Von Duprin Exit Devices

View as Grid List

Items 1-36 of 148

per page
Set Descending Direction
Page
  1. Von Duprin Strike 264

    Von Duprin Strike 264

    This strike measures 2-7/8" tall by 1-1/4" wide with a roller projection of 9/16". Used on the Von Duprin 22, 88, 98 and 99 when a lower profile strike is need in place of the Von Duprin 299 Strike. The hole spacing is 2-1/8" on center, and it ships with mounting screws and a shim. Also known as a Von Duprin Surface Roller Strike.

    264
    $87.67
  2. Von Duprin Strike 1609

    Von Duprin Strike 1609

    This strike is used when we have a double door application without a center post. By using this strike we can have one door with a surface vertical rod and one door a rim device, which will save money because vertical rods are usually expensive. This strike can be used with the Von Duprin 22/2227, 88/8827, 98/9827 and 99/9927 combinations, but not with the Fire Rated Versions. The strike base measures 1-1/16" wide by 3-1/4" high, the lip projects out 7/8". The three slots are 1-1/4" on center. This strike ships with the mounting screws.

    US19-Black finish

    1609
    $87.67
  3. Von Duprin Strike 299

    Von Duprin Rim Strike 299

    The Von Duprin 299 Strike is used on the 22, 88, 98, and 99 Rim Devices and also as a Top Strike on the 2227, 8827, 9927, and 9827 Surface Vertical Rod Panic Devices. The 299 strike measures 1-1/4" wide by 2-7/8" high with a slotted hole spacing of 2-1/8". The roller projects out 13/16".

    Ships with shim and mounting screws

    299
    $55.39
  4. Von Duprin Strike 299F

    Von Duprin Strike 299F

    The Von Duprin 299F Strike is used on the 22, 88, 98, and 99 Fire Rated Rim Devices (no hex or cylinder dogging). The 299F strike measures 1-1/4" wide by 2-7/8" high with a slotted hole spacing of 2-1/8". The roller projects out 13/16". The non fire rated version would be the Von Duprin Strike 299.

    Ships with shim and mounting screws

    299F
    $68.88
  5. Von Duprin Strike 304L

    Von Duprin Strike 304L

    This Von Duprin Strike is used for the bottom latch of the 2227, 8827, 9827 and 9927. The strike measures 1-7/8" by 1-7/8" outside dimension of the square flange, with an inside dimension of 1-1/8" by 1-1/8". The part that is inserted into the floor is 1-3/8" x 1-3/8" and drops down 13/16". Also known as a Von Duprin Floor Mounted Mortise Strike.

    304L
    $47.59
  6. Von Duprin Strike 248L-4

    Von Duprin Strike 248L-4

    The Von Duprin 248L-4 Strike is used as a Top Strike on the 2227, 8827, 9927, and 9827 Surface Vertical Rod Panic Devices. The 248L-4 strike measures 9/16" wide by 2-1/2" high with a hole spacing of 1-7/8. The strike projects out 3/8".

    Ships with shim and mounting screws

    Von Duprin Strike 248L-4

    Burnished steel construction

    248L-4
    $52.60
  7. Von Duprin 6000 Series Solenoid Kit

    Von Duprin 6000 Series Solenoid Kit

    Part # 050237 12 VDC (Fail Safe & Fail Secure)
    Part # 050239 16 VDC (Fail Safe & Fail Secure)
    Part # 050240 24 VDC (Fail Safe & Fail Secure)

    G0502xx
    As low as $109.95
  8. Von Duprin Strike 1409

    Von Duprin Strike 1409

    This Von Duprin Strike is used for the bottom latch of the 22, 33, 33A, 55, 88 and 99 Rim Devices.  Also known as a Blade Stop.

    1409
    $125.24
  9. Von Duprin Strike 499F

    Von Duprin Strike 499F

    The Von Duprin 499F is used on the 22, 98 and 99 Series Fire Rated Rim Devices when used with the 9954 Mullion.

    499F
    $160.03
  10. Von Duprin 55NL Cam

    The Von Duprin 55NL Cam is one of the handed parts in the housing, the other is the Arm.  If you need to change the hand of a housing, you just need to order the other hand Cam.

