Sargent Panic Devices

Make us your go-to spot for ordering SARGENT panic devices online! We carry a wide range of SARGENT panic devices and parts that can be used on doors in schools, offices, and hospitals. When browsing our web store, you will find a long list of SARGENT panic devices and related products that can be used on both a single door and double door or on wood and metal doors. We have the right SARGENT panic devices and hardware for your door project!

SARGENT exit devices have been sold to the public for over half a century now. The company itself has been around for at least a century and a half. To this day, SARGENT manufactures high-quality door products including rim, mortise, and concealed and surface vertical rod devices.

SARGENT Panic Device Products

We carry SARGENT panic devices and parts from several of their product lines. This includes the SARGENT 20 Series, SARGENT 30 Series, SARGENT 60 Series, SARGENT 80 Series, and SARGENT 90 Series.

Products from the 60 Series were only made from the 1970s to 1990. Some of the parts that we offer are the same as the 20 Series, 30 Series, and 80 Series. Please contact us if you would like more information about the 60 Series hardware in our assortment of products.

80 Series SARGENT panic devices are some of the most popular panic devices in today’s industry. We sell the 8700 device and the 8800 rim device from this series.

The 90 Series has been a staple SARGENT panic device since the 1980s. Most of these SARGENT exit devices are now factory orders with a longer lead time, but we stock most replacement parts for this series in our warehouse.

With some of the products in these series, you have the option to choose the color, size, and right or left hand. We also carry replacement parts for SARGENT panic devices. This is because some new hardware may be required when repairing the SARGENT panic device on the door that you are working on.

If you are looking for something specific, you can use the search bar on our website or browse to find the SARGENT panic device or replacement part that you will need for your door. Be sure to select the size, color, and door handing if applicable. Then, you can proceed to check out and complete your order!

About The SARGENT Company

The Sargent brothers founded SARGENT Manufacturing Company in 1857. Over the years, the manufacturing company has grown into one of the largest U.S. hardware factories with over 60,000 products. In 1996, the company was acquired by ASSA ABLOY Door Security Solutions.

SARGENT Manufacturing Company not only produces SARGENT panic devices, but it also makes locks, door closers, and more. Plus, the company makes innovations and unique product designs, one of its latest being electro-mechanical products.

We Ship SARGENT Exit Devices to You

We have SARGENT panic devices and hardware that are currently stocked in our warehouse. The items we have in stock are set to ship within 24 hours. Some custom-made SARGENT panic devices that require a unique finish or size and specific parts have to be factory ordered and shipping for these can take up to 5 weeks. You can always let us know if you have any questions regarding shipping and we will be happy to assist you.

Your SARGENT Panic Device Orders

Order your SARGENT panic devices online with us today, whether it be rim, mortise, concealed, or surface. Our experts are ready to help you choose the best products for your door.

Contact us by phone during business hours on weekdays at 1 (800) 642-2403. You can also contact us via email during the weekend at Sales@RobertBrooke.com so that we can get back to you as soon as possible.

By seeking our guidance, we can make ordering a new SARGENT panic device easy for you. Our knowledgeable staff is here to provide you with assistance with your order of SARGENT exit devices.

View as Grid List

Items 1-36 of 43

per page
Set Descending Direction
Page
  1. Sargent Exit Device Strike 646

    Sargent Exit Device Strike 646

    Sargent Strike measures 1-5/32" x 3-11/16"  with a 3/4" projection.   Strike features a black coated epoxy.

    Sargent Part #646

    G646
    $113.27
  2. Sargent Exit Device Strike 649

    Sargent Exit Device Strike 649

    Sargent Strike measures 1-5/32" x 3-11/16"  with a 3/4" projection.   Strike features a black coated epoxy.

    Sargent Part #649

    649
    $113.27
  3. Sargent Exit Device Strike 624

    Sargent Exit Device Strike 624

    This is the Sargent Standard Bottom Strike for there Surface Vertical Rod Devices. Strike measures 9/16" x 2-1/2" with a 3/8" projection.   Strike features a black coated epoxy.

    Sargent Part #624

    G624
    $82.08
  4. Sargent Exit Device Strike 655

    Sargent Exit Device Strike 655

    This is the Sargent Bottom Strike for there Surface Vertical Rod Devices. Strike measures 1-13/16" x 2-3/4" x 3/32" thick. 

