Stair Treads & Risers

Vinyl Stair Treads

Lowest cost protecton for stairs of homes, duplexes and apartments. Modern beauty, durability and safety with this tread. Features extra heavy snap-on nose that fits either square or curved nose wood steps that are between 3/4" and 1-1/8" thick.

SPECIFICATIONS:

Koroseal vinyl rib design stair treads, 1/8" thick, 9-5/8" deep with snap on nose in standard sizes as needed: 18", 24", 30", 36", 42", 48" or 72"; color selected from standard plain colors of brown or black.

334 VINYL STAIR TREADS

Lightweight, economy gauge with a round rib design. Wear and tear resistant Vinyl Stair Treads will give years of service; compares with heavier weight treads. Curve-around nose fits round or square nose steps. Intended for residential or light commercial use.

SPECIFICATIONS:

#334 Koroseal Vinyl economy stair treads, round rib surface design, approximately 5/64" thick, 10" deep with curve-around nose; in standard sizes as needed: 18", 24", 36", 48" or 72"; in standard plain colors of brown or black.

355 Vinyl Stair Treads

Lower cost production for multi-family dwellings, apartment houses, low income housing. This vinyl stair tread with extra long nose is designed to use on a 2” x 12” plank step or molded concrete step. Heavier thickness at front “wear area”. Treads are easy to install; flat rib surface is easy to clean. Meets Fed. Specs. RR-T-650E Type B.

SPECIFICATIONS:

355 Koroseal vinyl rib design stair treads by Musson Rubber; 1/8” thick, 12” deep, with 1-3/4” extra long square nose; contain no asbestos fiber; made of first quality homogenous vinyl, color throughout thickness; free from imperfections which might lessen serviceability. Select standard length of 18”, 24”, 30”, 36”, 42”, 48”, 54”, 60”, 72”, 84” or 96”. Select standard solid color of Brown, Sand, Gray or Black.

375 Vinyl Stair Treads

Designed for use in apartments, urban renewal housing, housing for the elderly and housing projects. Lower initial cost, ease of installation and cleaning, and long service appeals to owner and builder. Extra thick at front; Meets Fed. Specs. RR-T-650E Type B.

SPECIFICATIONS:

375 Koroseal vinyl rib design stair treads; 3/16” thick, 12” deep, 1-1/4” square (or curved) nose; contain no asbestos fiber; made of first quality homogenous vinyl, color throughout thickness; free from imperfections which might lessen serviceability. Select standard length of 18”, 24”, 30”, 36”, 42”, 48”, 54”, 60”, 72”, 84” or 96”. Select standard solid color of Brown, Sand, Gray, or Black.

400 Vinyl Stair Treads

Heavy gauge sharp-rib design Koroseal vinyl treads for heaviest traffic; 1/4" thick at wear area, easily trimmed to cover and fit any stair step. Install over concrete, metal, wood, terrazzo. Extra heavy thickness at the front "wear area". Meets Fed. Specs. RR-T-650E Type B.

SPECIFICATIONS:

No. 400 Koroseal vinyl rib design stair treads 1/4" thick 12" deep; 1-1/4" square nose; contains no asbestos fiber; made of first quality homogeneous vinyl, color throughout thickness; free from imperfections which might lesson serviceability. Select standard length of 24", 30", 36", 42", 48", 54", 60", 72", 84" or 96". Select standard solid colors of Brown, Sand, Gray or Black.

GS365 Vinyl Stair Treads
The economical, nonporous, abrasion resistance and easy cleaning features of Koroseal Vinyl Stair Treads are now combined with the safety features of “Grit-Strips” into one stair tread. Can be used in all but the heaviest traffic areas. Meets Federal Specs. RR-T-650E Type B.

SPECIFICATIONS:

Furnish and install No. GS365 Koroseal Vinyl Stair Treads
Grit-Strip rib design stair treads; 7/32" thick, 12" deep; 1-1/4" square nose; two black* 1" wide abrasive Grit-Strips inlaid in tread, 1” from front edge, spaced 1-1/4" apart; contains no asbestos fiber; made of first quality homogenous vinyl, color throughout thickness; free from imperfections which might lessen serviceability. Select standard length of 36", 42", 48", 54", 60", 72", 84" or 96". Select standard solid color of Brown or Gray.

