Stops / Holders

Door Stops / Holders
Selling door stops / holders for Glynn Johnson, Ives, Burns Manufacturing,
Rixson, International Door Closer,  and Grand Specialties for the
past 40 years.

Make sure you click the Text or Image of the Door Stop / Holder
for more information, including the finishes and dimensional information.

View as Grid List

Items 1-36 of 122

per page
Set Descending Direction
Page
  1. 4" Kickdown Door Holder / Stop Grand Standard

    4" Kickdown Door Holder / Stop Grand Standard

    No roll pin at pivot point
    Mallable with a pair of pliers
    Rubber shoe held on by a screw
    American Made

    Made by Grand Specialties

    Zinc plated steel or Brass plated

    Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.

    GJ604-
    As low as $10.62
  2. Gravity Door Coordinator 9 Inch

    Gravity Door Coordinator 9"

    When active door is open, coordinator prevents active door from closing until inactive door bypasses. Closing of inactive door causes strike plate on top of door to contact cam and lift arm, allowing active door to close. As inactive door continues closing, roller rides over strike plate on to door bracket, holding arm above active door.
    Non-handed.
    Gravity action arm and door bracket are adjustable on the job for ease of installation. Rubber roller provides quiet and efficient operation, and helps protect the astragal and doors from damage. Nylon roller on short arm glides smoothly over door bracket and strike, ensuring silent operation. Made of forged brass.
    COR9G-26D for use on pairs of doors with astragal on active door over 4' or with astragal on inactive door over 3'4" or with astragal on both doors over 2'10" Brushed Chrome Finish.

    Ives part # COR9G-26D 9" Arm Projection

    COR9G
  3. Universal Dome Floor Stop FS439

    The Ives Universal Dome Floor Stop FS439 is constructed of cast zinc or stainless steel, depending on the finish.   The stop measures 1-1/2" high, with a base height of 1/4" and base diameter of 1-7/8".   The pad has a height of 1-1/8" from the floor.

    Ives Part Number FS439

    GFS439-
    As low as $12.20
  4. Decorative Floor Stop FS410

    The Ives Decorative Floor Stop FS410 is constructed of cast brass.   It measures 1-1/2" high with a 1-1/4" diameter.  Manufacture part FS410 x Finish.

    GFS410-
    As low as $31.48
  5. 5" Kickdown Door Holder / Stop Grand Standard

    5" Kickdown Door Holder / Stop Grand Standard

    No roll pin at pivot point
    Mallable with a pair of pliers
    Rubber shoe held on by a screw
    American Made
    Zinc plated steel or Brass plated

    made by Grand Specialties 605z 605b

    Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.

    GJ605-
    As low as $11.74
  6. 6" Kickdown Door Holder / Stop Grand Standard

    6" Kickdown Door Holder / Stop Grand Standard

    No roll pin at pivot point
    Mallable with a pair of pliers
    Rubber shoe held on by a screw
    American Made
    Zinc plated steel or Brass plated

    Made by Grand Specialties 606z and 606br
    The 606BR is no longer manufactured 

    Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.

    GJ606-
    As low as $12.03
  7. 8" Kickdown Door Holder / Stops Grand Standard

    8" Kickdown Door Holder / Stops Grand Standard

    No roll pin at pivot point
    Mallable with a pair of pliers
    Rubber shoe held on by a screw
    American Made
    Zinc plated steel

    Made by Grand Specialties 608z

    Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.

    GJ608
  8. 10" Kickdown Door Holder / Stop Grand Standard

    10" Kickdown Door Holder / Stop Grand Standard

    No roll pin at pivot point
    Mallable with a pair of pliers
    Rubber shoe held on by a screw
    American Made
    Zinc plated steel

    made by Grand Specialties 610z

    Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.

    GJ610
  9. 12" Kickdown Door Holder / Stop Grand Standard

    12" Kickdown Door Holder / Stop Grand Standard

    No roll pin at pivot point
    Mallable with a pair of pliers
    Rubber shoe held on by a screw
    American Made
    Zinc plated steel

    Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.