    The Cam shown in the Picture is Right Hand

    Von Duprin Part #'s 050355-Right Hand, 050356-Left Hand.

    G050355-6
    As low as $39.60
  11. Von Duprin Latch Mounting Bracket 050546

    The Von Duprin Latch Mounting Bracket 050546 is used on the 2227, 3327 and 9927.   It is for use with the 050400, 050401, 050091 and 050090 Surface Vertical Latches.

    Von Duprin Part # 050546
    Old Von Duprin Part # 971567

    G050546
    $29.23
  12. Von Duprin 110388 EL Cable Assembly

    The Von Duprin 110388 EL Cable Assembly connects directly into your power source and the Potted Circuit Breaker 050534. This 6 foot Cable Assembly is used on Von Duprin and Falcon Exit Devices that have the Electric Latch Retraction.

    Von Duprin Part # 110388-00

    G110388
    $40.48
  13. Von Duprin 2227 Exit Device Only

    Von Duprin 2227 Exit Device Only

    Von Duprin 2227 surface mounted vertical rod exit device for all types of single and double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3, 2001, Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. Fits door stiles as narrow as 3-5/8". For doors as high as 7'1", if your door is higher than 7'1", please call.

    Ships with all mounting screws and the 299, 304L and 248L-4 Strike

    Von Duprin Part # 2227EO

    2227EO-
    As low as $664.99
  14. Von Duprin 22 Exit Device Only

    Von Duprin 22 Exit Device Only

    Von Duprin 22 rim exit device for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3, 2001, Grade 1. Covers stock hollow metal doors with 161* cutouts. Fits door stiles as narrow as 3 13/16"

    Ships with all mounting screws and the 299 strike.

    22EO
    As low as $391.01
  15. Von Duprin 33A Exit Device Only

    Von Duprin 33A Exit Device Only

    33A and 35A for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 35A has a smooth mechanism case and the 33A has grooved case. 33A/35A fits door stiles as narrow as 1 3/4". Newly designed device has a one piece center case cover.

    Plated Door Finishes

    33AEO
    As low as $1,281.16
  16. Von Duprin 3327A Exit Device Only

    Von Duprin 3327A Exit Device Only

    3327A and 3527A for all types of single and double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The 3527A has a smooth mechanism case and the 3327A has grooved case. 3327A/3527A fits door stiles as narrow as 1-3/4". Newly designed device has a one piece center case cover.

    3327AEO
    $1,872.61
  17. Von Duprin 386DT Dummy Trim

    Von Duprin 386DT Dummy Trim

    This Von Duprin 386DT Dummy Trim is just a pull handle. The bolt pattern of the trim plate lines up with the Von Durpin 33A on the inside so they are on conhesive unit. The base plate measures 7-15/16" by 1-5/8". The grip measures 8-1/2" by 4-5/16" with a 2-7/16" projection. This 386DT Dummy Trim is non handed.

    386DT
    $245.18
  18. Von Duprin 386NL Dummy Trim

    Von Duprin 386NL Dummy Trim

    This Von Duprin 386NL Night Latch Trim is just a pull handle. The bolt pattern of the trim plate lines up with the Von Durpin 33A on the inside so they are on conhesive unit. The base plate measures 7-15/16" by 1-5/8". The grip measures 8-1/2" by 4-5/16" with a 2-7/16" projection. This 386NL Night Latch Trim is handed. Uses a standard Rim Cylinder.

    386NL
    $510.69
  19. Von Duprin 360L Lever Trim

    Von Duprin 360L Lever Trim

    The Von Durpin 360L Lever Trim has a base measurement of 7-1/2" high by 1-11/16" wide and 7/8" thick. The lever is 4-1/2" and projects out 3". This lever Trim uses a 1-1/4" Mortise Straight Cam Cylinder.

    Von Duprin Part # 360L

    33L
    $555.21
  20. Von Duprin 9927 Exit Device

    Von Duprin 9827/9927 surface mounted vertical rod device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Covers stock hollow metal doors with 86 or 161 cutouts. The Von Duprin 9827 device has a smooth mechanism case and the Von Duprin 9927 device has a grooved case. The surface vertical rod device is non-handed.

