Partition Parts
Robert Brooke & Associates is a leading commercial bathroom stall hardware parts provider with over 35 years of experience in the stalls and toilet partition hardware industry. We have worked with various organizations throughout the years to provide them with everything they need for their commercial restrooms including bathroom partition hardware. We have had the pleasure of distributing bathroom stall hardware for schools, churches, athletic centers and other facilities with heavy restroom traffic.
We sell a variety of bathroom stall hardware including but not limited to brackets, coat hooks, door pulls, hinges, latches, keepers and stoppers. For high-quality, affordable commercial bathroom stall hardware, look no further than Robert Brooke & Associates.
Restroom Stall Parts Manufacturers
If you like to purchase bathroom stall hardware and equipment from reputable brands, you’ll be pleased to know that we carry hardware from some of the most trusted restroom stall hardware manufacturers in the industry. You can be confident when placing your order with us knowing that we only sell restroom stall parts from highly respected brands.
The manufacturers that we distribute parts from produce strong and durable bathroom stall hardware that lasts for a long time. These are United States and Canadian companies whose main focus is manufacturing quality-made restroom stall hardware for consumers. A few of these restroom stall hardware brands also have an extended inventory that includes washroom accessories.
As suppliers of the Grade A products that these brands create, we are used to seeing satisfied customers who order bathroom stall hardware from our online store. Let us know if you come up with any questions about one of the restroom stall parts brands and we will assist you promptly.
Our Bathroom Stall Parts Supply
We have many parts to choose from in our supply of bathroom partition hardware. Be sure to choose the correct bathroom stall hardware before you place your order.
A specific brand of bathroom stall door hardware might only be of good use on that specific brand of stall, so check the name tag on your toilet stalls before shopping for your parts. For example, you will only be able to use an Accurate Bolt Latch Slide Pin on metal stalls that were manufactured by the Accurate brand.
We also sell other bathroom stall door hardware that will only work on stalls made out of a specific material. The Flush Metal Top Hinge Pin ⅜ inch X 3-¼ inch is one example of restroom stall hardware that was made to be used on laminate stalls. You will find that some of the other bathroom partition hardware we carry should only be used on laminate stalls.
There are some bathroom stall parts that we sell that will work with more than one brand of partitions. For example, the Cast Stainless Steel Slide Bolt Latch that is 1-½ inch W X 3-¼ inch L, 2-¾ inch between screws is a piece of stainless steel bathroom stall hardware that can be used on both Accurate and Global stalls.
We have pages and pages of bathroom stall hardware to look through. If you already know exactly what restroom stall hardware you need, then you might want to make it easier by narrowing your search in our Search Bar. To get more information on our supply of bathroom stall parts, please visit our RBA Partitions and Parts Catalog.
Questions About Bathroom Stall Hardware
Please direct your bathroom stall hardware related inquiries to our main office by phone call or email. The team at Robert Brooke & Associates is ready to answer your questions about the bathroom stall door hardware that we carry.
Please contact us during business hours so that we can help you out if you get stuck on something while shopping our bathroom stall door hardware selection. Call our phone at 1 (800) 642-2403 or send an email to one of our professionals at Sales@RobertBrooke.com.
-
Torx driver bit T27
Torx driver bit T27 for toilet partition security screws. These torq heads screws are used with brackets that hold the partitions together. This torx bit is for a T27 size and is hollow for a screw with a pin sticking out in the middle of head of the screw and uses a 1/4" shank bit.
TBIT -
Full Length Door Stop for 3/4" Material
Full length aluminum door stop for 3/4" material used with phenolic commercial toilet partitions or posts that are 3/4" thick. This product will help any gap from the front view of the toilet stall door on the latch side. For an out swing door the slide bolt latch locks onto the opposite side of the bumper. For an in swing door the kit comes with a simple stainless steel keeper that is mounted on the inside of the stall on the post for the latch to lock to. This kit is used for an inswing or an outswing door. The spec sheet is attached, the overall height is 53-1/2". The product is made by Global Partitions with part numbers 40-8454500 and 40-8262370.
9A8454500 -
Matte Black Hadrian Between Wall Headrail Kit
The Matte Black Hadrian Between Wall Headrail Kit is designed for mounting Hadrian Matte Black Headrails. Constructed of stainless steel with matte black finish. Spring clip is made of plastic. This kits includes (2) Wall Brackets, (1) Spring Clip and fasterners. Would be used for partitions are run from one existing wall to another in a straight line. Spring clips would be used if you are needing to join two headrails together. Known as manufacturers part number 675414-BLK.
