Sanymetal

You can take a pause if you were exploring the internet to find Sanymetal partition parts. You have stumbled upon the best web page for ordering Sanymetal partition parts for restroom stalls.

We are respected Sanymetal partition parts suppliers at Robert Brooke & Associates. RBA has been around for over 50 years. Throughout that time, our devoted workers have gained the necessary skills to accommodate our customers with the finest products and outstanding service.

Our vast knowledge of the partitions industry has enabled us to pinpoint reputable partitions brands. When we discovered Sanymetal, Inc., we were overjoyed at the thought of selling their Sanymetal stall parts. So of course, we soon began supplying Sanymetal partition parts to our customers online.

About The Sanymetal Parts Brand

Sanymetal, Inc. manufactures Sanymental stalls and Sanymetal stall hardware. They were founded over a century ago and have been making remarkable strides in manufacturing superb Sanymetal partition hardware ever since.

Our company sells Sanymetal toilet partition hardware because we have grown to trust the quality of the brand and its products. At Robert Brooke & Associates, we have become familiar with and come to love the way that Sanymetal, Inc. manufactures their Sanymetal stall parts.

Our Selection Of Sanymetal Stall Parts

Directly below is a short but descriptive list of some of the Sanymetal partition parts we carry. You will find more Sanymetal hardware by scrolling through the rest of this page.

The Sanymetal Door Stop is made with a black rubber insert. The packaging of this item will include a set of installation screws. 

There is also the Sanymetal Toggle & Screw set. This Sanymetal partition hardware is to be used with surface mounted hinges. 

Or consider the Sanymetal Top Hinge Casting. This Sanymetal partition parts appears on the top corner of partition doors. This particular Sanymetal partition hardware is meant to be used on stall doors that are made of metal.

We also have plenty of Sanymetal keepers available. You’ll have to decide which model of Sanymetal keeper will work best with your bathroom stalls. Choose from the Sanymetal Keeper For Throw Latch Inswing Flat, the Sanymetal Keeper with 2 inches in between screws, their Strike and Keeper Inswing 1 to ¼ inches, their Keeper Bumper Concealed for round-edge posts or their Keeper Bumper Concealed for square-edge posts. 

Don’t stop there! Key in a search query on our website’s Search Bar to locate your Sanymetal parts. Learn more about select Sanymetal stall hardware in the RBA Partitions and Hardware Catalog.

Send Us Sanymetal Partition Parts Inquiries

Forward your Sanymetal partition parts questions to Sales@RobertBrooke.com so that one of our associates can respond in a short time. We will get back to you promptly with the requested info on Sanymetal partition hardware. You will be headed toward newly enhanced bathroom partitions before you know it.

We will make ordering Sanymetal partition hardware for bathroom partitions a stress-free undertaking. Count on the talented crew at RBA to get you the Sany Metal parts that will sharpen the appearance and improve the performance of your bathroom partitions.

View as Grid List

23 Items

per page
Set Descending Direction
  1. Sanymetal Keeper Bumper Concealed

    Sanymetal Toilet Partition Keeper Bumper For Concealed Latches 1-1/4" Round Edge Post

    Polished chrome plate Zamac die casting construction. Strike and Keeper measures 1-1/4" high by 2-3/8" wide by 1-3/4" deep. Stop is 1/2" thick and projects out 1-1/8". The latching slot is 7/16" deep x 3/4" high. This Bathroom Toilet Door Keeper is designed for use on 1-1/4" thick round edge posts or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5510.

    Shipped with mounting screws.

    9S8801
    $7.40
  2. Sanymetal Keeper Bumper For Concealed Latches Inswing/Outswing

    Sanymetal Partitions Keeper Bumper And Strike For Concealed Latches Inswing/Outswing 1-1/4"

    Zamac die cast and polished chrome plate construction. Keeper is 1-1/4" tall by 2-3/8" wide by 1-3/4" deep. The strike is a1/2" thick and the slot is 7/16" deep. The opening to mount it on the pilaster or post is 1-1/4" by 1-1/4" This Strike and Keeper are for square post or pilasters. Also known as a Bathroom Stall Strike and Keeper for Inswing/Outswing 1-1/4". Manufacture part # 5960

    Shipped with screws for mounting.

    9S8861
    $7.08
  3. Sanymetal Coat Hook Bumper

    Sanymetal Coat Hook Bumper 3" Projection

    Chrome plated Zamac die cast construction. The coat hook base measures 2" by 1-11/16" with a 1-1/8" hole spacing. The hook projects out 1-13/16". The bumper projects out 3" with a rubber insert on the tip. Also known as a Bathroom Stall Hook. Manufacture part # 4280.

    Shipped with mounting screws.

