Chrome

Chrome Plated Bathroom Partition Keepers and Stops

All keeper bumpers and stops are in stock for fast delivery. Replacing old hardware with new will change your bathroom's to looking new again. All Partition keeper bumpers will come with security screws. All throw latch keepers are required for all handicap doors over 32", 34", 36" width for easy access to the inside door.
RBA Partitions and Parts Catalog

View as Grid List

Items 1-36 of 40

per page
Set Descending Direction
Page
  1. Global Keeper Bumper Concealed

    Global Toilet Partition Keeper Bumper For Concealed Latches 1-1/4" Round Edge Post

    Polished chrome plate Zamac die casting construction. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5510.

    Shipped with mounting screws.

    9G150C
    $7.40
  2. Fiat Keeper Bumper Concealed

    Fiat Partitions Keeper Bumper Concealed And Strike For Concealed Latches Inswing/Outswing 1-1/4"

    Zamac die cast and polished chrome plate construction. Keeper is 1-1/4" tall by 2-3/8" wide by 1-3/4" deep. The strike is a1/2" thick and the slot is 7/16" deep. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5960

    Shipped with screws for mounting.

    Same as the 9S8861

    9F0227
    $7.08
  3. Mills Keeper Bumper Surface Mount

    Mills Keeper Bumper 1-5/8" Between Screws, Surface Mount For Round Edge Posts

    Polished chrome plated Zamac die casting. The strike and keeper measure 2-1/4" high by 29/32" wide and 15/16" deep. The hole spacing is 1-5/8" on center. Also known on Bathroom Stall Strike and Keeper Inswing/Outswing 1-1/4". Manufacture part # 5550.

    Shipped with mounting screws.

    90T316
    $13.56
  4. Chrome Plated Keeper Bumper Inswing Flat Stop

    Chrome Plated Toilet Partition Keeper Bumper Inswing Flat Stop

    Chrome plated Zamac die casting. The strike and keeper measure 2-1/2" tall by 2-9/16" deep and is 1/8" thick. The stop projects out 3/4" and has a rubber insert. The mounting holes are 1-19/32" on center. Also known as a Bathroom Stall Strike and Keeper - Inswing Flat. Flat backed for wall mounting. Manufacture part # 5140

    Shipped with mounting screws.

    90T116
    $5.88
  5. Mills Keeper Bumper Concealed

    Mills Toilet Partition Keeper Bumper For Concealed Latches 1-1/4" Round Edge Post

    Polished chrome plate Zamac die casting construction. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5590.

    Shipped with mounting screws.

    90T317
    $6.33
  6. General Keeper Bumper Concealed

    General Toilet Partition Keeper Bumper For Square Edge 1-1/4" Thick Posts

    Zamac die cast construction and polished chrome plated. The keeper and strike is 2-1/2" tall by 1-7/8" wide. The stop is 17/32" thick and projects out 3/4". The mounting holes are 1-1/2" on center. The locking slot is 7/16" deep. Generally used with concealed latches. Also known as a Bathroom Stall Strike and Keeper - Inswing/Outswing 1-1/4". Manufacture part # 5230.

    Shipped with mounting screws.

    92560E
    $7.84
  7. Keeper Bumper- Outswing For 1-1/4" Sq Edge

    Keeper Bumper- Outswing For 1-1/4" Sq Edge Chrome Plated Construction

    Used on many toilet partition manufacturers partitions, known as 40-8512354.

    9A2354
    $11.39
  8. Chrome Plated Keeper Bumper Flat Stop 1-1/2" Screws

    Chrome Plated Toilet Partition Keeper Bumper Flat Stop 1-1/2" Between Screws

    Polished chrome plated Zamac construction. The strike and keeper measure 2-1/2" high by 1-13/16" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. The slot is for the concealed latch is 7/8" high by 7/16" deep. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing Flat. Manufacture part # 5240

    Shipped with mounting screws.