    Made by Grand Specialties 612z

    GJ612
  10. 3" Kickdown Door Holder / Stop Zinc Plated Mickey

    3" Kickdown Door Holder / Stop Zinc Plated Mickey

    Zinc plated cold rolled steel,
    Made in the USA
    3" Arm Length

    made by Grand Specialties

    GJX2M
    $10.66
  11. 4" Kickdown Door Holder / Stop Brass Deluxe

    4" Kickdown Door Holder / Stop Brass Deluxe

    Popular priced crafted holder for interior doors.
    Has 1/2" adjustment and replaceable steel re-inforced
    shoe for long life. Made of steel with brass plated finish.

    Made by Grand Specialties

    GJ6A
  12. 4" Kickdown Door Holder / Stop FS452

    4" Kickdown Door Holder / Stop FS452

    Features:

    • Units provide simple hold and release, activated with a touch of the foot.
    • Cast brass or aluminum construction.
    • Stainless steel spring.
    • Non-marring rubber shoes have corrugated bottoms to provide secure grip.
    • Shoes are easily replaced when worn.
    • FS452-4 has a door-to-floor clearance of 2" or less.
    • Packed with sheet metal screws.

     

    GJ452-4-
    As low as $37.13
  13. 4" Kickdown Door Holder / Stop FS455

    4" Kickdown Door Holder / Stop FS455

    Features:

    • Units provide simple hold and release, activated with a touch of the foot.
    • Cast brass or aluminum construction.
    • Non-marring rubber shoes have corrugated bottoms to provide secure grip and a shank which forms its own thread when screwed into threaded cavity of holder.
    • When worn, shoes are easily replaced.
    • Door-to-floor clearances of 2" or less.

    Made by H.B. Ives

    GJ44-
    As low as $11.22
  14. 4 inch Kickdown Door Holder / Stop FS544

    4" Kickdown Door Holder / Stop FS544

    This is one of our most popular Kickdown Door Holder/Stop for the past 35 years.

    Features:

    • Units provide an economical method to hold open doors.
    • Cast of durable iron.
    • Non-marring rubber shoes have corrugated bottoms to provide secure grip. Rubber shoe is securely fastened with screw. When worn, shoes are easily replaced.
    • FS544 for door-to-floor clearances of 2" or less.
    GJL444-
    As low as $12.38
  15. 5" Kickdown Door Holder / Stop FS452

    5" Kickdown Door Holder / Stop FS452

    Features:

    • Units provide simple hold and release, activated with a touch of the foot.
    • Cast brass or aluminum construction.
    • Stainless steel spring.
    • Non-marring rubber shoes have corrugated bottoms to provide secure grip.
    • Shoes are easily replaced when worn.
    • FS452-5 has a door-to-floor clearance up to 3".
    • Packed with sheet metal screws.

    Ives Part # FS452

    GJ452-5-
    As low as $39.36
  16. 5 inch Kickdown Door Holder / Stop FS555

    5" Kickdown Door Holder / Stop FS555

    Features:

    • Units provide an economical method to hold open doors.
    • Cast of durable iron.
    • Non-marring rubber shoes have corrugated bottoms to provide secure grip. Rubber shoe is securely fastened with screw. When worn, shoes are easily replaced.
    • FS555 for door-to-floor clearances up to 3".

    Made by H.B. Ives

    Door Closer Stop Colors

    GJL555-
    As low as $13.48
  17. Aluminum Flush Bolt FB-1202

    Aluminum Store Front Door Flush Bolt FB-1202

    15/16" x 4-1/4" radius face, 5-7/32" hole spacing, 1/8" offset, 5/8" throw, 12" rod length, with a square nylon tip with beveled corners fits in a 1/2" square hole.

    FB-2202-
    As low as $17.54
  18. Metal Door Automatic Flush Bolts FB31P

    Metal Door Automatic Flush Bolts FB31P

    Fully automatic-inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened. The Ives FB31P Body is 1” wide by 6-3/4” long and 2” deep. Bolt throw is 3/4” with a 7/8” adjustment with a 3/4” backset,  standard rod is 12” which is measured from the center of latch body to the bolt tip.

    Rods are also available in 18”, 24” and 36”, call for pricing.  We ship the 12” rods, and this set would include the top and bottom latches.