405CR Vinyl Stair Tread Risers

Plain color cove risers match Koroseal vinyl stair treads; or use a contrasting riser with vinyl or rubber treads; easily trimmed in height and length; savings in installation are substantial; cove risers are same sizes as stair treads.

SPECIFICATIONS:

Furnish and install No 405CR Koroseal vinyl coved stair riser; 1/8” thick, 7” high with 5/8” toe; ribbed back. Select standard length of 18”, 24”, 30”, 36”, 42”, 48”, 54”, 60”, 72”, 84” or 96”. Select standard solid color of Brown, Sand, Gray or Black.

KT18 Vinyl Landing Tiles

Landing tiles are .120" thick by 18" x 18" and designed to go with all the vinyl stair treads.  Available colors are Shale and Amber.  Shale is for use with the Black and Gray treads, and the Amber is for use with the Brown or Sand color treads.

500 SERIES RUBBER STAIR TREADS

Our heaviest gauge molded rubber stair tread; exclusive rectangular design—for safety, durability and ease of maintenance; easily trimmed to exact size of steps. Tapered nosing insures better fit- smooth rear border facilitates cleaning. Meets Federal Specs. RR-T-650E and ZZ-T-001237 (GSA-FSS). Install with #400 Neoprene Contact, #300 Water-based Contact Adhesive or #560 Rubber Flooring adhesive.

Improve appearance, add safety and durability to commercial, industrial or institutional stairways. For universities, schools, hospitals, banks, theatres, hotels, factories, airports, restaurants, shopping malls; all heavily traveled public stairways.

SPECIFICATIONS:

Furnish and install No. 500 Rectangular Design Rubber Stair Treads; 5/16” thick, tapering to back edge; 12-1/2” deep. Treads shall have 1-1/8” square nose; a Flame Spread Rating of 75 or less using ASTM-E-84 Test; a sanded back to assure proper adhesion; contain no asbestos fiber; molded of top quality homogeneous rubber compound; color extending throughout thickness; free from objectionable odors, blisters, cracks or imperfections which might impair serviceability. Select standard length of 36”, 42”, 48”, 54”, 61” or 72”; Select standard color from Color Series I or Color Series II.

Color Chart

1000 Series Rubber Stair Treads Square Nose
An attractive, easy to clean, horizontal bar pattern, with a tapered return nose for better fit rubber stair tread. Extra thick front edge tapers to smooth rear border, makes cleaning easier. Meets Federal Specs. RR-T-650E and ZZ-T-001237 (GSA-FSS).

Recommended for use in churches, apartments, stores, medical buildings, bowling alleys, offices, shopping centers, dormitories, institutions and clubs.

SPECIFICATIONS:
1000 Horizontal Bar Design Rubber Stair Treads; 1/4” thick, tapering to back edge; 12” deep.Treads shall have a 1-3/16” square nose; Select standard length of 36”, 42”, 48”, 54”, 60” or 72”. Select standard color from Color Series I or Color Series II .

An attractive, easy to clean, horizontal bar pattern, with a tapered return nose for better fit rubber stair tread. Extra thick front edge tapers to smooth rear border, makes cleaning easier. Meets Federal Specs. RR-T-650E and ZZ-T-001237 (GSA-FSS). Install with No. 400 Neoprene Contact, No. 300 Water-base Contact Adhesive or No. 560 Rubber Flooring adhesive.

Recommended for use in churches, apartments, stores, medical buildings, bowling alleys, offices, shopping centers, dormitories, institutions and clubs.

SPECIFICATIONS:

Furnish and install No. 1000 Horizontal Bar Design Rubber Stair Treads; 1/4” thick, tapering to back edge; 12” deep.Treads shall have a 1-3/16” square nose (or curved nose); a Flame Spread Rating of 75 or less using ASTM-E-84 Test; a sanded back to assure proper adhesion; contain no asbestos fiber; molded of top quality homogeneous rubber compound, color extending throughout thickness; free from objectionable odors, blisters, cracks or imperfections which might impair serviceability. Select standard length of 36”, 42”, 48”, 54”, 60” or 72”; (54”, 60” and 72” available in square nose only.) Select standard color from Color Series I or Color Series II . (Curved nose available only in Color Series I.)

Color Chart

633 OUTDOOR RUBBER STAIR TREADS
Our new No. 633 Outdoor Rubber Stair Tread is an excellent stair tread for exterior applications. This tread, made from 100% recycled tires, is available in black color only in a diamond pattern with a 3” smooth back border in square nose pattern only.