    9A5240
    $6.96
  9. Chrome Keeper Bumper Flat Stop 1-1/2" Outswing

    Chrome Plated Toilet Partition Keeper Bumper Flat Stop 1-1/2" Between Screws, For Outswing

    Polished chrome plated Zamac construction. The strike and keeper measure 2-1/2" high by 1-5/8" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. Also known as a Bathroom Stall Strike and Keeper Outswing Flat. Manufacture part # 5260

    Shipped with mounting screws.

    9A5260
    $5.12
  10. Chrome Plated Keeper Bumper Inswing 1-1/4"

    Chrome Plated Toilet Partition Keeper Bumper Inswing 1-1/4" Round Edge

    Polished chrome plated Zamac die casting. The strike and keeper measures 1-7/8" wide by 2-1/2" tall by 1-1/2" deep. The stop measures 2-1/2" tall and projects out 3/4" and has a rubber insert. The two slots have a 1/4" opening by 13/16". Also known as a Bathroom Stall Strike and Keeper Inswing 1-1/4". Manufacture part # 5330

    9A5330
    $7.79
  11. Chrome Plated Bumper Keeper 1-1/4" Round Edge

    Chrome Plated Toilet Partitions Bumper Keeper For 1-1/4" Round Edge

    Polished chrome plated Zamac construction. The strike and keeper measures 2-1/2" tall by 1-7/8" wide. The mounting holes are 1-1/2" on center. The stop measures 3/4" wide by 17/32" deep with a rubber insert bumper. Slot is 7/16" deep. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing 1-1/4". Manufacture part # 5430.

    Shipped with mounting screws.

    9A5430
    $13.92
  12. Outswing Keeper Bumper, 1-1/4" Round Edge

    Outswing Keeper Bumper, 1-1/4" Round Edge

    Polished chrome plate Zamac die casting construction. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5570.

    Shipped with mounting screws.

    9A5570
    $7.59
  13. Inswing Keeper Bumper 1-1/4" Round Edge

    Toilet Partition Inswing Keeper Bumper 1-1/4" Round Edge Post

    Zamac die cast and polished chrome plate construction. Keeper is 1-1/4" tall by 2-3/8" wide by 2-9/16" deep. The strike is a17/32" thick and the slot is 1/4" deep. The opening to mount it on the round edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing 1-1/4". Manufacture part # 5580

    Shipped with screws for mounting.

    9A5580
    $7.91
  14. Chrome Plated Keeper Bumper 1-1/4" Round Edge

    Chrome Plated Toilet Partition Keeper Bumper For 1-1/4" Round Edge Post

    Polished chrome plated Zamac construction. The strike and keeper measure 1-1/4" high by 2-3/8" wide by 1-3/4" deep. The stop is 1/2" thick and projects out 1-1/8". The slot is 7/16" wide by 5/8" high. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing 1-1/4". Manufacture part # 5590.

    Shipped with mounting screws.

    9A5590
    $6.33
  15. Bobrick Keeper Bumper Inswing

    Bobrick Toilet Partition Keeper Bumper For 1" Inswing Square Edge Post

    Polished chrome plate Zamac die casting construction. Strike and Keeper measures 2-1/2" high by 1-15/16" wide. Stop is 17/32" thick and projects out 13/16". The screw holes are 1-1/2" on center. The slot is 5/16" deep by 1-1/2" high. This Bathroom Toilet Door Keeper is designed for use on 1" thick square edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing 1". Manufacture part # 5620.

    Shipped with mounting screws.

    9A5620
    $13.28
  16. Chrome Plated Keeper Bumper Flat Stop Outswing

    Chrome Plated Partition Keeper Bumper Flat Stop Outswing Door

    Chrome plated Zamac die casting. The strike and keeper is 1-1/4" high by 1-3/4" deep by 1/8" thick. The stop is 1/2" deep by 1-1/4 wide with a rubber insert. Also known as a Bathroom Stall Strike and Keeper Outswing Flat. Manufacture part # 5640.

