Von Duprin

For the past 45 years Robert Brooke and Associates has been a leader in Von Duprin Exit Devices, either complete or repair hardware.  Whether you have the economical 22 Series or the higher end 98/99 Series we have the hardware you need.  Call and speak with product experts!

Filter
View as Grid List

Items 1-36 of 200

per page
Set Descending Direction
Page
  1. Von Duprin 22 Exit Device Only

    Von Duprin 22 Exit Device Only

    Von Duprin 22 rim exit device for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3, 2001, Grade 1. Covers stock hollow metal doors with 161* cutouts. Fits door stiles as narrow as 3 13/16"

    Ships with all mounting screws and the 299 strike.

    22EO
    As low as $431.09
  2. Von Duprin 22 Metal End Cap 900397

    The Von Duprin 22 Mechanism Metal End Cap 900397 is new for 2016.  This new kit replaces the 900397 with a metal end cap, which is has always been a weak link of the 22 series.  The package includes the End Cap, Bracket and the Mounting Screws.  This cap and bracket will work on all of the 22 and 2227 series. 

    Von Duprin part # 900397

    G22R10M-
    As low as $39.76
  3. Von Duprin 2227 Exit Device Only

    Von Duprin 2227 Exit Device Only

    Von Duprin 2227 surface mounted vertical rod exit device for all types of single and double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3, 2001, Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. Fits door stiles as narrow as 3-5/8". For doors as high as 7'1", if your door is higher than 7'1", please call.

    Ships with all mounting screws and the 299, 304L and 248L-4 Strike

    Von Duprin Part # 2227EO

    2227EO-
    As low as $768.38
  4. Von Duprin 2670 Guard-X Exit Device

    Heavy Duty Design
    The new Series 2670 Exit Alarm Lock provides secure protection through a large stainless steel deadbolt, which is 2" x 1/2" (51mm x 13mm) and has over a 3/4" (19mm) throw. The engagement area into the strike is over 1 1/4" (32mm) square inches. The cast aluminum latch case protects the internal mechanism and resists tampering or vandalism from inside the door. This unit has been tested to withstand up to 1600 pounds of static load force against the door.

    Fits 36" to 48" doors.
    Uses 9 volt battery
    Ships with all mounting hardware and strike.

    2670EO-
    As low as $641.21
  5. Von Duprin 99 Exit Device Only

    The Von Duprin 99 rim exit devices for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The Von Duprin 98 device has a smooth mechanism case and the Von Duprin 99 device has a grooved case. The rim device is non-handed.

    Ships with all the mounting screws and the 299 Strike.

    99EO
    As low as $1,350.51
  6. Von Duprin 9975 Exit Only

    Von Duprin 9875/9975 mortise lock device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Fits stock hollow metal doors with 86 cutout and door stiles as narrow as 4-3/4" (121mm). The Von Duprin 9875 device has a smooth mechanism case and the Von Duprin 9975 device has a grooved case. The mortise lock device is non-handed

    9975EO
    As low as $2,849.76
  7. Von Duprin 360L Lever Trim

    Von Duprin 360L Lever Trim

    The Von Durpin 360L Lever Trim has a base measurement of 7-1/2" high by 1-11/16" wide and 7/8" thick. The lever is 4-1/2" and projects out 3". This lever Trim uses a 1-1/4" Mortise Straight Cam Cylinder.

    Von Duprin Part # 360L

    33L
    $661.09
  8. Von Duprin 386DT Dummy Trim

    Von Duprin 386DT Dummy Trim

    This Von Duprin 386DT Dummy Trim is just a pull handle. The bolt pattern of the trim plate lines up with the Von Durpin 33A on the inside so they are on conhesive unit. The base plate measures 7-15/16" by 1-5/8". The grip measures 8-1/2" by 4-5/16" with a 2-7/16" projection. This 386DT Dummy Trim is non handed.

    386DT
    $270.31
  9. Von Duprin 386NL Dummy Trim

    Von Duprin 386NL Dummy Trim

    This Von Duprin 386NL Night Latch Trim is just a pull handle. The bolt pattern of the trim plate lines up with the Von Durpin 33A on the inside so they are on conhesive unit. The base plate measures 7-15/16" by 1-5/8". The grip measures 8-1/2" by 4-5/16" with a 2-7/16" projection. This 386NL Night Latch Trim is handed. Uses a standard Rim Cylinder.

    386NL
    $656.72
  10. Von Duprin Exit Device 880NL Trim

    Von Duprin 88 Night Latch Trim

    Plate measures 3" wide by 14-3/16" long, with an 1-5/8" bore for cylinder.

    Von Duprin part # 880NL-R

    880NL
    As low as $343.57
  11. Von Duprin Exit Device 880DT Trim

    Von Duprin 88 Dummy Trim

    The plate measures 3" wide by 14-3/16" long.

    Von Duprin part # 880DT-R

    88DT-
    As low as $296.58
  12. Von Duprin Exit Device 880K Trim

    Von Duprin 880K Trim

    Plate measures 3" wide by 14-3/16" long with an 1-5/8" diameter bore for cylinder. Knob projects out 2-3/4".

