Von Duprin 210K Knob Trim
3" x 4-25/32" x 3/32"220K-As low as $277.58
Von Duprin 210NL Trim
5-3/8" x 4-25/32" x 3/32"
1-31-32" projection220NLAs low as $57.81
The Von Duprin 22, 33, 33A, 98 and 99 dogging shaft is the current dogging shaft. And has been in production since 1998. If your device is from before 1998, then you would use the 050709. This is the piece that the dogging key would fit into. The shaft is for a 5/32" dog key. #4 on diagram
Von Duprin Part # 090040G090040$9.75
The Von Duprin Dogging Adaptor is the female part that holds the dogging shaft in place.
Von Duprin dogging assebly part
#1 on diagram
Von Duprin part # 090043
Von Dupin 22 Plastic Cap Only
This is the end cap that goes on the hinge side of the door. When the cap breaks off the Dogging Cover Plate just slides off. Works on all of the Von Duprin 22 exit devices. If you need the bracket also, please order part # G22R10. Black plastic contruction. As of October 1, 2014, Von Duprin no longer sells just the Plastic Cap Only. The complete End Cap and Bracket 900981 will be shipped in its place.
Von Durpin Part # 968601G22R25
Von Duprin 2227 Bottom latch.
Replaces and updates all 2227 bottom latches to the new style if you device was shipped before October 1998. If your device was shipped after October 1998 then use the G050401.
Includes screws and bracket
Von Duprin Part # 050090G22VR120
Von Duprin 2227 Latch Cover.
Package includes mounting screws
Von Duprin part # 050566G22VR30-As low as $64.62
Von Duprin 2227 Rod Guide
Works on all of the Von Duprin 2227's, and replaces the older style that featured the plastic cap and the springs.
Von Durpin part # 112063G22VR80-As low as $61.36
Von Duprin 2227 Center Case
Replaces worn out Von Durpin 2227 Center Cases. The Von Duprin 2227 is the 22 Series Device that has the Surface Vertical Rods.
Von Duprin Part # 109358G22VR90$228.21
Von Duprin NL Drive Screw 090074
The 090074 NL Drive Screw is used on the Von Duprin 22, 98 and 99 Exit Devices to control the rotation of the key cylinder cam. This small set screw, screws into the back of the chassis assembly next to the receptor for the Rim Key Cylinder. The set screw measures 5/16" long by 3/16" diameter. Note: When the NL drive screw is left in back of device, the outside cylinder will function only as a Night Latch. The Night Latch function means the door can only be opened, but not dogged open with the key cylinder.
Von Duprin Part # 090074
Old Von Duprin Part # 970441G090074$2.78
Von Duprin Alarm Kit-ALK
The Von Duprin Alarm Kit converts the Von Duprin 22, 33A, 35A, 98 and 99 Devices to an alarmed exit device. When you exit the alarm will sound. Powered by a standard 9 volt battery and is controlled by a Mortise Cylinder, not included.
Von Duprin Part # 22-ALK, 33A-ALK, 35A-ALK, 98-ALK AND 99-ALKALKAs low as $594.23
The Von Duprin Old Style Dogging Shaft was used on devices manufactured before July 1997. The Shaft measures roughly 1-1/2" long with a 1/2" diameter. The hex is 5/32".
Von Duprin Part # 968112G968112$16.53
The Von Duprin 900850 Latch Cover Screw Package is used on the 22, 33, 35, 98 and 99 Series surface vertical rod latch covers. The are sold in packages of 2 screws.88VR40-As low as $15.78
Von Duprin 230TP Thumb Pc Trim
3" x 12-1/16" x 3/32"22TP-As low as $234.45
Von Duprin 230NL Trim
3" x 12-1/16" x 3/32"22NLAs low as $128.97
Von Duprin 22 Replacement End Cap and Bracket.
The bracket is constructed of zinc plated steel and the end cap is black plastic. Bracket also acts as mounting bracket that holds the exit device on the door.
Von Duprin part # 900981G22R10
Von Duprin 2227 Top latch
This latch is used on devices shipped before October 1998, see related products for the new style latch if your device is newer. This is usually the problem if your bottom rod is dragging on the floor. Includes screws.
Von Duprin Part # 050091G22VR10
Von Duprin 22 / 2227 Push Bar End Cap
Cap fits on the ends of the Von Duprin 22 Series Push Bar.