    Shipped with mounting screws.

    9A5640
    $13.20
  17. Bobrick Keeper Bumper For 1" Outswing Sq Edge

    Bobrick Toilet Partition Keeper Bumper For 1" Outswing Square Edge Post

    Polished chrome plate Zamac die casting construction. Strike and Keeper measures 2-1/2" high by 1-15/16" wide. Stop is 17/32" thick and projects out 13/16". The screw holes are 1-1/2" on center. This Bathroom Toilet Door Keeper is designed for use on 1" thick square edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Outswing 1". Manufacture part # 5720.

    Shipped with mounting screws.

    9A5720
    $10.12
  18. Chrome Plated Bumper Keeper 1" Sq Edge

    Chrome Plated Toilet Partition Bumper Keeper For 1" Square Edge Post

    Polished chrome plated Zamac construction. The strike and keeper measures 2-1/2" tall by 1-15/16" wide by 1-17/32 deep. The mounting holes are 1-1/2" on center. The stop measures 7/8" wide by 17/32" deep with a rubber insert bumper. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing 1". Manufacture part # 5730.

    Shipped with mounting screws.

    9A5730
    $14.67
  19. Bobrick Inswing Keeper Bumper For Throw Latch For 1" Sq Edge

    Bobrick Toilet Partitions Inswing Keeper Bumper For Throw Latch For 1" Sq Edge Post

    Polished chrome plated Zamac construction. The strike and keeper is 2-1/2" tall by 1-15/16" wide. The mounting holes are 1-1/2" on center. The stop is 2-1/2" tall by 13/16" projection with a rubber insert. The two slots are 5/16" deep by 13/16" high. Also known as Bathroom Stall Strike and Keeper Inswing 1". Manufacture part # 5820.

    Shipped with mounting screws.

    9A5820
    $10.12
  20. Outswing Keeper Bumper, 1-1/4" Post Sq Edge

    Outswing Keeper Bumper, 1-1/4" Post Sq Edge

    Zamac die cast and polished chrome plate construction. Keeper is 1-1/4" tall by 2-3/8" wide by 1-13/16" deep. The strike is 1/2" thick with rubber insert. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5970

    Shipped with screws for mounting.

    9A5970
    $7.59
  21. Keeper Bumper Inswing 1-1/4"

    Zamac die cast and polished chrome plate construction. Keeper is 1-1/4" tall by 2-3/8" wide by 2-9/16" deep. The strike is a17/32" thick and the slot is 7/16" deep. The opening to mount it on the square edge pilaster or post is 1-1/4" by 1-1/4" Also known as a Bathroom Stall Strike and Keeper for Inswing 1-1/4". Manufacture part # 5980

    Shipped with screws for mounting.

    9A5980
    $7.59
  22. Keeper Bumper For Throw Latch Inswing Flat Stop

    Chrome Plated Partition Keeper Bumper For Throw Latch Inswing Flat Stop

    Chrome plated Zamac die casting. The strike and keeper measure 2-1/2" tall by 2-9/16" deep and is 1/8" thick. The stop projects out 3/4" and has a rubber insert. The mounting holes are 1-1/2" on center. Slots are 1/4" deep by 13/16" high. Also known as a Bathroom Stall Strike and Keeper - Inswing Flat. Flat backed for wall mounting. Manufacture part # 5280

    Shipped with mounting screws.

    9A5985
    $10.12
  23. Keeper Bumper For Throw Latch, For Inswing Flat Stop

    Chrome Plated Partition Keeper Bumper For Throw Latch, For Inswing Flat Stop

    Chrome plated Zamac die casting. The strike and keeper is 1-1/4" high by 2-1/2" deep by 1/8" thick. The stop is 1/2" deep by 1-1/4 wide with a rubber insert. The slots are 1/4" deep. Also known as a Bathroom Stall Strike and Keeper Inswing Flat. Manufacture part # 5650.