SPECIFICATIONS:
No. 633 Outdoor Recycled Rubber Stair Treads; 1/4” thick 12-1/2” deep; 1-1/2” square nose; made from 100% recycled tires. Select from standard lengths of 36”, 42”, 48”, 54”, 60” or 72”. Black color only.

622 Rubber Stair Tread Square Nose
A New Design Nose - will easily adjust and adhere to steps with return angle nosings between 90° and 60°; allows good fit on stairways designed for safety or aesthetics.

The original molded rubber diamond design stair tread – half diamond design, half smooth; with a longer adjustable nose to fit pan filled, molded concrete or terrazzo steps. Use in commercial, industrial or institutional buildings. Diamond design surface is 6” deep, covers impact area of pedestrian traffic. Meets Federal Specs. RR-T-650E and ZZ-T-001237(GSA-FSS). Install with Musson #400 Neoprene Contact Adhesive, No.300 Water-based Contact Adhesive or #560 Rubber Flooring Adhesive; use #110 Epoxy Nose Caulk for longer wear and added safety.

Improve appearance, add safety and durability, lessen traffic noise in universities, schools, hospitals, banks, theatres, hotels, airports, restaurants, factories, malls; all heavily traveled stairways.

SPECIFICATIONS:
Furnish and install No. 622 Diamond Design Stair Treads; 1/4” thick, tapering to back edge, 12-1/4” deep. Treads shall have a 1-1/2” adjustable square nose (or curved nose); a Flame Spread Rating of 75 or less using ASTM-E-84 Test; a sanded back to assure proper adhesion; contain no asbestos fiber; molded of top quality homogeneous rubber compound, color extending throughout thickness; free from objectionable odors, blisters, cracks or imperfections which might impair serviceability. Select standard length of 36”, 42”, 48”, 54”, 60” or 72”; Select standard color from Color Series I, Color Series II, or Color Series III. (Curved Nose available only in Color Series I.)

622 RUBBER STAIR TREADS ROUND NOSE
A New Design Nose - will easily adjust and adhere to steps with return angle nosings between 90° and 60°; allows good fit on stairways designed for safety or aesthetics.

The original molded rubber diamond design stair tread – half diamond design, half smooth; with a longer adjustable nose to fit pan filled, molded concrete or terrazzo steps. Use in commercial, industrial or institutional buildings. Diamond design surface is 6” deep, covers impact area of pedestrian traffic. Meets Federal Specs. RR-T-650E and ZZ-T-001237(GSA-FSS). Install with Musson #400 Neoprene Contact Adhesive, No.300 Water-based Contact Adhesive or #560 Rubber Flooring Adhesive; use #110 Epoxy Nose Caulk for longer wear and added safety.

Improve appearance, add safety and durability, lessen traffic noise in universities, schools, hospitals, banks, theatres, hotels, airports, restaurants, factories, malls; all heavily traveled stairways.

SPECIFICATIONS:
Furnish and install No. 622 Diamond Design Stair Treads; 1/4” thick, tapering to back edge, 12-1/4” deep. Treads shall have a 1-1/2” adjustable square nose (or curved nose); a Flame Spread Rating of 75 or less using ASTM-E-84 Test; a sanded back to assure proper adhesion; contain no asbestos fiber; molded of top quality homogeneous rubber compound, color extending throughout thickness; free from objectionable odors, blisters, cracks or imperfections which might impair serviceability. Select standard length of 36”, 42”, 48”, 54”, 60” or 72”; Select standard color from Color Series I, Color Series II, or Color Series III. (Curved Nose available only in Color Series I.)

626 RUBBER STAIR TREADS
A New Design Nose - will easily adjust and adhere to steps with return angle nosings between 90° and 60°; allows good fit on stairways designed for safety or aesthetics.

Our medium gauge Diamond Design Tread with extra long nosing for pan-filled or molded concrete steps. Not only will this 2” depth completely cover pan-filled step nosing, it adjusts from 90° to 60°, to accommodate stairways with return angle nosings. Makes stairways safer for visually impaired and handicapped. Fine for all but heaviest traveled stairways. Square Adjustable Nose. Meets Federal Specs RR-T-650E and ZZ-T- 001237 (GSA-FFS).

Install with No. 400 Neoprene Contact Adhesive, No. 300 Water-based Contact Adhesive or No. 560 Rubber Flooring Adhesive. Use bead of No. 110 Epoxy Stair Caulk inside where nose joins tread.