9H675414B -
Chrome Plated Two Ear Bracket For 3/4" x 1-1/2" x 2-1/2"L
If your toilet partition (bathroom stall) wall bracket is stamped 1620, then chances are you have the Two Ear Wall Bracket for 3/4″ thick toilet partition panels. This brackets base is 1-3/8″ wide x 3″ long with 2-7/32″ center to center hole spacing. The distance from the bottom of the base to the screw holes on the legs is 2-1/8″. The bracket is made of a die cast material that is then chrome plated. The bracket sometimes goes by the name Bathroom Stall (toilet partition) Two Ear Bracket or Wall Bracket
9A0162 -
Cast SS Two Ear Urinal Bracket 1" X 1-1/2" X 2-1/2"
Toilet Partition Two Ear Urinal Wall Bracket For 1" Panel Cast Stainless Steel
Cast stainless steel construction. Base is 1-1/2" x 4" with 3" centers on the mounting holes. The bracket legs project out 2-1/2" with the thru hole at 2-1/8" from the back of the base. Walls are 1/8" thick. Also know as a Bathroom Stall Partition Urinal Screen Bracket - Two Ear 1". Manufacture part # 1613.
Ships with mounting screws.
9A1613 -
Aluminum Bracket Two Ear For 1" Panel, 3" H X 2-3/4" L
Toilet Partition Bracket Two Ear For 1" Thick Panel Aluminum
Constructed of extruded anodized aluminum. Base is 3" high by 3-3/4" wide with the mounting holes 2-3/4" on center. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The 8 holes are 1/4" diameter. All wall thicknesses are 1/8". This bracket is sometimes known as a Bathroom Stall Two Ear Wall Bracket, or Toilet Partition Two Ear Wall Bracket. The manufacturers part number is 2264 and 650-1839. This bracket ships with all the needed fasteners.
9A2264 -
Stamped SS Continuous One Ear Bracket 1" x 2-1/2" X 54"
Toilet Partition Continuous One Ear Wall Bracket For 1" Panel x 54" Long Stamped Stainless Steel
18 gauge (.05" thick) stamped stainless steel construction. Base is 2-1/2" x 54" long. Mounting holes are 1-15/32" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 13" or so. Also known as a Bathroom Stall One Ear or One Wing Wall Bracket. Manufacturer part # 2879.
9A2879 -
Chrome Plated Bottom Hinge Assembly For 7/8" Door, 1-1/4" Pilaster
Toilet Partition Bottom Hinge Assembly For 7/8" Door, 1-1/4" Pilaster
Polished chrome plated zamac die cast construction. Kit includes Bottom Hinge, Pintle, Nylon Cam, and Bottom Hinge Door Insert. Bottom hinge measures 2-1/4" high by 1-1/4" wide with screw spacing of 1-1/2". Mounting lug projects out 1-1/4". Also known as a Bathroom Stall Bottom Hinge Kit. Manufacture part number 63010.
Screws are also included.
9A3010 -
Chrome Keeper Bumper Flat Stop 1-1/2" Outswing
Chrome Plated Toilet Partition Keeper Bumper Flat Stop 1-1/2" Between Screws, For Outswing
Polished chrome plated Zamac construction. The strike and keeper measure 2-1/2" high by 1-5/8" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. Also known as a Bathroom Stall Strike and Keeper Outswing Flat. Manufacture part # 5260
Shipped with mounting screws.
9A5260 -
Cast SS Keeper Bumper Inswing 1" Post Sq Edge
Partition Keeper Bumper Inswing 1" Post Square Edge Cast Stainless Steel
Cast stainless steel construction. Strike and Keeper measures 2-1/2" high by 1-15/16" wide. Stop is 17/32" thick and projects out 13/16". The screw holes are 1-1/2" on center. The slot is 5/16" deep by 1-1/2" high. This Bathroom Toilet Door Keeper is designed for use on 1" thick square edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing 1". Manufacture part # 5623.
Shipped with mounting screws.
9A5623 -
Pilaster Anchoring Device For 3/4" Thickness
Toilet Partition Pilaster Anchoring Device
Zinc plated steel construction. For 3/4" thick and larger Pilaster Posts and 3" wide and larger pilaster posts. The brackets are 11/16" wide. Also known as a Bathroom Stall Pilaster Post Anchoring Pack. All the screws are included in the package.
9A1056 -
Cast SS Door Pull Cast S.S. 2-3/4"
Partition Door Pull 2-3/4" Between Screws Cast Stainless Steel
Cast stainless steel construction. Door pull measures 4-1/16" wide by 13/16" projection with a 2-3/4" hole spacing. The holes are threaded for a 8-32 screw. Also known as a Bathroom Stall Door Pull. Manufacture part # 6203.