    3 Hour UL Listed

    Ives Part # FB31P

    FB31P-
    As low as $195.14
  19. Wood Door Constant Latching Flush Bolt FB61P

    Wood Door Constant Latching Flush Bolt FB61P

    The Ives FB61P is used on the inactive leaf of wood fire doors.   The latch remains extend until the active door is opened.   When the active door is opened the latches retract, and extend when the active door is closed.  The bodies measure 1” wide by 8-1/2” tall and 2” deep.  The bolt throw is 3/4” with a 7/8” vertical adjustment, and has a 3/4” backset.   This package comes with the top and bottom flush bolts with screws and strikes.

    90 minute UL Rated.

    Ives Part # FB61P

    FB61P-
    As low as $179.70
  20. Automatic Floor Type Holder and Stop

    Automatic Floor Type Holder and Stop

    Cast brass construction, and then chrome plated. Measures 3-11/16" high by 3" wide with a 1-15/16" projection. The strike is 1-3/16" high. Spring loaded brass roller, rolls over the the strike to lock the door in the open position. To release, just give the door a tug.

    GJ534-
    As low as $51.15
  21. Crash Chain Door Stop CS115

    Crash Chain Door Stop CS115

    • Specially designed for full-size exterior doors.
    • Tear resistant, grey vinyl cover.
    • Heavy duty compression spring assembled to both ends of chain
      and end brackets.
    • Packed with sheet metal screws.
    • Cast Brass brackets with solid, welded steel chain.

    Available in 20-1/2", 25-1/2" and 30-1/2" lengths. Length is determined
    by the location of your door closer

    PART # LENGTH
    GCC205 20-1/2"
    GCC255 25-1/2"
    GCC305 30-1/2"

    GCC205-
    As low as $55.29
  22. Dome Door Stop 1" Height 522

    Material: Forged Brass with Gray Rubber Bumper
    Size: 1-11/16" × 4" x 5/16" Base x 1" High
    Finishes: US26D-Brushed Chrome Finish Only
    Notes: Traditional slipper low dome design
    Standard Fasteners: Supplied with wood screws and machine screws with anchors
    GJ522
    $16.39
  23. Dome Door Stop 1" Height FS436

    Ives Dome Door Stop 1" Height FS436

    Features:

    • For doors without threshold.
    • Heavy-Duty Cast Dome Stops constructed of brass, bronze or aluminum.
    • Gray, non-marring rubber bumper.

    Overall hgt 1"
    Base Hgt 3/16"
    Base Diameter 1-3/4" x 2" Oval

    GJFB13-
    As low as $6.18
  24. Dome Door Stop 1-1/4" Height 523

    Material: Cast Brass with Gray Rubber Bumper
    Size: 2" × 4" x 1/2" Base x 1-1/4" High
    Finishes: US26D-brushed chrome finish only
    Notes: Traditional slipper high dome design
    Standard Fasteners: Supplied with wood screws and machine screws with anchors
    GJ523
    $22.29
  25. Dome Door Stop 1-5/8" Height 521

    Dome Door Stop 1-5/8" Height 521

    Forged brass construction with a gray rubber bumper. 1-3/4" diameter x 1-5/8" High x 1/4" Base thickness, US26D-Brushed Chrome finish only.
    Supplied with wood screws and machine screws with anchors

    GJ521
    $10.45
  26. Floor Mounted Door Holder / Stop FS446

    Ives Floor Mounted Door Holder FS446

    Features:

    • Manual type floor holder ideal for interior or exterior use.
    • Cast brass or aluminum construction.
    • Accommodates door undercut up to 2-1/2".
    • Non-marring rubber tip.
    • Unit functions as a stop but serves as a Hold-Open device when hook is manually engaged instrike. Unit requires manual disengagement to release Hold-Open.
    • Packed with expansion shield and lead shield.

    Overall Height 3-3/4"
    Height to Stop Center Line 2-5/8"
    Diameter 2-1/2"

    GJF26-
    As low as $42.28
  27. Floor Mounted Door Holder/Stop 536

    Material: Cast Brass or Bronze with Black Bumper
    Size: 2-1/2" diameter Base x 3-7/8" High
    Finishes: US4 brushed brass
    US10B dark bronze
    US26 polished chrome
    US26D brushed chrome
    US3 polished brass
    ANSI: L01371
    Standard Fasteners: (1) lead anchor
    (2) #10 × 1" SMS
    (1) #10 × 1" SMS with plastic anchor
    (1) 5/16-18 × 2-1/2" stud
    (1) 5/16-18 × 2-1/2" hanger bolt
    GJ536-
    As low as $36.42
  28. Floor Mounted Door Holder/Stop FS40

    Ives Floor Mounted Door Holder FS40

    This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF40A or F40A, and was brought over to the H.B. Ives line in the 1990's. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.