787 SERIES RUBBER STAIR TREADS
A new design nose - easily adjusts to steps with angle nosings between 90° and 60°; allows fit on stairways designed for safety or aesthetics. Ideal for public buildings where fire safety is a prime prerequisite; durable for heavy traffic areas. Circular discs (3/4” diameter) are easy to clean, affords safer pedestrian traffic. Meets Federal Specs. RR-T-650E. Install with No. 400 Neoprene Contact Adhesive or No. 300 Water-based Contact Adhesive, back of tread and back of nosing; use No. 110 Epoxy Nose Caulk inside of nose.

800 SERIES RUBBER STAIR TREADS
Our Lo-Disc Rubber Stair Tread has the ever popular round disc design in a lighter gauge stair tread. Lo-Disc Rubber Stair Treads have tapered 3/4” discs, raised .025”; are easier to keep clean. An economical, attractive long wearing resilient rubber stair tread with added weight at the front edge; excellent for lighter traffic stairways. Meets Federal Specs. RR-T-650E and ZZ-T-001237 (GSA-FSS). Install with #400 Neoprene Contact Adhesive , No. 300 Water-based Contact Adhesive or #560 Rubber Flooring Adhesive; use #110 Epoxy Nose Caulk for longer wear and added safety.

Adds safety and durability, lessens traffic noise and offers ease of cleaning on stairways in clubs, apartments, churches, motels, stores, institutions, medical offices, bowling lanes and factories.

SPECIFICATIONS:
Furnish and install No.800 Lo-Disc Design Rubber Stair Treads; 3/16” thick, tapering to back edge, 12-1/4” deep. Treads shall have a 1-1/2” square nose; a Flame Spread Rating of 75 or less using ASTM-E-84 Test; a sanded back to assure proper adhesion; contain no asbestos fiber; molded of top quality homogeneous rubber compound, color extending throughout thickness; free from objectionable odors, blisters, cracks, or imperfections which might impair serviceability. Select standard length of 36”, 42”, 48”, 54”, 60” or 72”; Select standard color from Color Series I, Color Series II, or Color Series III.

The 900 Series One Piece Rubber Stair Tread is a newer product that has replaced the 901 Series that we have sold for the last 15 years.  The 900 Series is an American made product produced in Akron, Ohio.   It features a 19-5/8" depth, with a nose that drops down 1-11/16".   The nose has ribs on the leading edge for more slip resistance.  The disc's have a diameter of 1-1/16", and start 2-9/16" from the nose.   The beauty of the raised disc is the ease of cleaning, and with the integrated riser, all the nooks and crannies are not present.   This product is currently available in Color Series I and III, see color chart.

700 SERIES RUBBER STAIR TREADS

Molded Rubber Smooth Flat Surface Rubber Stair Treads 5/16” thick, tapering to back edge, 12-1/2” deep, with square molded nose. Standard sizes: 36”, 42”, 48”, 54”, 60” or 72”; Select standard color from Color Series I.

Color Chart

725 SERIES RUBBER STAIR TREADS

Molded Rubber Smooth Flat Surface Stair Treads, 5/16” thick, tapering to back edge, 12-1/2” deep with a 1-7/8” long adjustable square nose; to fit pan-filled or molded concrete steps. Standard sizes: 36”, 42”, 48”, 54”, 60” or 72”; Select standard color from Color Series I. Adjusta Nose will easily adjust and adhere to steps with return angle nosing between 90° and 60°; allows for good fit on stairways designed for safety or aesthetics.

Color Chart

750 SERIES RUBBER STAIR TREADS

Molded Rubber Smooth Flat Surface Stair Treads, 3/16” thick, tapering to back edge, 12-1/2” deep, with square (or curved) molded nose. Standard sizes: 36”, 42”, 48”, 54”, 60” or 72”, Select standard color from Color Series I or Color Series II.