    88K-
    As low as $317.57
  13. Von Duprin Exit Device 880TP Trim

    Von Duprin 880TP Trim

    The plate measures 3" wide by 14-3/16" long with an 1-5/8" bore hole for cylinder.

    Von Duprin part # 880TP-R

    88TP-
    As low as $354.31
  14. Von Duprin 990DT Trim

    The Von Duprin 990DT Trim is the standard Dummy Trim for the 99 and 98 Series devices.  The plate is constructed of Bronze or Stainless Steel and then plated to the desired finish.  The plate measures 3" wide by 14-3/16" tall, and includes the mounting screws.  The stanchions coming off the back of the plate line up with the center case mounting screws.

    Von Duprin Part # 990DT-R&V

    99DT-
    As low as $307.79
  15. Von Duprin Exit Device 99 Lever Trim

    The Von Duprin 996L Lever Trim replaces the 992L, and 994L and is the latest generation of the 99 Lever Trim.

    The escutcheon plate measures 2-3/4" wide by 10-3/4" high and projects out 27/32". The handle projection is 2-7/8". This lever handle is handed, but is field reversible. Key lock and unlocks lever.

    ver.

    99L
    As low as $593.10
  16. Von Duprin Exit Device 990NL Trim

    The Von Duprin 990NL Trim is the standard NIght Latch Trim for the 99 and 98 Series devices.  The plate is constructed of Bronze or Stainless Steel and then plated to the desired finish.  The plate measures 3" wide by 14-3/16" tall, and includes the mounting screws.  The stanchions coming off the back of the plate line up with the center case mounting screws.  The Rim Cylinder shown in the picture is not included.

    Von Duprin Part # 990NL-R&V

    99NL
    As low as $358.50
  17. Von Duprin Exit Device 990TP Trim

    The Von Duprin 990TP Trim is the standard Thumb Piece Trim for the 99 and 98 Series devices.  The plate is constructed of Bronze or Stainless Steel and then plated to the desired finish.  The plate measures 3" wide by 14-3/16" tall, and includes the mounting screws.  The stanchions coming off the back of the plate line up with the center case mounting screws.  The key cylinder locks and unlocks the thumb piece.  The Rim Cylinder shown in the picture is not included.

    Von Duprin Part # 990TP-R&V

    Cylinder not included.

    99TP
    As low as $477.36
  18. Von Duprin Exit Device 22 Rim Center Case Cover

    Von Duprin Exit Device 22 Rim Center Case Cover

    Replace your old or missing Von Duprin 22 Cover. This cover comes in aluminum or dark brown finishes.

    Von Duprin part # 968603 SP28 or SP313

    G22R30
    As low as $66.12
  19. Von Duprin Exit Device 2227 Bottom Vertical Rod 109362

    Von Duprin 2227 Bottom Vertical Rod

    The length of the bottom vertical rod is set at the factory. All the bottom rods are the same length because of ADA standards. The top rods are field adjustable.

    Von Duprin part # 109362

    G22VR110-
    As low as $136.46
  20. Von Duprin 88 Active Case

    Replacement Von Duprin 88 Rim Device Center Case

    Includes all of the internal parts and hardware. This case works with all Exit Only, Dummy and Night Latch Trims. Call or email us if you have a Lever, Knob or Thumb Piece Trim.

    Von Duprin Part # 050409
    Old Part # 101662

    88R10
    As low as $721.13
  21. Von Duprin Exit Devices 8827 Latch Covers

    Von Duprin 8827 replacement latch covers

    Latch covers come with matching screws

    Von Duprin Part # 050464
    Old Part # 960548

    88VR30-
    As low as $96.62
  22. Von Duprin 8827 Exit Device Rod Guide Assembly

    Von Duprin 8827 Rod Guide Assembly

    Securely holds rod in place and protects rod from bending.

    Von Duprin Part # 050482
    Old Part # 101648

    88VR80-
    As low as $100.50
  23. Von Duprin Strike 264

    Von Duprin Strike 264

    This strike measures 2-7/8" tall by 1-1/4" wide with a roller projection of 9/16". Used on the Von Duprin 22, 88, 98 and 99 when a lower profile strike is need in place of the Von Duprin 299 Strike. The hole spacing is 2-1/8" on center, and it ships with mounting screws and a shim. Also known as a Von Duprin Surface Roller Strike.

    264
    $107.68
  24. Von Duprin Strike 385A

    Von Duprin Strike 385A

    The Von Duprin 385A Strike is used on the floor for the Von Duprin 2227, 8827, 9827 and 9927 Surface Vertical Rods. The strike face plate outside dimensions are 2-1/4" x 2-1/4" with an inside dimension of 1-1/8" by 1". This floor strike features a bolt that can be cemented into the floor. Zinc plated finish.

    385A
    $123.48
View as Grid List

Items 1-36 of 200

per page
Set Descending Direction
Page