Plexiglass & Brackets
Robert Brooke & Associates has been selling Commercial brackets for more than 40 years. We focus on providing the parts you may need to get your project done and offering a wide variety of hardware.
Plexiglass Shield Barriers
Plexiglass Shield Barriers are designed to create separation/social distance between individuals. Plexiglass sheets are being utilized as table top dividers and counter top barriers in schools, hospitals, restaurants and businesses to help protect individuals. These panels are ¼” thick Clear Plexiglass. Panels DO NOT come with hardware but is available separately. Feel Free to contact us with any questions you may have.
Available Sizes
- 24"Hx24"W
- 24"Hx30"W
- 24"Hx36"W
- 24"Hx42"W
- 24"Hx48"W
- 24"Hx60"W
Brackets
When implementing social distancing in a facility, these brackets can be used to hold plexiglass/acrylic sheets in place. The brackets will support thickness of sheet between 1/8”-3/8” material. These brackets are Sold in Pairs and are available in 3 designs to help create spacing. We offer 2 finishes (Silver and Black) to these powder coated die cast brackets. Hardware will require a Phillips head screw driver and a 3/16” (5mm) Allen key. The brackets are designed for mounting a top of desk/table surface. Since they are being installed with screws, this make the brackets a more permanent install as opposed to a temporary mount.
Desk Top Brackets
These brackets will mount a dividing sheet to a desk/table surface. This will provide needed separation in the workplace There will be minimum gap under the sheet to increase separation.
Edge Mount Brackets
The edge mount bracket is typically mounted near the edge of a surface to minimize footprint. This will allow for a large bottom gap to pass paper work underneath. Great for restaurants and businesses that work with customers and paperwork being passed back and forth. Can be utilized on larger or smaller surfaces.
Dual Desk Brackets
Dual desk brackets are typically utilized on larger surfaces where 2 individuals share the same work space. This allows for installation in the center of desk/table top to give parties ample space to work. Gap under dividing sheets allows paperwork to be passed while still providing separation and social distancing.
-
Plexiglass Barrier Shields
Plexiglass Barrier Shields designed to create separation/social distance between individuals. Plexiglass sheets are being utilized as table top dividers and counter top barriers in schools, hospitals, restaurants and businesses to help protect individuals. These panels are ¼” thick Clear Plexiglass. Can be used in a variety of different way to create barriers. Panels DO NOT come with hardware but is available separately. Lead time is typically shipped out within 1 week but may vary depending on quantities and sizes being ordered. Panels 36” or smaller will ship ground, while panels larger than 36” will potentially ship freight. Feel Free to contact us with any questions you may have.
Available Sizes
- 24"Hx24"W **Ships Ground
- 24"Hx30"W **Ships Ground
- 24"Hx36"W **Ships Ground
- 24"Hx42"W **Ships LTL Freight
- 24"Hx48"W **Ships LTL Freight
- 24"Hx60"W **Ships LTL Freight
TER-052 -
Dual Desk Mount Plexiglass Brackets
Brackets designed to mount plexiglass/acrylic sheets to desk surface edge when creating separation/barrier. Brackets are adjustable for thickness from 1/8" to 3/8". It is recommended for use of 1/4" Thick material. Sold as a Pair. Made of Aluminum Alloy. Screws and inserts included. Uses a 5mm/3/16" Allen Key(Not Included) to install screws These are available in either Silver or Black Finish. Silver Finish are readily available while Black Finish may have an extended leadtime depending on quantities being ordered.
Measurements
Height: 2-1/2"
Width: 1-3/4"
Depth: 5/8"
Weight:About 1.3lb
Top to Bottom: 3-5/8"
Plate Width: 1-3/4"
Plate Length: 5-3/4"
Plate Height: 3/16"
Gap/Spacing: 1"
PRM-DDB -
Edge Mount Plexiglass Brackets
Brackets designed to mount plexiglass/acrylic sheets to desk surface edge when creating separation/barrier. Brackets are adjustable for thickness from 1/8" to 3/8". It is recommended for use of 1/4" Thick material. Sold as a Pair. Made of Aluminum Alloy. Screws and inserts included. Uses a 5mm/3/16" Allen Key(Not Included) to install screws These are available in either Silver or Black Finish. Silver Finish are readily available while Black Finish may have an extended leadtime depending on quantities being ordered.
Measurements
Height: 2-1/2"
Width: 1-3/4"
Depth: 5/8"
Weight:About .9lb
Top to Bottom: 3-5/8"
Plate Width: 1-3/4"
Plate Length: 3"
Plate Height: 3/16"
Gap/Spacing: 1"
PRM-EMB -
Desk Top Plexiglass Brackets
Brackets designed to mount plexiglass/acrylic sheets to desk top or work surface when creating separation/barrier. Brackets are adjustable for thickness from 1/8" to 3/8". It is recommended for use of 1/4" Thick material. Sold as a Pair. Made of Aluminum Alloy. Screws and inserts included. Uses a 5mm/3/16" Allen Key(Not Included) to install screws These are available in either Silver or Black Finish. Silver Finish are readily available while Black Finish may have an extended leadtime depending on quantities being ordered.
Measurements
Height: 2-1/2"
Width:1-3/4"
Depth: 5/8"
Weight:About .6lb
PRM-DTB -
Stall Stash Clear Acrylic
Stall stash is a plexiglass restroom partition attachment that protects phones, purses, and belongings at stalls, urinals. The sanitary conditions of restrooms are more important than ever. Stall Stash improves the safety and comfort of restroom visits by eliminating the concerns of water damaged devices, forgotten or stolen property, and most importantly, exposure to germs and bacteria. For 7/8" door or 1" doors. Measures 18-3/16" x 7" x 5-1/2"
9a99