    9927EO-
    As low as $1,692.59
  21. Von Duprin 9975 Exit Only

    Von Duprin 9875/9975 mortise lock device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Fits stock hollow metal doors with 86 cutout and door stiles as narrow as 4-3/4" (121mm). The Von Duprin 9875 device has a smooth mechanism case and the Von Duprin 9975 device has a grooved case. The mortise lock device is non-handed

    9975EO
    As low as $2,216.07
  22. Von Duprin 99 Exit Device Only

    The Von Duprin 99 rim exit devices for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The Von Duprin 98 device has a smooth mechanism case and the Von Duprin 99 device has a grooved case. The rim device is non-handed.

    Ships with all the mounting screws and the 299 Strike.

    99EO
    As low as $1,134.21
  23. Von Duprin EL99 Exit Device Only

    This is the same trusted Von Duprin 99 with Electric Latch Retraction, also known as EL.

    The EL feature allows for the remote unlatching of exit devices. A control station operator can flip a switch to retract the latch bolt and immediately change an exit door to push-pull operation. A powerful, continuous duty solenoid retracts the latch bolt, either for momentary unlatching, or for extended periods of time. The EL feature is an alternative to manual dogging.

    The rim device is non-handed.
    A power supply is required for operation, see related products.
    Ships with all the mounting screws and the 299 Strike.

    EL99EO-
    As low as $1,978.66
  24. Von Duprin 990DT Trim

    The Von Duprin 990DT Trim is the standard Dummy Trim for the 99 and 98 Series devices.  The plate is constructed of Bronze or Stainless Steel and then plated to the desired finish.  The plate measures 3" wide by 14-3/16" tall, and includes the mounting screws.  The stanchions coming off the back of the plate line up with the center case mounting screws.

    Von Duprin Part # 990DT-R&V

    99DT-
    As low as $239.34
  25. Von Duprin Exit Device 99 Lever Trim

    The Von Duprin 996L Lever Trim replaces the 992L, and 994L and is the latest generation of the 99 Lever Trim.

    The escutcheon plate measures 2-3/4" wide by 10-3/4" high and projects out 27/32". The handle projection is 2-7/8". This lever handle is handed, but is field reversible. Key lock and unlocks lever.

    ver.

    99L
    As low as $427.05
  26. Von Duprin Exit Device 990NL Trim

    The Von Duprin 990NL Trim is the standard NIght Latch Trim for the 99 and 98 Series devices.  The plate is constructed of Bronze or Stainless Steel and then plated to the desired finish.  The plate measures 3" wide by 14-3/16" tall, and includes the mounting screws.  The stanchions coming off the back of the plate line up with the center case mounting screws.  The Rim Cylinder shown in the picture is not included.

    Von Duprin Part # 990NL-R&V

    99NL
    As low as $258.13
  27. Von Duprin Exit Device 990TP Trim

    The Von Duprin 990TP Trim is the standard Thumb Piece Trim for the 99 and 98 Series devices.  The plate is constructed of Bronze or Stainless Steel and then plated to the desired finish.  The plate measures 3" wide by 14-3/16" tall, and includes the mounting screws.  The stanchions coming off the back of the plate line up with the center case mounting screws.  The key cylinder locks and unlocks the thumb piece.  The Rim Cylinder shown in the picture is not included.

    Von Duprin Part # 990TP-R&V

    Cylinder not included.

    99TP
    As low as $343.71
  28. Von Duprin 8827 Exit Device

    Von Durpin 8827 surface mounted vertical rod devicesfor all types of single and double
    doors, UL listed for accident hazard installations.Covers stock hollow metal doors
    with 86 or 161 cutouts and fits door stiles as narrow as 3½" (90mm).

    ● Fully reversible
    ● Five popular finishes
    ● Field sizeable
    ● Hex key dogging
    ● 5/8"(16mm)throw latch bolt

    Ships with all mounting screws and the 299, 304L and 248L-4 Strikes.

    8827EO-
    As low as $1,675.51
View as Grid List

Items 1-36 of 148

per page
Set Descending Direction
Page