Color Chart

GS622 RUBBER STAIR TREADS

Molded Rubber Grit Strip Diamond Design Rubber Stair Treads from Musson Rubber Co. 1/4" thick; 12-1/4" deep; with 1-1/2" long adjustable square nose. Treads shall have a sanded back for proper adhesion; molded to top quality homogeneous rubber compound; free of objectionable orders or imperfections which might impair service. Select standard length of: 36", 42", 48", 54", 60" or 72". Select standard color from Color Series I, Color Series II or Color Series III).
One Black 2” wide abrasive Grit-Strip inlaid in tread, 1” from front edge. Model #GS622VI
Two black 3/4" wide abrasive Grit Strips inlaid in tread, 1" from front edge. Model #GS622

Color Chart

The GS900 Series One Piece Rubber Stair Tread with Grit Tape is a newer product that has replaced the GS901 Series that we have sold for the last 15 years.  The 900 Series is an American made product produced in Akron, Ohio.   It features a 19-5/8" depth, with a nose that drops down 1-11/16".   The nose has ribs on the leading edge for more slip resistance.  The disc's have a diameter of 1-1/16", and start 2-9/16" from the nose.   This tread features two options, one is the two 3/4" strips, or the Visually Impaired version which has one 2" wide strip.  The beauty of the raised disc is the ease of cleaning, and with the integrated riser, all the nooks and crannies are not present.   This product is currently available in Color Series I and III, see color chart.

GS787 RUBBER STAIR TREADS

GS787 Grit-Strip Disc-O-Tred Rubber Stair Treads; 1/4” thick tapering to back edge, 12-1/2” deep. Treads shall have an adjustable square nose (1-7/8” deep), a sanded back to assure proper adhesion; made of top quality homogenous rubber compound, color extending throughout thickness; free from objectionable odors or imperfections which might impair serviceability. Select standard length of 36”, 42”, 48”, 54”, 60” or 72”. Select standard solid color from Color Series III.
One Black 2” wide abrasive Grit-Strip inlaid in tread, 1” from front edge. Model #GS787VI
Two Black 3/4" wide abrasive Grit Strips inlaid in tread, 1" from front edge. Model #GS787

250 SERIES RUBBER STAIR TREADS

#250 Molded Rubber Grit-Strip Stair Treads, 3/16” thick; 12-1/2” deep; square (or curved) nose. Two Black* 3/4” abrasive Grit-Strips inlaid in tread 1” from front edge or one Black* 2” wide abrasive Grit-Strip inlaid in tread 1” from front edge. Treads shall be molded of top quality homogenous rubber compound; color throughout thickness; free of odors or imperfections which might impair service. Select standard length of: 36”, 42”, 48”, 54”, 60” or 72”. Select standard color from Color Series I or Color Series II.

Allow 3-4 week lead time

GS500 RUBBER STAIR TREADS

Molded Grit Strip Rectangular Design Rubber Stair Treads from Musson Rubber Co. 5/16 " thick; 12-1/2" deep; with 1-1/8" square nose. Rubber stair treads shall have a sanded back for proper adhesion; molded to top quality homogeneous rubber compound; free of objectionable orders or imperfections which might impair service. Select standard length of : 36", 42", 48", 54", 61" or 72". Select standard color from Color Series I or II.
One Black 2” wide abrasive Grit-Strip inlaid in tread, 1” from front edge. Model #GS500VI
Two black 3/4" wide abrasive Grit Strips inlaid in tread, 1" from front edge. Model #GS500

GS800 RUBBER STAIR TREADS

Molded Rubber Grit Strip Lo-Disc Design Rubber Stair Treads from Musson Rubber Co. 3/16 " thick; 12-1/4" deep; with 1-1/2" square nose. Treads shall have a sanded back for proper adhesion; molded to top quality homogeneous rubber compound; free of objectionable orders or imperfections which might impair service. Select standard length of : 36", 42", 48", 54", 60" or 72". Select standard color from Color Series I, Color Series II or Color Series III.
One Black 2” wide abrasive Grit-Strip inlaid in tread, 1” from front edge. Model #GS800VI
Two Black 3/4" wide abrasive Grit Strips inlaid in tread, 1" from front edge. Model #GS800

200 SERIES RUBBER STAIR TREADS

Molded Rubber Grit-Strip Stair Treads from Musson Rubber Co., 5/16” thick; 12-1/2” deep; square nose. Two Black* 3/4” abrasive Grit-Strips inlaid in tread, 1” from front edge or one Black* 2” wide abrasive Grit-Strip inlaid in tread, 1” from front edge. Treads shall be molded of top quality homogenous rubber compound; color throughout thickness; free of odors or imperfections which might impair service. Select standard length of: 36”, 42”, 48”, 54”, 60” or 72”. Select standard color from Color Series I.