9A6203 -
S.S. Door Stop, Pilaster Mounted, 2-1/2" X 4-1/4"
Door Stop, Pilaster Mounted, 2-1/2" X 4-1/4", Stainless Steel.
Cast Stainless Steel construction. The door stop base is 3" wide by 1-1/4" high with a 2-5/16" hole spacing. The stop projects out 2-1/2" and has a rubber insert in it. This door stop is usually mounted on the pilaster or post. Also known as a Bathroom Stall Door Stop. Manufacture part # 4153.
9A4153 -
Full Length Door Stop for 1" Material
Full length aluminum door stop for 1" material used with solid plastic commercial toilet partitions or posts that are 1" thick. This product will help any gap from the front view of the toilet stall door on the latch side. For an out swing door the slide bolt latch locks onto the opposite side of the bumper. For an in swing door the kit comes with a simple stainless steel keeper that is mounted on the inside of the stall on the post for the latch to lock to. This kit is used for an inswing or an outswing door. The spec sheet is attached, the overall height is 53-1/2". The product is made by Global Partitions with part numbers 40-8464400 and 40-8262370.
9A8464400 -
Global Complete Hinge Set with Rounded Edge
Global Complete Hinge Set with Rounded Edge. Used currently with these factories Global, General and Flush Metal and Accurate Partitions. Complete as shown in picture with the parts. Includes top pin, top hinge, bottom cam, pintle and bottom hinge and security screws. Used with powder coated steel and stainless steel partitions with a slight round edge. These will not work with old original Accurate Partitions prior to 2013. Used 2013 to current with Accurate Partitions.
9G663140 -
Matte Black Hadrian Corner Headrail Kit
The Matte Black Hadrian Corner Headrail Kit is designed for mounting Hadrian Matte Black Headrails. Constructed of stainless steel with matte black finish. Sping clip and end cap are made of plastic. This kits includes (2) Wall Brackets, (1) Spring Clip, (1) L Bracket, (1) Headrail Endcap and fasterners. Would be used for partitions that need headrail across front of partitions as well as down one side. Spring clips would be used if you are needing to join two headrails together. L bracket is used to attach Headrail on the side of partitions to back wall. Known as manufacturers part number 675411-BLK.
9H675411B -
Chrome Plated Two Ear Bracket For 7/8" x 1-1/2" x 2-1/2"L
If your toilet partition (bathroom stall) wall bracket is stamped 1630, then chances are you have the Two Ear Wall Bracket for 7/8″ thick toilet partition panels. This brackets base is 1-3/8″ wide x 3-1/2″ long with 2-3/4″ center to center hole spacing. The distance from the bottom of the base to the screw holes on the legs is 2-1/8″. The bracket is made of a die cast material that is then chrome plated. The bracket sometimes goes by the name Bathroom Stall (toilet partition) Two Ear Bracket or Wall Bracket.
9A0163 -
Cast SS Two Ear Urinal Screen Bracket For 1" Panel 1-1/2" x 3-1/2
Toilet Partition Two Ear X- Long Urinal Wall Bracket For 1" Panel Cast Stainless Steel
Cast stainless steel construction. Base is 1-1/2" x 4" with 3" centers on the mounting holes. The bracket legs project out 3-1/2" with the thru hole at 3-1/8" from the back of the base. Walls are 1/8" thick. Also know as a Bathroom Stall Partition Urinal Screen Bracket - Two Ear Extra Long 1". Manufacture part # 1283.
Ships with mounting screws.
9A1283 -
Stamped SS Continuous One Ear Bracket 1" x 2-1/2" X 57"
Toilet Partition Continuous One Ear Wall Bracket For 1" Panel x 57" Long Stamped Stainless Steel
18 gauge (.05" thick) stamped stainless steel construction. Base is 2-1/2" x 57" long. Mounting holes are 1-15/32" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 13" or so. Also known as a Bathroom Stall One Ear or One Wing Wall Bracket. Manufacturer part # 2339.
9A2339 -
Aluminum Continuous "H" Bracket For 1" X 1" X 54",1" Panel To 1"
Toilet Partition Continuous "H" (Alcove) Bracket For 1" Thick Panels Aluminum
Constructed of extruded anodized aluminum. Channel is 2-1/2" high by 1+" wide by 54" long, for use with 1" panels. Thru holes are 1-1/2" on center. Holes are 1/4" diameter. Thru holes are every 13" or so. Sometimes known as Bathroom Stall Continuous Alcove Bracket or Toilet Partiton Alcove Bracket. The manufacturers part numbers are 2858, and 650-1862-54. These brackets are shipped with all the needed fasteners.