    Sargent Part #655

    G655
    $47.62
  5. Sargent 8700 Exit Device

    For Doors Wood or metal. 1-3/4" (44 mm) thick standard.
    minimum stile with trim and 3-1/2"
    Mounting Supplied standard with wood and machine screws
    Chassis Cover Cold drawn brass, bronze or stainless steel
    Chassis Nonferrous alloy
    Hand Handed. Specify RHRB or LHRB
    Dogging Feature Allen-type dogging furnished standard.
    Top and Bottom Bolts Brass, stainless steel

    8700EO
    As low as $2,193.22
  6. Sargent 8800 Series Rim Device

    For Doors Wood or metal. 1-3/4"(44mm) and 2-1/4" (57mm) thick
    Mounting Supplied standard with wood and machine screws
    Chassis Cover Cold drawn brass, bronze or stainless steel
    Chassis Nonferrous alloy
    Hand Non-handed

    G80EO
    As low as $1,578.81
  7. Sargent 9898 Rim Device

    For Doors Wood or metal. 1 3/4" (44.5mm) thick standard. 2 1/4"(57mm) thick on order.
    4 1/8" (105mm) miminum stile
    Mounting Supplied standard with wood and machine screws.
    Chassis Cover Brass, bronze or stainless steel
    Chassis Nonferrous alloy
    Crossbar 1" brass, bronze and stainless steel tubing.
    Hand Reversible
    Dogging Standard Allen key dogging

    G90EO-
    As low as $2,204.70
  8. Sargent 2727 Exit Device

    Simplicity
    • Engineered with minimum components and maintenance-free
    • Modular design allows for phased component installation. Chassis assembly can be mounted separately to secure the door during construction
    • Retrofits to all applications
    • One chassis design to accept all available functions/trims
    Durability
    • Reinforced cast (ZA) alloy chassis – exceptional strength and durability. Withstands 2X more static load forces compared to a stamped steel chassis
    • Endures over 4 times the ANSI/BHMA A156.3 2001 Grade 1 cycle testing standard
    • Non-handed rim; reversible vertical rod
    • Solid stainless steel latch. Meets UL panic test requirements without roller strikes which compromise strength and durability
    • Three year warranty

    2727EO-
    As low as $1,408.42
  9. Sargent 2828 Series Rim Device

    Simplicity
    • Engineered with minimum components and maintenance-free
    • Modular design allows for phased component installation. Chassis assembly can be mounted separately to secure the door during construction
    • Retrofits to all applications
    • One chassis design to accept all available functions/trims
    Durability
    • Reinforced cast (ZA) alloy chassis – exceptional strength and durability. Withstands 2X more static load forces compared to a stamped steel chassis
    • Endures over 4 times the ANSI/BHMA A156.3 2001 Grade 1 cycle testing standard
    • Non-handed rim; reversible vertical rod
    • Solid stainless steel latch. Meets UL panic test requirements without roller strikes which compromise strength and durability
    • Three year warranty

    G20EO-
    As low as $791.21
  10. Sargent 3828 Series Exit Device

    Sargent 3828 Series Exit Device

    The 3828 is a rugged exit device in a rim design. The 3828 Non Configured Rim Exit Device has 7 functions, 4 available trims and is easy to mix and match the device and trim. Aluminum finish only.

    G30EO-
    As low as $631.71
  11. Sargent 20 Series Night Latch Trim

    • For 1-3/4" (44mm) doors standard
    • Through-bolted with 3 mortise nuts
    • Pulls project 1-1/2" (38mm) from door face
    • GTB Design trim will cover a 161 cutout

    28-K-HTB-
    As low as $194.65
  12. Sargent 20 Series Dummy Trim

    • For 1-3/4" (44mm) doors standard
    • Through-bolted with 3 mortise nuts
    • Pulls project 1-1/2" (38mm) from door face
    • GTB Design trim will cover a 161 cutout

    28-D-GTB-
    As low as $108.96
  13. Sargent 20/30/60/80 Dogging Assembly

    Sargent 20/30/60/80 Dogging Assembly

    We only sell the dogging assembly parts as a complete set. This Dogging Assembly Kit is used on the Sargent 20, Sargent 30, Sargent 60, and Sargent 80 Series Exit Devices. This dogging assembly kit has been around since the 1980's.

    Sargent part # 68-2596

    G80200
  14. Sargent 60/80 Push Bar Pins-Long Pin

    Sargent 60/80 Push Bar Pins-Long Pin

    Also known as the channel axle or pin. This is the pin you see on the exit device channel, the wider of the two pins.

    2-3/16" LONG

    Sargent part # 68-0230

    G680230
    $39.41
  15. Sargent 60/80 Push Bar Pins-Short Pin

    Sargent 60/80 Push Bar Pins-Short Pin

    Also known as the push bar axle, this is the pin that you see on the push pad.

    1-9/16" LONG

    Sargent part # 68-0229

    G680229
    $39.41
  16. Sargent 60/80 Push Bar Pin Retaining Clip

    Sargent 60/80 Push Bar Pin Retaining Clip

    used on Sargent 60 and 80 series to retain the push bar and channel axles. Use with the 68-0229 and 68-0230.

    Sargent part # 01-0098

    G010098
    $1.66
  17. Sargent Exit Device Lever Return Spring

    Sargent Exit Device Lever Return Spring

    This spring is used on Sargent Lever Trims for there Exit Devices.

