Chairs
Chair Glides / Chair Tips / Chair Feet
Selling replacement Chair Glides / Tips / Feet for the past 40 years. Chair Glides for classroom chairs and tables, Non-Swivel Chair Glides, Swivel Chair Glides, Threaded Stem Chair Glides, for Round and Square Legs.
Robert Brooke and Associates Chair Glide Catalogue
Make sure you click on the Chair Glide / Chair Tip /Chair Feet Image or Text for more dimensional and pricing information.
-
Plate Top Single Wheel Caster - Non Swivel - 4" Wheel
Plate Top Single Wheel Caster - Non Swivel (Rigid)- 4" Wheel, 1-3/4" x 3" Hole Spacing. Zinc finish with black rubber wheel. Available with a tread for carpet and a tread for non carpet areas.
KKAC51 hard tread for carpet
KKAC52 soft tread for non carpet surface
KKAC5x -
Friction Ring Single Wheel Caster - 3" Wheel - 7/16" Stem Diameter
Friction Ring Single Wheel Caster - 3" Wheel - 7/16" Stem Diameter, 1 3/8" stem length, 3" wheel diameter. Zinch finish with black rubber wheel. Available with tread for both carpet and non carpet floors.
KK5841 hard tread for carpet
KK5842 soft tread for non carpet
KK584x -
Smooth Bottom Glide Cap Protective Chair Tip
Smooth Bottom Glide Cap Protective Chair Tip
This Glide Cap has a smooth bottom to prevent your chairs from scratching your floors, while at the same time extending the life of your current glides. This cap will fit on all of our Metal and Nylon Based Swivel Glides.
This Glide Cap is designed for use with our SGR Glides, or Swivel Glides Round 1-1/4" bases.
KGCC3 -
Reinforced Rubber Crutch Tips 3/4 inch
Reinforced Rubber Crutch Tips For 3/4" Outside Diameter Round Chair Legs. Help protect your floors from damage. This application is for when your metal chair leg punches through your Rubber Chair tip. Using the Tube Cap on the chair leg first, then apply the Rubber Crutch Tip over the leg will solve that problem by providing more of a surface area to displace the weight. Available in black or white and a variety of sizes.
Part # - Color
CRT75BTC - Black
CRT75WTC - TanCRT75XTC -
5/8" Q-Ball Floor Protector
The 5/8" Q-Ball Floor Protector is for use on 5/8" outside diameter chair and table legs. The adaptor shown on the right fits over your existing glide, and then the Q-Ball slides over the adaptor. Constructed of Gray Plastic.
CGQ62 -
1-1/8" Q-Ball Floor Protector
The 1-1/8" Q-Ball Floor Protector is for use on 1-1/8" outside diameter chair and table legs. The adaptor shown on the right fits over your existing glide, and then the Q-Ball slides over the adaptor. Constructed of Gray Plastic.
CGQ112 -
3/4 inch Tube Cap
3/4" Tube Cap
Round Tubing - 6 prong Tube Caps are pushed in easily and hold securely in 16 or 18 gauge round tubing. Sold individually.
Fits 3/4" outside diamter legs, 3/4" base diamter
Nickel Base Finish
TC75 -
3 Prong 5/8 inch Slide For Wood Furniture
3 Prong 5/8" Slide For Wood Furniture
5/8" base diameter. Metal base slide for wood furniture. You should use a diameter that aproximately half the diameter of furniture leg.
SG62 -
3 Prong 7/8 inch Slide For Wood Furniture
3 Prong 7/8" Slide For Wood Furniture
7/8" base diameter. Metal base slide for wood furniture. You should use a diameter that aproximately half the diameter of furniture leg.
SG87 -
1-1/16 inch Nail On Glide-Nickel Base
1-1/16" Nail On Glide-Nickel Base
Nail on furniture glide, 1-1/16" diameter nickel plated metal base
NG106 -
1-1/4 inch Nail On Glide-Nickel Base
1-1/4" Nail On Glide-Nickel Base
Nail on furniture glide, 1-1/4" diameter nickel plated metal base
NG125 -
1-1/8 inch Nail On Glide W/Nylon Base
Metal based glide that nails into wooden furniture, 1 1/8" diameter base glide. .
NG12P -
Safeglides-Brown 7/8 inch Base Diameter Nail On Glide
Safeglides-Brown 7/8" Base Diameter Nail On Glide for furniture. To install the glide, tap it into your wooden furniture.NG2015 -
7/8 inch Nail On Glide Felt Bottom
Protect your floors from scratches with the 7/8" Nail On Glide Felt Bottom. Simply nail into your furniture to keep the legs from ruining the floor.NG87F -
Plastic Chair Tips Round Tubing 3/4 inch O.D. X 11/16 inch I.D.
Round Black Plastic Chair Tips for Round Tubing chair legs with a 3/4" Outside Diameter X 11/16" Inside Diameter. Available in black only.
PR75B -
Plastic Chair Tip Round Tubing 1-1/4 inch O.D. X 1-1/8 inch I.D.
Round Black Plastic Chair Tips Round Tubing For 1-1/4" Outside Diameter X 1-1/8" Inside Diameter Chair Legs.
PR125 -
Felt Pads 3/4" Diameter
Felt Pads 3/4" Diameter for a Chair Leg to prevent scratching and reduce noise. Self adhesive so it installs in seconds. 3/16" thick.
KGP75 -
Lyon Folding Rubber Chair Tip-Front
Replacement Lyon Folding Chair Front Legs. Lyon Folding Rubber Chair Tip for the Front Legs. The base is 1 1/4" x 13/16", insert measurements are 3/8" x 3/4". This tip is lyon part number 1592.
KGL1 -
5/16-18 Swivel Glide Nylon Base
Leveler Glide with a Nylon Swivel Base. Glide is 5/16-18 thread, with a 1 3/4" base diameter and 1 1/2" stem length. Stop wobbling of uneven floors with this Metal Furniture Foot. Screw into a thread leg hole to reach your desired height. Combine with a tnut to install in wooden furniture legs.
SLA17531P -
Non Swivel Glide 5/8 inch O.D. X 7/16 inch I.D. Nickel Base
Non swivel glides for round tubing
5/8" outside diameter
7/16", 1/2" and 9/16 inside diameter
1-1/16" base diameter
Nickel plated metal baseNSR62 -
Non Swivel Glide 1 inch O.D. X 7/8 inch I.D. Nickel Base
Non swivel glides for round tubing
1" outside diameter
7/8" inside diameter
1-1/16" base diameter
Nickel plated metal baseNSR100 -
Swivel Glide 3/4 inch O.D. X 9/16 inch I.D. With Ferrule
Metal Swivel Glide with 3/4" chair leg O.D. X 9/16" I.D. chair leg With Ferrule. American Seating and Griggs Metal Base Swivel glide with internal holding clip. Base is 1 1/4" in diameter. Metal base glides are very popular in schools and institutions and move easily across smooth or carpeted floors. Metal base glides are nickel plated and are extremely durable, but when they do wear out, they will scratch the floor. The glide freely swivels beyond 30 degree angle. Glide grips leg with outside holding clip, meaning it grabs the outside of the leg, see more views for picture of outside holding clip.
SGR75E -
Irwin Glide With Metal Cap
Irwin Glide With Metal Cap
for 1/2" outside diameter tubing
product includes metal base and nickel plated tubing collar
KG1500