9A2858 -
Chrome Plated Keeper Bumper Inswing 1-1/4"
Chrome Plated Toilet Partition Keeper Bumper Inswing 1-1/4" Round Edge
Polished chrome plated Zamac die casting. The strike and keeper measures 1-7/8" wide by 2-1/2" tall by 1-1/2" deep. The stop measures 2-1/2" tall and projects out 3/4" and has a rubber insert. The two slots have a 1/4" opening by 13/16". Also known as a Bathroom Stall Strike and Keeper Inswing 1-1/4". Manufacture part # 5330
9A5330 -
Cast SS Keeper Bumper Inswing 1" Sq Edge
Partition Keeper Bumper Inswing 1" Square Edge Cast Stainless Steel
Cast stainless steel construction. The strike and keeper is 2-1/2" tall by 1-15/16" wide. The mounting holes are 1-1/2" on center. The stop is 2-1/2" tall by 13/16" projection with a rubber insert. The two slots are 5/16" deep by 13/16" high. Also known as Bathroom Stall Strike and Keeper Inswing 1". Manufacture part # 5823.
Shipped with mounting screws.
9A5823 -
Double Door Pull 5-1/2" Stainless Steel
The Partition Double Door Pull 5-1/2" stainless steel come as two handles for mounting back to back handles on an one inch thick door. The handles have 5-7/8" center to center hole spacing, and the screws included are for a 1" thick door. This is constructed of cast brushed stainless steel. The manufacturer part number on this part is 900112. Overall width is 6-3/4"
9HH002 -
Accurate Partitions EZ Shoe
ASI EZ Shoe is designed to anchor directely to the floor. Made for Global Partitions and Accurate Partitions restroom stall. This allows for the pilaster to sit inside the shoe. Constructed of #304 Stainless Steel and 3" height. The ASI EZ Shoe comes in round or square edge design. Round Edge shoes are configured for Solid Plastic (1" Thick), Powder Coated Steel and Stainless Steel (1-1/4" Thick) partition pilasters. Square Edge is designed for Plastic Laminate (1" Thick) and Phenolic (3/4" Thick) partition pilasters. ASI EZ Shoes come with all hardware for anchoring shoe to floor and screws for attaching pilaster shoe to pilaster. Pilaster shoes are the base support for partitions.
EZS -
Chrome Two Ear Bracket For 1" X 1-1/2" X 2-1/2"L
If your toilet partition (bathroom stall) wall bracket is stamped 1750, then chances are you have the Two Ear Wall Bracket for 1″ thick toilet partition panels. This brackets base is 1-3/8″ wide x 3-15-16″ long with 3″ center to center hole spacing. The distance from the bottom of the base to the screw holes on the legs is 2-1/8″. The bracket is made of a die cast material that is then chrome plated. The bracket sometimes goes by the name Bathroom Stall (toilet partition) Two Ear Bracket or Wall Bracket.
9A0175 -
Cast SS U Bracket 1" Panel, 1-1/2" X 1-3/8" L
Toilet Partition U Bracket For 1" Thick Panel Cast Stainless Steel
Cast stainless steel construction. Bracket base is 1-3/8" x 1-1/4" with two mounting screw holes. Bracket legs project out 1-3/8" with the thru hole at 1" on center from the bottom of the base. Also known as a Bathroom Partition Stall U-Bracket or Wall Bracket 1". Manufacture part number 1913
Shipped with mounting screws
/p>9A1913 -
Stamped SS Continuous One Ear Bracket 1-1/4 x 2-1/2 x 57
Toilet Partition Continuous One Ear Wall Bracket For 1-1/4" Panel x 57" Long Stamped Stainless Steel
18 gauge (.05" thick) stamped stainless steel construction. Base is 2-11/16" x 57" long. Mounting holes are 1-19/32" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 14" or so. Also known as a Bathroom Stall One Ear or One Wing Wall Bracket. Manufacturer part # 2359.
9A2359 -
Aluminum Continuous 'L' Bracket 2-3/4" X 57-1/2"
Toilet Partition Continuous 'L' Wall Bracket 2-3/4" X 57-1/2" Aluminum
Extruded aluminum construction. Base is 1-3/8" and the leg projects out 2-3/4". These are sold individually. It is also known as a Bathroom Stall Continuous L Wall Bracket. The manufacturers part # is 2684.
9A2684
