Strikes

Panic device strikes, also known as exit device strikes, are parts for exit devices that should always be kept up-to-date. Like any hardware, these kinds of strikes should be replaced if worn out or broken, and we have just the hardware for that sort of repair. Choose Robert Brooke & Associates as your primary shop for panic device strikes and other relevant hardware!

Panic device strikes typically align with the manufacturer and the manufacturer series, one example being that the Von Duprin 299 Strike will not be compatible with a Corbin Russwin ED8200. It will be helpful to know the manufacturer of your panic device strike and or any panic device hardware. Having this key piece of information can help you determine precisely what type of panic device strike you will need to look for. If you don’t know the specific branding of your panic device strikes or the device itself, feel free to email us a photo of both so that we can find a match for the right part.

Our website contains two pages full of different styles of panic device strikes available for online purchase, approximately 50 panic device strikes total. All of the panic hardware that we stock is made by a top-tier manufacturer in the industry. 

Order your panic device strikes online today! Please don’t hesitate to contact us for help. We are always happy to assist with your order.

Panic Device Strike Features

Our online selection includes but is not limited to electric strikes, top strikes, bottom strikes, and surface vertical rod panic device strikes. The electric strikes that we carry fall under either the Von Duprin or HES brand with four variations of Von Duprin panic device strikes and two of HES. 

The Von Duprin electric strikes in our selection are compatible with rim exit devices. Whether you select stainless steel or dark bronze, you will also have the option of choosing between fail-secure (FSE) or fail-safe (FS). The FSE version is fire-rated whereas the FS is non-fire-rated. For the HES electric strikes we have available, you have the option of choosing the finish or color. 

There are also panic device strikes that should specifically either be installed on the top or on the bottom of a device. Both Falcon and Yale brands offer styles of bottom and top strikes.

The Sargent has two styles of bottom strikes that we have on our site. These are the Sargent 624 panic device strike and the Sargent 655 panic device strike which are compatible with surface vertical rod devices. These have a black coated epoxy, along with the Sargent 649 panic device strike and the panic device strike Sargent 646.

Some of the panic device strikes in our stock are compatible with rim exit devices. The rim exit device strikes in our online list are manufactured by either Corbin Russwin or Von Duprin.

We also have dust proof strikes, roller strikes, strike shims, and semi-mortise strikes, to name a few. All of the products come with specific features unique to them which can typically be found in the product description.

If you require clarity on whether you need an electric strike, top strike, bottom strike, or a strike for a rim exit device, we have answers for you! A Robert Brooke associate will be delighted to assist in clarifying any details that will help with your order.

Call About Your Panic Device Strike Order!

We’re here to lend our expertise! Whether you are seeking shipping and payment details, product information, information regarding device compatibility, or answers to another question, you are always welcome to inquire about your order. Robert Brooke & Associates has been in business for more than 50 years! Our team has the collective knowledge and industry experience to ensure that you receive the most suitable panic device strikes for the doors in your facility.

Reach out to us via phone or email and one of our skilled professionals will help you out. Catch us Monday through Friday from 8 a.m. to 5 p.m. Eastern Standard Time! The staff at Robert Brooke always likes to make your RBA experience as quick and easy as possible, so please let us know how we can be of assistance.

View as Grid List

Items 1-36 of 54

per page
Set Descending Direction
Page
  1. Adams Rite 8700/8800 Strike

    Adams Rite 22-0430-IP 8700/8800 Strike is used on the rim devices that have the Star Wheel Latching System.  The strike measures 2-3/4" long by 1-3/4" wide and projects out approximately 3/8".

    G8800STK
    $14.62
  2. Adams Rite 8700/8800 Strike 91-0993-IP

    Adams Rite 91-0993-IP 8700/8800 Strike is used on the rim devices that have the Star Wheel Latching System.  The strike measures 2-3/4" long by 1-3/4" wide and projects out approximately 1/2".   Kit comes with mounting screws and two shims.

    G910993
    $29.22
  3. Cal Royal 938 Surface Strike

    The Cal Royal 938 Surface Strike is used on the 7700 and 5000 Series Rim Devices.  The strike includes all the mounting screws.

    G938
    $29.22
  4. Cal-Royal 221 Bottom Strike

    The Cal-Royal 221 Bottom Strike is used on the 2000, 5000, 7000 and 9000 Panic Bars with Surface Vertical Rods.

    G221
    $16.50
  5. Corbin Russwin ED4000/5000 Rim Strike

    Corbin Russwin ED4000/5000 Rim Strike

    Standard strike for the ED4200 and ED5200 Rim Panic Devices.

