The Von Duprin 99 rim exit devices for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The Von Duprin 98 device has a smooth mechanism case and the Von Duprin 99 device has a grooved case. The rim device is non-handed.
Ships with all the mounting screws and the 299 Strike.99EOAs low as $1,224.95
The Von Duprin 22, 33, 33A, 98 and 99 dogging shaft is the current dogging shaft. And has been in production since 1998. If your device is from before 1998, then you would use the 050709. This is the piece that the dogging key would fit into. The shaft is for a 5/32" dog key. #4 on diagram
Von Duprin Part # 090040G090040$9.75
The Von Duprin Dogging Adaptor is the female part that holds the dogging shaft in place.
Von Duprin dogging assebly part
#1 on diagram
Von Duprin part # 090043
Von Duprin 9927 Latch Covers.
This cover is used on the 2227, 3327A, 3427A, 9827 and 9927 Exit Devices. Replace old bent and worn covers with brand new ones.
Includes mounting screws
Von Duprin Part # 050566
Other finishes are availableG99VR20-As low as $64.62
Von Duprin Push Bar Guide 090049
Fits on the end of the push bar assembly, reduces noise and friction. Used on the Von Duprin 33A, and 99 / 98's
Von Duprin Part # 090049
Old Von Duprin Part # 971993G090049$17.86
Von Duprin 22, 33, and 9927 Top latch
This latch is used on the 2227, 3327A, and 9927 Surface Vertical Rod Devices. This latch is for use on devices shipped after October 1998. This is usually the problem if your bottom rod is dragging on the floor. Includes screws. The mounting bracket is sometimes included, and sometimes they are not. Call us and we will check.
Von Duprin Part # 050400G050400
Von Duprin Exit Devices 608/880/990TP Thumb Piece
Replace thumb piece only, rivet not included. Cast bronze construction, and then plated to the selected finish. 5-1/8" overall length, but note that the length is usually cut down in the field depending on the thickness of your door.
Von Duprin Part # 970488
Old Part # 960303G970488-As low as $79.54
Von Duprin NL Drive Screw 090074
The 090074 NL Drive Screw is used on the Von Duprin 22, 98 and 99 Exit Devices to control the rotation of the key cylinder cam. This small set screw, screws into the back of the chassis assembly next to the receptor for the Rim Key Cylinder. The set screw measures 5/16" long by 3/16" diameter. Note: When the NL drive screw is left in back of device, the outside cylinder will function only as a Night Latch. The Night Latch function means the door can only be opened, but not dogged open with the key cylinder.
Von Duprin Part # 090074
Old Von Duprin Part # 970441G090074$2.78
Von Duprin Exit Device 47 Bottom Latch Kit 050493
This Von Duprin Concealed Bottom Latch is used on the 33A, 35A, 98 and 99 exit devices.
Von Duprin Part # 050493
Von Duprin Old Part # 106780G050495$387.09
Von Duprin Exit Device 994/996 Hex Stud
This is the Hex Stud used on the Von Duprin 994/996 Lever Trim. The threads are 1/4-20 on the male side. Overall lenght is 2"
Von Duprin Part # 971585G971585$15.00
Von Duprin E996 Solenoid Kit 050814 is discontinued, but the E996 Locking Mechanism 050671 is still available and it contains the 050814 Solenoid.
This solenoid is used on the E996 Electrified Lever Trim. The Solenoid body measures 1-3/8” x 9/16” diameter, mounting bracket has a 3/4” on center hole spacing. The wiring harness has a two wire plug. We some times fine the number 991342 on the solenoid.
Von Duprin Part # 050814
Von Duprin Part # 050671G050814$465.23
Von Duprin 98/9947 Adjustable Bottom Rod
This rod is used on the 9847, 9847-F, 9947 and 9947-F
Von Dupin Part # 050575
Old Part #112342G050575$94.14
Von Duprin Alarm Kit-ALK
The Von Duprin Alarm Kit converts the Von Duprin 22, 33A, 35A, 98 and 99 Devices to an alarmed exit device. When you exit the alarm will sound. Powered by a standard 9 volt battery and is controlled by a Mortise Cylinder, not included.
Von Duprin Part # 22-ALK, 33A-ALK, 35A-ALK, 98-ALK AND 99-ALKALKAs low as $594.23
The Von Duprin Old Style Dogging Shaft was used on devices manufactured before July 1997. The Shaft measures roughly 1-1/2" long with a 1/2" diameter. The hex is 5/32".
Von Duprin Part # 968112G968112$16.53
The Von Duprin 900850 Latch Cover Screw Package is used on the 22, 33, 35, 98 and 99 Series surface vertical rod latch covers. The are sold in packages of 2 screws.88VR40-As low as $15.78
The Von Duprin 990DT Trim is the standard Dummy Trim for the 99 and 98 Series devices. The plate is constructed of Bronze or Stainless Steel and then plated to the desired finish. The plate measures 3" wide by 14-3/16" tall, and includes the mounting screws. The stanchions coming off the back of the plate line up with the center case mounting screws.
