Stops / Holders

Door Stops / Holders
Selling door stops / holders for Glynn Johnson, Ives, Burns Manufacturing,
Rixson, International Door Closer,  and Grand Specialties for the
past 40 years.

Make sure you click the Text or Image of the Door Stop / Holder
for more information, including the finishes and dimensional information.

Filter
View as Grid List

8 Items

per page
Set Descending Direction
  1. Gravity Door Coordinator 9 Inch

    Gravity Door Coordinator 9"

    When active door is open, coordinator prevents active door from closing until inactive door bypasses. Closing of inactive door causes strike plate on top of door to contact cam and lift arm, allowing active door to close. As inactive door continues closing, roller rides over strike plate on to door bracket, holding arm above active door.
    Non-handed.
    Gravity action arm and door bracket are adjustable on the job for ease of installation. Rubber roller provides quiet and efficient operation, and helps protect the astragal and doors from damage. Nylon roller on short arm glides smoothly over door bracket and strike, ensuring silent operation. Made of forged brass.
    COR9G-26D for use on pairs of doors with astragal on active door over 4' or with astragal on inactive door over 3'4" or with astragal on both doors over 2'10" Brushed Chrome Finish.

    Ives part # COR9G-26D 9" Arm Projection

    COR9G
  2. Metal Door Automatic Flush Bolts FB31P

    Metal Door Automatic Flush Bolts FB31P

    Fully automatic-inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened. The Ives FB31P Body is 1” wide by 6-3/4” long and 2” deep. Bolt throw is 3/4” with a 7/8” adjustment with a 3/4” backset,  standard rod is 12” which is measured from the center of latch body to the bolt tip.

    Rods are also available in 18”, 24” and 36”, call for pricing.  We ship the 12” rods, and this set would include the top and bottom latches.

    3 Hour UL Listed

    Ives Part # FB31P

    FB31P-
    As low as $195.14
  3. Wood Door Constant Latching Flush Bolt FB61P

    Wood Door Constant Latching Flush Bolt FB61P

    The Ives FB61P is used on the inactive leaf of wood fire doors.   The latch remains extend until the active door is opened.   When the active door is opened the latches retract, and extend when the active door is closed.  The bodies measure 1” wide by 8-1/2” tall and 2” deep.  The bolt throw is 3/4” with a 7/8” vertical adjustment, and has a 3/4” backset.   This package comes with the top and bottom flush bolts with screws and strikes.

    90 minute UL Rated.

    Ives Part # FB61P

    FB61P-
    As low as $179.70
  4. Wall Mounted Door Holder / Stop WS45

    Wall Mounted Door Holder / Stop WS45

    • Constructed of cast brass, bronze or aluminum.
    • Spring loaded roller rides up the face of the strike, seating itself on the strike, holding the door firmly in the open position.
    • A heavy rubber pad cushions the shock and absorbs the sound.
    • With unit mounted on door and the strike on wall, vertical adjustment is available on body.
    • The strike is adjustable 45 degrees left or right, both adjustments easily accomplished at time of installation or at a later date.

    WS45 strike is furnished with wood screws for drywall mounting.

    GJW45A-
    As low as $131.10
  5. Gravity Door Coordinator

    Gravity Door Coordinator

    When active door is open, coordinator prevents active door from closing until inactive door bypasses. Closing of inactive door causes strike plate on top of door to contact cam and lift arm, allowing active door to close. As inactive door continues closing, roller rides over strike plate on to door bracket, holding arm above active door.
    Non-handed.
    Gravity action arm and door bracket are adjustable on the job for ease of installation. Rubber roller provides quiet and efficient operation, and helps protect the astragal and doors from damage. Nylon roller on short arm glides smoothly over door bracket and strike, ensuring silent operation. Made of forged brass.
    COR7G-26D for use on pairs of doors with astragal on active door up to 4' or with astragal on inactive door up to 3'4" or with astragal on both doors up to 2'10" Brushed Chrome Finish.

    Ives part # COR7G-26D 7" Arm Projection

    1836
  6. LCN SEM7830-516 Magnet Core Assembly

    LCN SEM7830-516 Magnet Core Assembly

    Tri Voltage Magnet Core only. 35 pounds of holding force at nominal input voltage. Maximum current draw is .020 A @ 24 volt and 120 volt, and .030 A @ 12VDC.

    LCN part number SEM7830-516

    SEM7830-516
    $187.24
  7. LCN SEM7840-516 Magnet Core Assembly

    LCN SEM7840-516 Magnet Core Assembly

    Tri Voltage Magnet Core only. 35 pounds of holding force at nominal input voltage. Maximum current draw is .020 A @ 24 volt and 120 volt, and .030 A @ 12VDC. Cylinder is 1-3/4" diameter and projects out 7/8" out from the mounting plate.

    LCN part number SEM7840-516

    SEM7840-516
    $187.24
  8. Rixson Checkmate Overhead Door Holder 10 Series

    Rixson Checkmate Overhead Door Holder 10 Series

    Product Description & Features
    •Single acting doors
    •Non-handed
    •Slide track design
    •Recommended for medium traffic,
    medium weight doors

    GR10
    $190.09
View as Grid List

8 Items

per page
Set Descending Direction