    Corbin Russwin part # 650F29

    G650F29
    $117.26
  6. Detex Advantex 98 Semi-Mortise Strike

    Detex Advantex 98 Semi-Mortise Strike

    98 Semi-Mortise-applied strike for 10 an d40 series Rim Devices

    Detex Part # 100855-1

    DE98
    $46.76
  7. Detex Advantex 99 Surface Strike

    Detex Advantex 99 Surface Strike

    99 Surface - non-roller strike for 10 and 40 series Rim Devices. Base measures 3" high by 1-3/16" wide and projects out 7/8".

    Detex Part # 100855-2

    DE99
    $45.15
  8. Dorma Rim Device Strike 463

    The Dorma Rim Device Strike 463 is used on the 8300, 8300F, 9300 and 9300F exit devices. Mounting screws included.

    G463
    $83.58
  9. Dorma Surface Vertical Rod Top Strike 426

    The Dorma Surface Vertical Rod Top Strike 426 is used on the 8400, 8400F, 9400 and 9400F devices. Shims and mounting screws included.

    G426
    $54.94
  10. Doromatic Exit Device 1690/1990 Top Strike PB48

    Dor-o-Matic top strike.

    Used on the Dor-o-Matic 1490, 1690, 1990 and 2390 Concealed Vertical Rod Exit and Panic Devices. The plate measures 1" x 1-1/16" with 4 holes. The mounting holes are 11/16" x 11/16" on center. The diameter of the pin is 7/16" and projects out 5/32". Ships with mounting screws and 3 shim plates.

    Doromatic part # PB48

    Dor-o-Matic 990/1990 Repair Parts Breakdown
    Dor-o-Matic 1690 Repair Parts Breakdown

    G199034
    $27.88
  11. Doromatic PB48 Strike Shim Package

    Doromatic PB48 Strike Shim Package Of 10 Pieces

    This Dor-o-Matic product is for the PB48 Top Strike. This is the shim that goes under the top strike. The plate measures 1" x 1-1/16" with 4 holes. The mounting holes are 11/16" x 11/16" on center. They are only sold in packages of 10.

    Doromatic Part # SHIM.112

    G199034-SHIM
    $30.98
  12. Falcon STK70 Mullion Strike

    The Falcon Doromatic Adjustable Mortise STrike STK70 is used on their mullions.  This is the strike that fits in the tear drop shapped mullion. They measure 2-3/8 inches tall by 1-7/16 inches wide and are 1" thick.  They are sold in sets, enough for 1 mullion.

    GSTK70
    $93.48
  13. Falcon STK170 Mullion Strike Kit

    The Dor-O-Matic STK170 are the strikes used on their RM170.  The are sold as a kit and include both plates, enough for one mullion.  They 2-7/8 inches tall by 1-3/4 inches wide and 1 inch thick.

    STK170
    $98.97
  14. Doromatic Surface Strike STK45

    Doromatic Surface Strike STK45

    This strike is used when we have a double door application without a center post. By using this strike we can have one door with a surface vertical rod and one door a rim device, which will save money because vertical rods are usually expensive. This strike can be used with the 1590, 1790 and 2090 Rim Devices. The strike base measures 1-5/16" wide by 3-1/4" high, and 1/4" thick. The three slots are 1-1/4" on center. This strike ships with the mounting screws.

    US19-Black finish

    STK45
    $97.58
  15. Dust Proof Strike DP1

    • Designed for use with the bottom bolt of all flush bolts.
    • Spring-loaded plunger returns to floor or threshold level anytime
      flush bolt is retracted, eliminating need to clean standard
      floor strikes.
    • Strike hole is 3/4" Diameter and 1-1/8" Deep

    DP1 Face Plate: 1-7/16" Diameter
    Body: 1-3/16" Diameter x 1-7/8" Deep

    DP1-
    As low as $26.58
  16. Dust Proof Strike DP2

    • Designed for use with the bottom bolt of all flush bolts.
    • Spring-loaded plunger returns to floor or threshold level anytime
      flush bolt is retracted, eliminating need to clean standard
      floor strikes.
    • Strike hole is 3/4" Diameter and 1-1/8" Deep

    DP2 Face Plate: 1-5/8" W x 3-1/2" L x 1/8" Thick
    Body: 1-3/16" Diameter x 1-7/8" Deep

    DP2-
    As low as $30.21
  17. Jackson 2085-3185 Top Strike Package

    The Jackson 2085-3185 Top Strike Package is mounted on the frame of the door were the top latch can engage it.   The Package includes the Strike, Plate, Latch Adjusting Wrench and the Mounting Screws.   Jackson Part Number 30-1345.

    G301345
    $38.71
  18. Jackson 1085/1285/2086 Strike Package

    The 1085/1285/2086 is mounted on the frame at the top of the door and in the floor at the bottom.   The Package includes the Strike, Plate, Latch Adjusting Wrench and the Mounting Screws.   Jackson Part Number 30-0846.

    G108588
    $21.92
  19. Monarch Falcon 2130 Bottom Latch Strike

    Monarch Falcon 2130 Bottom Latch Strike

    The Monarch Falcon 2130 Bottom Latch Strike is used on the 19-V, 24-V, 25-V and XX-V devices.  This strike usually fits into the threshold or is recessed into the floor.