    Door to Floor Clearance 1/2" or less
    Holder Dimensions 3" Wide x 3-11/16" High

    GJF40A-
    As low as $63.42
  29. Floor Mounted Door Holder/Stop FS41

    Ives Floor Mounted Door Holder FS41

    Features:
    • Automatic door holders ideal for heavy-traffic situations that require a simple,
    fool-proof, Hold-Open device.
    • Forged from brass.
    • Unit is activated automatically when door is opened. A firm pull on door releases
    the mechanism.
    • Strikes accommodate different door to floor clearances.
    • Model numbers are determined by strike/door-to-floor clearances.
    • Holder position on door is adjustable.

    Door to Floor Clearance 9/16" to 1-1/16"
    Holder Dimensions 3" Wide x 3-11/16" High

    GJF41A-
    As low as $70.02
  30. Floor Mounted Door Holder/Stop FS42

    Ives Floor Mounted Door Holder FS42

    Features:
    • Automatic door holders ideal for heavy-traffic situations that require a simple,
    fool-proof, Hold-Open device.
    • Forged from brass.
    • Unit is activated automatically when door is opened. A firm pull on door releases
    the mechanism.
    • Strikes accommodate different door to floor clearances.
    • Model numbers are determined by strike/door-to-floor clearances.
    • Holder position on door is adjustable.

    Door to Floor Clearance 1-1/8" to 1-9/16"
    Holder Dimensions 3" Wide x 3-11/16" High

    GJF42A-
    As low as $98.12
  31. Floor Mounted Door Holder/Stop FS43

    Ives Floor Mounted Door Holder FS43

    Features:
    • Automatic door holders ideal for heavy-traffic situations that require a simple,
    fool-proof, Hold-Open device.
    • Forged from brass.
    • Unit is activated automatically when door is opened. A firm pull on door releases
    the mechanism.
    • Strikes accommodate different door to floor clearances.
    • Model numbers are determined by strike/door-to-floor clearances.
    • Holder position on door is adjustable.

    Door to Floor Clearance 1-5/8" to 2-1/16"
    Holder Dimensions 3" Wide x 3-11/16" High

    GJF43A-
    As low as $99.20
  32. Floor Mounted Door Stop 524

    Material: Brass
    Size: 1-1/4" diameter x 1-1/2" High
    Finishes: US4 brushed brass
    US26D brushed chrome
    US10B dark bronze
    US3 polished Brass
    ANSI: L02131
    Notes: No exposed fasteners
    Standard Fasteners: (1) #12 × 1-1/2" SMS with plastic anchor
    (1) 12-24 × 1" MS
    (1) lead anchor
    GJ524-
    As low as $23.63
  33. Floor Mounted Door Stop 535

    Floor Mounted Door Stop 535

    Cast Brass or Bronze construction
    2-1/2" diameter base x 3-1/8" high
    Fasteners included

    GJ535-
    As low as $25.20
  34. Floor Mounted Door Stop and Holder

    Floor Mounted Door Stop and Holder
    Manual type door holder ideal for interioror exterior use
    Cast Bronze Construction
    Strike features hinged hook which engages the holder
    Accommodates door undercut up to 2-1/2"

    GJF20-
    As low as $47.17
  35. Floor Mounted Door Stop FS18

    Floor Mounted Door Stop FS18

    Features:

    • Security Door Stops designed for use in high vandalism areas.
    • Molded from flame resistant, resilient material around a heavy-duty stud.
    • Once grouted in concrete, leaves no exposed fasteners to be tampered with or removed.
    • Ideal for jail or security cell areas where floor mounted stops are required.
    • FS18L also ideal for concrete wall applications.
    • Finish: Black, 2" Diameter

    FS18S 1-1/2" Height
    FS18L 3" Height

    GFS18-
    As low as $47.17
View as Grid List

Items 1-36 of 122

per page
Set Descending Direction
Page