is from before 1998, then you would use the 050709.   This is the piece that the dogging key would fit into. The shaft is for a 5/32" dog key. #4 on diagram

    Von Duprin Part # 090040

    G090040
    $10.75
  33. Von Duprin Exit Device Dogging Spring 090041

    Von Duprin Exit Device Dogging Spring

    Von Duprin dogging assembly part 090041

    #3 on diagram

    Von Duprin part #090041
    Sold individually

    G090041
    $12.13
  34. Von Duprin Exit Device Dogging Adaptor Spring 090042

    The Von Duprin Exit Device Dogging Adaptor Spring 090042 locks the Dogging Adaptor 090043 into the dogging mounting bracket.

    Von Duprin dogging assembly part 090042
    sold individually

    #2 on diagram

    G090042
    $10.75
View as Grid List

Items 1-36 of 198

per page
Set Descending Direction
Page