    Falcon Part # 2130

    G2130
    $49.56
  20. Monarch Falcon 299 Strike for 25-R and 24-R Devices

    Monarch Falcon 299 Strike for 25-R and 24-R Devices

    The Monarch Falcon 299 Strike is used on the 25-R and 24-R Devices.  The 299 strike measures 1-1/4" wide by 2-7/8" high with a slotted hole spacing of 2-1/8". The roller projects out 13/16".  This strike is the same as the Von Duprin 299 Strike.

    Ships with shim and mounting screws

    Falcon Part # 299

    Fa299
    $62.81
  21. Monarch Falcon 3788 Top Latch Strike

    Monarch Falcon 3788 Strike Top Strike

    The Monarch Falcon 3788 Top Latch Strike is used on the 19-V, 24-V, 25-V and XX-V devices.

    Falcon Part # 3788

    G3788
    $52.66
  22. Monarch Falcon F570 Strike for 19-R Devices

    Monarch Falcon F570 Strike for 19-R Devices

    The Monarch Falcon F570 Strike for 19-R Devices is used on the Fire and Non Fire Rated Devices.

    Falcon Part # F570

    570
    $53.98
  23. Sargent Exit Device Strike 624

    Sargent Exit Device Strike 624

    This is the Sargent Standard Bottom Strike for there Surface Vertical Rod Devices. Strike measures 9/16" x 2-1/2" with a 3/8" projection.   Strike features a black coated epoxy.

    Sargent Part #624

    G624
    $78.17
  24. Sargent Exit Device Strike 646

    Sargent Exit Device Strike 646

    Sargent Strike measures 1-5/32" x 3-11/16"  with a 3/4" projection.   Strike features a black coated epoxy.

    Sargent Part #646

    G646
    $107.88
  25. Sargent Exit Device Strike 649

    Sargent Exit Device Strike 649

    Sargent Strike measures 1-5/32" x 3-11/16"  with a 3/4" projection.   Strike features a black coated epoxy.

    Sargent Part #649

    649
    $107.88
  26. Sargent Exit Device Strike 655

    Sargent Exit Device Strike 655

    This is the Sargent Bottom Strike for there Surface Vertical Rod Devices. Strike measures 1-13/16" x 2-3/4" x 3/32" thick. 

    Sargent Part #655

    G655
    $45.35
  27. Von Duprin Strike 1409

    Von Duprin Strike 1409

    This Von Duprin Strike is used for the bottom latch of the 22, 33, 33A, 55, 88 and 99 Rim Devices.  Also known as a Blade Stop.

    1409
    $153.38
  28. Von Duprin Strike 1609

    Von Duprin Strike 1609

    This strike is used when we have a double door application without a center post. By using this strike we can have one door with a surface vertical rod and one door a rim device, which will save money because vertical rods are usually expensive. This strike can be used with the Von Duprin 22/2227, 88/8827, 98/9827 and 99/9927 combinations, but not with the Fire Rated Versions. The strike base measures 1-1/16" wide by 3-1/4" high, the lip projects out 7/8". The three slots are 1-1/4" on center. This strike ships with the mounting screws.

    US19-Black finish

    1609
    $99.41
  29. Von Duprin Strike 248L-4

    Von Duprin Strike 248L-4

    The Von Duprin 248L-4 Strike is used as a Bottom Strike on the 2227, 8827, 9927, and 9827 Surface Vertical Rod Panic Devices. The 248L-4 strike measures 9/16" wide by 2-1/2" high with a hole spacing of 1-7/8. The strike projects out 3/8".

    Ships with shim and mounting screws

    Von Duprin Strike 248L-4

    Burnished steel construction

    248L-4
    $59.65
  30. Von Duprin Strike 264

    Von Duprin Strike 264

    This strike measures 2-7/8" tall by 1-1/4" wide with a roller projection of 9/16". Used on the Von Duprin 22, 88, 98 and 99 when a lower profile strike is need in place of the Von Duprin 299 Strike. The hole spacing is 2-1/8" on center, and it ships with mounting screws and a shim. Also known as a Von Duprin Surface Roller Strike.

    264
    $102.55
  31. Von Duprin Strike 299

    Von Duprin Rim Strike 299

    The Von Duprin 299 Strike is used on the 22, 88, 98, and 99 Rim Devices and also as a Top Strike on the 2227, 8827, 9927, and 9827 Surface Vertical Rod Panic Devices. The 299 strike measures 1-1/4" wide by 2-7/8" high with a slotted hole spacing of 2-1/8". The roller projects out 13/16".

    Ships with shim and mounting screws

    299
    $62.81
View as Grid List

Items 1-36 of 54

per page
Set Descending Direction
Page