Locker Parts

Double Prong Ceiling Hook

Heavy Duty Zinc Plated Steel Wire.
2-3/4" height
3-1/2" wide
1/4" diameter wire
7/8" hole spacing

All Steel Equipment Locker Handle Manufactured in the USA. Overall length 5-3/16" and 1-1/2" between screws. Includes screws. Also known as 10103, 5050, 77001, as8802, las103.

J Hook Ceiling Mount Locker Hook zinc plated steel. The overall height is 2-5/8" x 1-7/16" width. The two center mounting holes are 1/2" between screws. Manufacturer's part number is 650-3124. This material is zinc plated steel. 3/16" material used.

Single prong locker hooks for coat rods and school type lockers. The hook is made from a metal 1/8" diameter tube x 4-3/4" ht x 2" width. These locker hooks are wall mounted to the locker back or sides. The hole spacing is 3/4", the top hole is 3/16" round with the one lower.& Also known as 8699.

All Steel Equipment Locker Handle Assembly, include case, lift and screws. All UnPlated. Hole spacing 3-3/8" on case portion, over all length 4-1/4". Also known as 10101, 5100, 77002, as8801, las102. These Handles are not Plated****

All Steel Equipment Box Locker Latch. Also known as 10501, 77013, as8805, las105.

All Steel Equipment Locker Catch. Manufactured in the USA. Also known as 10503, 77012, as8806, las107.

All Steel Equipment Box Locker Latch only.

All Steel Equipment Box Locker Stud. Also known as 72009, 2575, 70015, rs1120.

All Steel Equipment Locker Door Jamb. Overall height 2-1/8". Manufactured in the USA. Also known as 5580, 77007, as8811.

All Steel Equipment Locker Door Jamb. Overall height 1-5/8". Also known as 10301, 5555, 77005, as8809, las109. Made in the U.S.A.

All Steel Equipment Locker Hinge. Also known as 11101, 5300, 77003, as8803, las110.

Single Prong Locker Hooks for school type lockers. The hook is made from a metal 3/16" diameter tube x 3-1/4" ht x 2" width. These locker hooks are wall mounted to the locker back or sides. The hole spacing is 3/4" or 1-1/4", the top hole is 1/4" round with the two lower as 3/8" slots. Also known as 9010, 81006, bu0111, lu126, 8697.

All Steel Equipment Locker Hinge Clip. Also known as 11102, 3555, 77004, as8804.

All Steel Equipment Locker Latch Spring. Used with 115295 rivet.

All Steel Equipment Locker Padlock Eye. Also known as 10701, 5075, 77006, as8810. Dimensions are 1-1/4" wide by 1-1/4" if flat. The bend is in half 5/8". The hole spacing is 3/4" with a 5/16" hole.

All Steel Equipment Locker Rivet For latch spring 115293. Same as 5475.

All Steel Equipment Locker Screw, 8-32x 3/8"self thread.

ASI Locker Coiled Spring used with ASI, Edsal, List Industries and Penco lockers. Manufactured in the USA for the past 25 + Years. Also known as 8650, 4120, 74015, pn3305, lp8828. This spring is used with the catch clip on a lock bar on the inside of the locker door that helps catch and release the door from being locked or unlocked.

ASI Locker Nylon Latch Clip used with ASI, Edsal, List Industries and Penco lockers. Manufactured in the USA for the past 25 + Years. Also known as 8651, 60501, 4125, 74016, pn3310, lp8827, ls645. This part attaches to the lock bar that rides vertically and latches on the locker frame hook to secure and lock it. This is a very common part to break due to it being a plastic catch clip.

ASI Locker Lock Bar 20-7/8" includes lock bar, lifter, trigger, latch clips and coiled springs. For double tier lockers, 60" overall height of lockers. The lock bar is what is riding vertically to lock and unlock from the frame of the locker. When a person lifts up on the locker handle it is attached to the lock bar which releases the door from the frame of the locker.

ASI Locker Lock Bar 27" includes lock bar, lifter, trigger, latch clips and coiled springs. For double tier lockers, 72" overall height of locker. The lock bar is what is riding vertically to lock and unlock from the frame of the locker. When a person lifts up on the locker handle it is attached to the lock bar which releases the door from the frame of the locker.

ASI Locker Lock Bar 50-7/16" includes lock bar, lifter, trigger, latch clips and coiled springs. The lock bar is what is riding vertically to lock and unlock from the frame of the locker. When a person lifts up on the locker handle it is attached to the lock bar which releases the door from the frame of the locker.

ASI locker recess lifter handle in black color. The lifter attaches to the lock bar which releases the door from the frame and unlocks the door. This is an Ada locker handled and is now a standard in the locker industry. The trigger is now sold separately if this is all you need. 

ASI locker Recess Handle for Multi Point Latching lockers with moving parts. The recess handle is Ada approved and is the new standard for lockers. The recess handle is a stainless steel product that will not rust. This lock bar is used with a lock bar that rides vertically and releases the door from the frame to unlock it.

ASI locker Recessed Handle for Single Point Latching on lockers with no moving parts. The recess handle is Ada approved and is the new standard for lockers. When the door shuts closed there is a slot for the padlock eye to go through the recess handle for a padlock or built in lock to keep the door closed. This locker handle is made of stainless steel and very common to the locker industry.

Aurora Steel Product Locker Face Plate. Also known as 20105, 81001, au6602, lar209.

Aurora Steel products Locker handle. Also known as 20109, 81005, au6601, lar211.

Aurora Steel product Locker Hinge.

Aurora Steel Product Locker Latch Only. Also known as 20501, 7220, 81016, au6606.

Aurora Steel Product Locker Latch Coil Spring Only. Also known as 21503, 7755, 81015, au6606, lar217.

Aurora Steel Product Locker Latch Pin Only. Also known as 22003, 7811, 81013, au6606, lar216.

Aurora Steel Product Locker Lift Cover. Also known as 20107, 81002, au6603, lar210.

Aurora Steel Product Locker Lift Pin Only.

Aurora Steel Product Locker Lift Spring Only.

Aurora Steel Product Locker Retaining Rivet. Measurements Length 3/8"ht x head 1/4", stem diameter 1/8" Made of Steel