    9S7810
    $6.33
  4. Chrome Plated Ada Throw Latch 3-1/2" Screws

    Chrome Plated Partition Ada Throw Latch 3-1/2" Between Screws Latch Only

    Chrome plated brass construction. Base is 4-1/2" wide by 1-1/2" high by 3/16" thick. Throw latch is 3-11/16" long by 3/4" x 3/16" thick. The latch projects from the stall door 1-3/8". Also known as a Bathroom Stall or Toilet Partiton Throw Latch. Manufacture part # 5151

    Shipped with mounting screws.

    9S7531
    $28.46
  5. Chrome Plated Slide Bolt Latch 9/16" Bar To Door Clearance

    Chrome Plated Slide Bolt Latch 9/16" Bar To Door Clearance

    Zamac die cast construction with polished chrome plating. Base is 3-3/8" high with 2-5/8" hole spacing. Latch bolt is 3-1/8" long by 7/8" wide by 3/16" thick with a 9/16" dimension from the door to the under side of the latch bolt. The latch projects out 1-1/2" when installed on the door. Also known as a Bathroom Toilet Stall Door Slide Latch and Toilet Partition Locks. Manufacture part # 6540.

    Shipped with mounting screws.

    9S7431
    $12.65
  6. Sanymetal Coat Hook Bumper

    Sanymetal Partitions Coat Hook Bumper

    Chrome plated Zamac die casting construction. Coat hook bumper projects out 3" and has a rubber insert. The hook projects out 1-7/32". The coat hook bumper base is 1-7/16" wide by 2-1/4" high with a hole spacing of 7/8". Also known as a Bathroom Stall Hook. Manufacture part # 4000.

    9S6810B
    $3.07
  7. Chrome Plated Ada Throw Latch & Keeper

    Chrome Plated Heavy Duty Partition Ada Throw Latch And Keeper

    Polished chrome plated brass construction. Latch base is 2" x 2" and is 3/16" thick. The throw latch is 5-7/16" long by 1-1/4" by 7/32" thick. The keeper is 2" by 2" by 21-32" high. Meets ADA codes in most States. Also known as a Bathroom Stall Heavy Duty ADA Throw Latch and Keeper and Toilet Partition Locks. Manufacture part # 5701.

    Shipped with mounting screws.

    9S5701
    $44.85
  8. Inswing Keeper For Throw Ltc For 1-1/4" Sq Post

    Inswing Partition Keeper Bumper For Throw Latch For 1-1/4" Sq Post

    Zamac die cast and polished chrome plate construction. The strike and keeper measure 2-1/2" high by 1-7/8" wide with a hole spacing of 1-1/2" on center. The stop is 2-1/2" tall by 3/4" wide with a rubber insert. The slot measures 13/16" high by 1/4" deep. Commonly known as a Bathrrom Stall Strike and Keeper Inswing 1-1/4". Manufacture part # 5340

    Shipped with mounting screws.

    9S410T
    $8.67
  9. Sanymetal Door Stop

    Sanymetal Partitions Door Stop For Inswing/Outswing Flat

    Polished chrome plated Zamac construction. The strike and keeper measure 2-1/2" high by 1-7/8" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing Flat. Manufacture part # 5170.

    Shipped with mounting screws.

    9S2704
    $5.69
  10. Keeper For Throw Latch

    Toilet Partition Keeper For Throw Latch Inswing Flat

    Polished chrome plated Zamac construction. Keeper base is 2-1/2" high by 1-3/16" wide with a 1-1/2" hole spacing. Strike is 2-1/2" tall by 7/8" deep. The material 1/8" thick. The slot is 13/16" high by 1/4". Also known as a Bathroom Stall Keeper Inswing Flat. Manufacture part # 5180.

    Shipped with mounting screws.

    9S2701
    $5.12
  11. Chrome Plated Flat Stop Keeper

    Chrome Plated Toilet Partition Flat Stop Keeper

    Polished chrome plated Zamac construction. The keeper base is 2-1/2" tall by 1-3/32" wide. The latch face measures 2-1/2" tall with a 7/8" projection. The hole spacing is 1-1/2". The slot measures 5/16" by 1-9/16". Also known as a Bathroom Stall Keeper-Inswing Flat. Manufacture part # 5160.

    Shipped with mounting screws.

    9S2401J
    $6.07
  12. Sanymetal Keeper 2 Between Screws

    Sanymetal Partition Keeper 2" Between Screws Inswing Flat


    Polished chrome plated Zamac construction. Keeper base is 3" high by 1-1/16" wide with a 2" hole spacing. Strike is 3" tall by 7/8" deep. The material 1/8" thick. The slot is 1-1/8" high by 1/4". Also known as a Bathroom Stall Keeper Inswing Flat. Manufacture part # 5130.

    Shipped with mounting screws.

    9S2401
    $12.65
View as Grid List

23 Items

per page
Set Descending Direction