Von Duprin Part # 968598G22R20$12.18
The Von Duprin 900581 Cylinder Cup and Tail Piece Assembly is used on just about everyone of their devices outside tirm.G900581$16.00
Von Duprin Exit Device 22 Rim Center Case Cover
Replace your old or missing Von Duprin 22 Cover. This cover comes in aluminum or dark brown finishes.
Von Duprin part # 968603 SP28 or SP313G22R30As low as $59.97
Von Duprin Exit Device 22 Center Case 109012
Von Duprin 22 Center Case. Replaces worn and broken Von Duprin 22 Center Cases
Von Duprin Part # 109012G22R40$257.00
Von Duprin 22 Control Link Pin
The control link pin is the connector pin, that connects the latch head assembly to the push bar assembly. When the push bar is pushed in it retracts the latch bolt and the pin connects the two pieces. This Control Link Pin is used on the Von Duprin 22, 33A, 98 and 99 Panic Devices.
VON DUPRIN PART # 050529
Old Von Duprin Part # 969520G22R60$15.07
Von Duprin 22 Dogging Cover Plate. Plate covers the dogging assy, or hinge side of the exit device. This plate sides off when the plastic end cap breaks or goes missing.
Von Duprin Part # 968595G22R90-As low as $61.36
Von Duprin 2227 Center Case Cover
The Von Duprin 2227 Center Case Cover comes in an Aluminum color or Dark Brown color.
Von Duprin Part # 968888G22VR100-As low as $66.61
Von Duprin 2227 Bottom Vertical Rod
The length of the bottom vertical rod is set at the factory. All the bottom rods are the same length because of ADA standards. The top rods are field adjustable.
Von Duprin part # 109362G22VR110-As low as $123.77
Von Duprin Tail Piece Guide Lead Kit Package Of 10 - 050156
Used to guide rim cylinder tail piece into the back of the Von Duprin 22, 33A, 98, and 99 exit devices
Slot is 5/16" x 3/16" x 1" long
Von Duprin Part # 050156G050156$21.11
The Von Duprin Latch Mounting Bracket 050546 is used on the 2227, 3327 and 9927. It is for use with the 050400, 050401, 050091 and 050090 Surface Vertical Latches.
Von Duprin Part # 050546
Old Von Duprin Part # 971567G050546$34.09
Von Duprin 210DT Trim
5-3/8" x 4-25/32" x 3/32"
1-31-32" projection220DTAs low as $52.59
Von Duprin 22 Exit Device Only
Von Duprin 22 rim exit device for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3, 2001, Grade 1. Covers stock hollow metal doors with 161* cutouts. Fits door stiles as narrow as 3 13/16"
Ships with all mounting screws and the 299 strike.22EOAs low as $391.01
Von Duprin 230L Trim
3" x 6-3/8" x 15/16"
Cylinder Not Included22LAs low as $264.56
Von Duprin Exit Device Dogging Spring
Von Duprin dogging assembly part 090041
#3 on diagram
Von Duprin part #090041
Von Duprin Exit Device Lever Trim Shear Pin Kit
This is the component that is designed to break, if the lever handle is forced to open , this pin snaps so your trim is not destroyed. 3/16" diameter shaft by 5/8" overall length. Retaining Ring included. This shear pin is used on the 230L, 360L, 992L, 994L and 996L Von Duprin Lever Trims.
Von Duprin Part # 050611 Old Part # 971583G050611$14.04
Von Duprin 230L Tailpiece Auxiliary Kit
The Von Duprin 230L Tailpiece Auxiliary Kit includes the Tailpiece, Tailpiece Guide, and the Pine Tree Clip.
Von Duprin Part # 900894G900894$21.11
The Von Duprin 22 Mechanism Metal End Cap 900397 is new for 2016. This new kit replaces the 900397 with a metal end cap, which is has always been a weak link of the 22 series. The package includes the End Cap, Bracket and the Mounting Screws. This cap and bracket will work on all of the 22 and 2227 series.
Von Duprin part # 900397G22R10M-As low as $36.07
Von Duprin 2227 Exit Device Only
Von Duprin 2227 surface mounted vertical rod exit device for all types of single and double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3, 2001, Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. Fits door stiles as narrow as 3-5/8". For doors as high as 7'1", if your door is higher than 7'1", please call.
Ships with all mounting screws and the 299, 304L and 248L-4 Strike
Von Duprin Part # 2227EO2227EO-As low as $696.94
Von Duprin 230DT Trim
3" x 12-1/16" x 3/32"22DTAs low as $123.35