    Shipped with mounting screws.

    9A5990
    $12.02
  24. Fiat Keeper Bumper Out Swing for 1-1/4"

    Fiat Partitions Keeper Bumper For 1-1/4" Outswing Square Edge Pilaster Or Post

    Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for outswinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5210

    Shipped with mounting screws.

    9F0303
    $6.77
  25. Fiat Keeper Bumper For 1-1/4" Inswing Sq Edge

    Fiat Toilet Partitions Keeper Bumper For 1-1/4" Inswing Sq Edge Pilaster Or Post

    Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for inswinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5110

    Shipped with mounting screws.

    9F0304
    $7.17
  26. Chrome Plated Keeper Bumper For 1-1/4" Inswing Round Edge

    Chrome Plated Keeper Bumper For 1-1/4" Inswing Round Edge Post

    Zamac die cast and polished chrome plate construction. The strike and keeper measure 2-1/2" high by 1-7/8" wide with a hole spacing of 1-1/2" on center. The stop is 2-1/2" tall by 3/4" wide with a rubber insert. The slot measures 1-9/16" high by 5/16" deep. Commonly known as a Bathrrom Stall Strike and Keeper Inswing 1-1/4". Manufacture part # 5310

    Shipped with mounting screws.

    9G0151
    $7.17
  27. Chrome Plated Keeper Bumper For 1-1/4" Outswing Round Edge

    Chrome Plated Keeper Bumper For 1-1/4" Outswing Round Edge Post

    Zamac die cast and polished chrome plate construction. The strike and keeper measure 2-1/2" high by 1-7/8" wide with a hole spacing of 1-1/2" on center. The stop is 2-1/2" tall by 3/4" wide with a rubber insert. Commonly known as a Bathrrom Stall Strike and Keeper Outswing 1-1/4". Manufacture part # 5410

    Shipped with mounting screws.

    9G015E
    $6.77
  28. Global Keeper Bumper Concealed

    General Toilet Partition Keeper Bumper For Square Edge 1-1/4" Thick Posts

    Zamac die cast construction and polished chrome plated. The keeper and strike is 2-1/2" tall by 1-7/8" wide. The stop is 17/32" thick and projects out 3/4". The mounting holes are 1-1/2" on center. The locking slot is 7/16" deep. Generally used with concealed latches. Also known as a Bathroom Stall Strike and Keeper - Inswing/Outswing 1-1/4". Manufacture part # 5230.

    Shipped with mounting screws.

    9G631H
    $6.77
  29. Hadrian Keeper Bumper 1-1/4" Round Edge

    Hadrian Toilet Partition Keeper Bumper Chrome Plated, Also known as 601800, Rectangle slot 9/16" x 11/16"
    9HH800
    $13.60
  30. Knickerbocker Keeper Bumper 1-1/4" Round Edge

    Knickerbocker Keeper Bumper 1-1/4" Round Edge, also known as 152zap, 5470. Used with Knickerbocker and General Partitions.
    9K0152
    $27.83
  31. Metpar Keeper Bumper Concealed

    Metpar Partitions Keeper Bumper 1-1/4" Round Edge Post

    Polished chrome plate Zamac die casting construction. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-1/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/32" deep. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5520.

    Shipped with mounting screws.

    9OC410
    $8.22
  32. Sanymetal Keeper 2 Between Screws

    Sanymetal Partition Keeper 2" Between Screws Inswing Flat


    Polished chrome plated Zamac construction. Keeper base is 3" high by 1-1/16" wide with a 2" hole spacing. Strike is 3" tall by 7/8" deep. The material 1/8" thick. The slot is 1-1/8" high by 1/4". Also known as a Bathroom Stall Keeper Inswing Flat. Manufacture part # 5130.

    Shipped with mounting screws.

    9S2401
    $12.65
View as Grid List

Items 1-36 of 40

per page
Set Descending Direction
Page