Von Duprin Part # 990DT-R&V99DT-As low as $279.17
The Von Duprin 996L Lever Trim replaces the 992L, and 994L and is the latest generation of the 99 Lever Trim.
The escutcheon plate measures 2-3/4" wide by 10-3/4" high and projects out 27/32". The handle projection is 2-7/8". This lever handle is handed, but is field reversible. Key lock and unlocks lever.ver.99LAs low as $537.96
Von Duprin 880/990 Trim Hex Stud
This is the Hex Stud used on the 880 and 990 Trim Plates. The threads are 7/32-24. Overall lenght is 2"
Von Duprin Part # 956760G956760$11.13
Von Duprin 99 Mechanism End Cap, also known as 98/99 Impact Resistant End Cap Kit.
Replaces all of the old versions of the 98/99 End Caps, the mounting holes may be different.
Includes end cap, bracket and all screws
Von Duprin Part # 050014G99R10-As low as $84.09
The Von Duprin 99 Rim Center Case Cover replaces your old 1 or 3 piece cover.
The Von Duprin Cover comes with mounting screws.
Von Duprin part # 050071G99R20-As low as $148.78
The Von Duprin 33A, 35A, 98 and 99 Cover Plate
Covers the dogging assembly on the hinge side of the door. The usually fall off when the End Cap is not on the exit device.
Von Duprin Part # 050114 and 050117 Hex Key Dog Conversion KitG99R50As low as $79.54
Von Duprin 33/35/98/99 push bar stock absorbers. This is the piece that makes these Von Duprin exit devices one of the quietest devices made.
Von Duprin Part # 050491G99RABS$39.07
Von Duprin 9927 Bottom Vertical Rod
Ends are included
Von Duprin part # 110574G99VR50-As low as $91.67
Von Duprin 9927 Center Cover ScrewsG99VR65-As low as $18.90
Von Duprin Exit Device 47 Top Latch Kit 050492
This Von Duprin Concealed Top Latch is used on the 33A, 35A, 98 and 99 exit devices. The Latch Kit includes Latch, Mounting Brackets and all screws.
Von Duprin Part # 050492
Von Duprin Old Part # 109759G050492$320.76
Von Duprin 33/3547 99/9947 Ratchet Lever Spring (2)
One of two springs located in the 33/3547 and 98/9947 Top Latch 050492. Sold in packages of 2.
Von Duprin Part # 090069G090069$13.86
Von Duprin 98/9975 Center Case Kit
The Von Duprin 98/9975 Center Case Kit is used on the 9875 and 9975, Panic and Fire Rated Hardware.
Von Duprin Part # 050023G050023$160.03
The Von Duprin 99 Cover Mounting Bracket is used on the 98 and 99 Series Covers.
Part # 050564
Old Part # 969864G050564$21.00
The Von Duprin QEL Baseplate Conversion Kit is for use on the 33A, 35A, 98, and 99 exit devices.
Von Duprin Part # 958003 3' Device
Von Durpin Part # 040065 4' DeviceG95800xAs low as $967.00
The Von Duprin 900581 Cylinder Cup and Tail Piece Assembly is used on just about everyone of their devices outside tirm.G900581$16.00
The Von Duprin 990TP Trim is the standard Thumb Piece Trim for the 99 and 98 Series devices. The plate is constructed of Bronze or Stainless Steel and then plated to the desired finish. The plate measures 3" wide by 14-3/16" tall, and includes the mounting screws. The stanchions coming off the back of the plate line up with the center case mounting screws. The key cylinder locks and unlocks the thumb piece. The Rim Cylinder shown in the picture is not included.
Von Duprin Part # 990TP-R&V
Cylinder not included.99TPAs low as $432.98
Von Duprin 98/99 Rim Center Case
Replaces all previous versions of the Von Duprin 98/99 Rim Device Center Cases. All internal parts, springs, screws and cover mounting bracket included.
Von Duprin Part # 050020G99R15$419.29
Von Duprin 9927 Latch Cover ScrewsG99VR25-As low as $17.50
Von Duprin 9927 Bottom latch
Replaces and updates all 9827 and 9927 bottom latches to the new style, if your device was installed before October 1998. If your device is newer then October 1998, then use the G050401. Mounting screws are included.
Includes screws and bracket
Von Duprin Part # 050090G99VR55
Von Duprin 050538 EL Dogging Rod Retainer
This fitting threads into the 050536 HD Solenoid and connects to the Dogging Rod
#5 On DiagramG050538$16.08
Von Duprin 99 Push Bar Retrofit Kit-Pbkit
Von Duprin's 98/99 Push Bar Retrofit Kit updates your current version touch pad, to the newest version. Used on all the Von Durpin 33A, 35A, 99 and 98's.
Von Duprin part # PBKIT
For doors 30" to 36" order the 36" size. If your door is 36" to 48" order the 48" sizeG99R35As low as $235.34