    2-1/8" LONG

    Sargent part # 97-0425

    G970425
  18. Sargent Exit Device 80 Series Plastic End Cap

    Sargent Exit Device 80 Series Plastic End Cap

    This part is the weak link in this exit device. When the end cap falls off the Dogging Cover Plate falls out also! The end cap is 1-1/8" wide by 2-7/16" tall and projects out 1-7/8".

    Sargent Part # 68-0561

    G80300C
    $32.01
  19. Sargent 80 Series Lexan Touch Pad Kit

    Sargent 80 Series Lexan Touch Pad Kit

    Sargent 80 series Lexan Touch Pad Kit replaces old and or broken touch pad inserts. On the Sargent part break downs this would be Touch Bar part number 68-0607 and Base 68-0606. The base is 13-1/2" long with 3 mounting holes 4" apart on center.

    Sargent Part # 809 KIT

    G80500
    $68.64
  20. Sargent Exit Device 80 Series Metal End Cap And Bracket

    Sargent Exit Device 80 Series Metal End Cap And Bracket

    Use this end cap to replace all older versions and plastic end caps. It is much stronger then the orginals, more impact resistant.

    sargent part # 565

    G80300SS-
    As low as $85.59
  21. Sargent Exit Device 80 Series Plastic End Cap And Bracket

    Sargent Exit Device 80 Series Plastic End Cap And Bracket

    includes the end cap, bracket and mounting screws. This plastic end cap always breaks. You might want to consider trying the new impact resistant end cap shown in the related products, on the right hand margin of the page.

    Used on the Sargent 80 Series Exit Devices

    Part #'s 68-0561, 68-0511 and 97-0052

    G80300
    $77.16
  22. Sargent Exit Device 80 Series Bracket

    Sargent Exit Device 80 Series Bracket

    Used on to hold exit device on door, plastic end cap mounts to it.

    Sargent part # 68-0511

    G80300B
    $49.25
  23. Sargent 700 ET Spindle Kit 730-7

    Sargent 700 ET Spindle Kit 730-7

    This Sargent Kit 730-7 includes the spring, spindle and the associated plates. Look under "More Views" for a detailed look of this repair kit. The 730-7 is for 1-3/4" doors.   Shank measures 4-1/4" long, square spindle is 5/16" square.

    Sargent Part # 730-7

    G7307
    $68.94
  24. Sargent 8700 Top Latch Spring

    Sargent 8700 Top Latch Spring

    The Sargent 8700 Top Latch Spring is used on most of the new and older style Sargent Panic Devices.   The springs measures 1-5/8" overall length.

    Sargent Part # 97-0300

    G970300
    $22.97
  25. Sargent 80 Cylinder Dogging Assy 816

    Sargent 80 Cylinder Dogging Assy 816

    The Sargent 816 Cylinder Dogging Assembly, also known as the 97-3230, includes the cam that the cylinder dogging tends to wear out.

    Sargent Part # 97-3230

    G973230
    $52.53
  26. Sargent Knob Return Spring

    Sargent Knob Return Spring

    This Sargent Knob Return Spring measures 1-1/16" overall length by 3/16" diameter

    Sargent Part # 97-0050

    G970050
    $4.92
  27. Sargent 700 ET Retrofit Kit 730-1

    Sargent 700 ET Spindle Kit 730-7

    This Sargent Kit 730-7 includes the spring, spindle and the associated plates. Look under "More Views" for a detailed look of this repair kit. The 730-7 is for 1-3/4" doors.   Shank measures 4-1/4" long, square spindle is 5/16" square.

    Sargent Part # 730-7

    G7301
    $61.34
  28. Sargent Exit Device 20/60 Plastic End Cap

    Sargent Exit Device 20/60 Plastic End Cap

    Plastic end cap for the Sargent 20 and 60 series. The end cap measures 1-5/8" wide by 2-3/8" tall and projects out 2-3/4".

    Sargent Part # 68-0434

    G20300C
    $38.68
  29. Sargent Exit Device 20/30/60 End Cap And Bracket

    Sargent Exit Device 20/30/60 End Cap And Bracket

    Includes the end cap, bracket and screws

    Used on the Sargent 20, 30 and 60 series Exit Devices

    Sargent Part # 68-0434, 68-2141, and 97-0052

    G20300
    $86.80
  30. Sargent Exit Device 20/30/60 Bracket

    Sargent Exit Device 20/30/60 Bracket

    Bracket holds exit device on the door, and plastic cover mounts to it.

    Sargent part #68-2141

    G20300B
    $51.14
  31. Sargent Exit Device Latch Bolt Spring

    Sargent Latch Bolt Spring.

    Used to put tension on the latch bolt of the 20, 30, 60, and 80 Series Sargent exit devices

    Sargent Part # 98-0028

    G20400
    $4.92
View as Grid List

Items 1-36 of 43

per page
Set Descending Direction
Page