Allow 3-4 week lead time

225 SERIES RUBBER STAIR TREADS

Molded Rubber Grit-Strip Stair Treads from Musson Rubber Co., 5/16” thick; 12-1/2” deep; 1-7/8” long adjustable square nose. Two Black* abrasive Grit- Strips inlaid in tread, 1” from front edge or one Black* 2" wide abrasive Grit- Strip inlaid in tread, 1” from front edge. Treads shall be molded of top quality homogenous rubber compound; color throughout thickness; free of odors or imperfections which might impair service. Select standard length of: 36”, 42”, 48”, 54”, 60” or 72”. Select standard color from Color Series I.

Allow 3-4 week lead time

GSA11 ALUMINUM STAIR TREADS

Diamond hard aluminum oxide abrasives combined with "space-age" polymeric binders are bonded to a heat treated high strength aluminum square nose stair tread. Treads are available GSA75-7-1/2", GSA9-9" or GSA11-11" deep; in one or two contrasting colors per tread. Flat pieces, GSA35-3-1/2" or GSA55 5-1/2" deep, can be used for ramps and other non-step applications or as a filler behind the 7-1/2" treads. Select one color for front insert and the same or a different color for back insert from seven standard abrasive colors of black, brown, blue, gray, green, red or yellow. Maximum lenght is 10 foot. Nose drops 1-1/16".

Install outdoors or indoors on concrete, wood, treated lumber, slate or marble steps. Use for motels, schools, hotels, apartments, condos, hospitals, churches, cruise ships, amusement parks, etc. Offers anti-slip safety surface - protects new steps - renovate slippery, worn steps.

Purchase the 11" model here.

Diamond hard aluminum oxide abrasives combined with "space-age" polymeric binders are bonded to a heat treated high strength aluminum square nose stair tread. Treads are available GSA75-7-1/2", GSA9-9" or GSA11-11" deep; in one or two contrasting colors per tread. Flat pieces, GSA35-3-1/2" or GSA55 5-1/2" deep, can be used for ramps and other non-step applications or as a filler behind the 7-1/2" treads. Select one color for front insert and the same or a different color for back insert from seven standard abrasive colors of black, brown, blue, gray, green, red or yellow. Maximum lenght is 10 foot. Nose drops 1-1/16".

Install outdoors or indoors on concrete, wood, treated lumber, slate or marble steps. Use for motels, schools, hotels, apartments, condos, hospitals, churches, cruise ships, amusement parks, etc. Offers anti-slip safety surface - protects new steps - renovate slippery, worn steps.

Purchase the 9" model here.

Diamond hard aluminum oxide abrasives combined with "space-age" polymeric binders are bonded to a heat treated high strength aluminum square nose stair tread. Treads are available GSA75-7-1/2", GSA9-9" or GSA11-11" deep; in one or two contrasting colors per tread. Flat pieces, GSA35-3-1/2" or GSA55 5-1/2" deep, can be used for ramps and other non-step applications or as a filler behind the 7-1/2" treads. Select one color for front insert and the same or a different color for back insert from seven standard abrasive colors of black, brown, blue, gray, green, red or yellow. Maximum lenght is 10 foot. Nose drops 1-1/16".

Install outdoors or indoors on concrete, wood, treated lumber, slate or marble steps. Use for motels, schools, hotels, apartments, condos, hospitals, churches, cruise ships, amusement parks, etc. Offers anti-slip safety surface - protects new steps - renovate slippery, worn steps.

Purchase the 7-1/2" model here.

SAFETY STAIR TREAD PLATE 10" WIDE

The tread measures 1/4" high by 10" wide. A non-slip abrasive tread material is a blend of carborundum and aluminum oxide, bonded and locked into the aluminum tread. This tread exceeds ADA requirements for coefficinent of friction testing. These treads can not be ripped down to size in the field and are furnished undrilled. This tread is non-cancelable and non-returnable.

The pricing on the website is for specific lengths. They can be ordered to exact lengths, call for more information.

SAFETY STAIR TREAD PLATE 4" WIDE

The tread measures 1/4" high by 4" wide. A non-slip abrasive tread material is a blend of carborundum and aluminum oxide, bonded and locked into the aluminum tread. This tread exceeds ADA requirements for coefficient of friction testing. These treads can not be ripped down to size in the field and are furnished un-drilled. This tread is non-cancelable and non-returnable.

The pricing on the website is for specific lengths. They can be ordered to exact lengths, call for more information.