Aluminum
All brackets are in stock for fast delivery. For extra strength we recommend full length aluminum channels or stainless steel continuous channels. Replacing old hardware with new will change your bathroom's to looking new again. All Partition brackets will come with security screws. U brackets are used for pilaster to panel that create a T to connect. F brackets are used at the end panel on the back wall and two ear bracket are for mid bracket panels at the back wall.
RBA Partitions and Parts Catalog
-
Aluminum 2 Piece Wall Bracket Kit
Aluminum 2 piece wall bracket kit typically used with toilet partition panels, but have various other uses. The overall length of the brackets are 2-1/2" x 1-1/2" x 1-1/2". The holes are 1/4" diameter. This item also know as 1864. All hardware included with brackets and note these are 2 piece L brackets.
9A1864 -
Aluminum Bracket 'U' 1" Panel, 1-1/2" x 1-3/8" L
Toilet Partition Aluminum Bracket 'U' For 1" Thick Panel
Constructed of extruded anodized aluminum. The base measures 1-5/16" wide by 1-1/2" tall. The screw holes on the base are 5/8" on center. The legs project out 1-5/16". The bracket is also known as a Bathroom Stall U Bracket, Wall Bracket or Toilet Partiton U Bracket. The manufacturers part numbers is 1914. Shipped with mounting screws.
9A1914 -
Aluminum Bracket U 1" Panel, 3" H x 1-3/8"
Toilet Partition Wall Bracket 'U' For 1" Panel, 3"H x 1-3/8"L
Extruded aluminum construction. The base is 3" long x 1-5/16" wide. The legs project out 1-3/8" and are 1" apart, for use with 1" panels. The six mounting holes are 1/4" diameter. Also known as a Bathroom Stall U Wall Bracket Extra Long. Manufactures part number is 2304. Shipped with all the fasteners.
9A2304 -
Aluminum Bracket One Ear 1 1/4" Panel, 3" H X 2-3/4" L
Toilet Partition Wall Bracket One Ear For 1-1/4" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 3" high by 2-5/8" wide with the mounting holes 1-3/8" on center. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The 8 holes are 1/4" diameter. All wall thicknesses are 1/8". This bracket is sometimes known as a Bathroom Stall One Ear Wall Bracket, or Toilet Partition One Ear Wall Bracket. The manufacturers part number is 2294 and 650-1851. This bracket ships with all the needed fasteners.9A2294 -
Aluminum Bracket One Ear 1" Panel 1-1/2" X 2-3/4" L
Toilet Partition Bracket One Ear For 1" Panel Aluminum
Constructed of extruded anodized aluminum. The base is 1-1/2" high by 2-5/8" wide, with mounting holes 1-3/8" on center. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs are 1" apart, and is designed for 1" thick panels. This bracket is also known as a One Ear Wall Bracket, One Wing Wall Bracket, Toilet Partition One Ear Bracket, or Bathroom Stall One Ear Bracket. The manufacturers part number is 1764. The bracket ships with all the required fasteners.
9A1764 -
Aluminum Bracket One Ear 1" Panel 3" H X 2-3/4" L
Toilet Partition Wall Bracket One Ear For 1" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 3" high by 2-5/8" wide with the mounting holes 1-3/8" on center. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The 8 holes are 1/4" diameter. All wall thicknesses are 1/8". This bracket is sometimes known as a Bathroom Stall One Ear Wall Bracket, or Toilet Partition One Ear Wall Bracket. The manufacturers part number is 2274 and 650-1848. This bracket ships with all the needed fasteners.
9A2274 -
Aluminum Bracket One Ear 1-1/4" Panel, 1-1/2" - 2-3/4" L
Toilet Partition Bracket One Ear For 1-1/4" Panel Aluminum
Constructed of extruded anodized aluminum. The base is 2-5/8" wide x 1-1/2" high, with the two mounting screws 1-3/8" on center. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The distance between the legs is 1-1/4". It is designed for 1-1/4" thick panels. The 4 screw holes are 1/4" diameter. This bracket is also known as a One Ear Wall Bracket, 1844 One Ear Wall Bracket, Toilet Partitoin One Ear Bracket, or Bathroom Stall One Ear Bracket. The bracket is shipped with all the mounting screws.
9A1844 -
Aluminum Bracket One Ear 3/4" Panel 1-1/2" X 2-3/4"
Toilet Partition Bracket One Ear For 3/4" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 1-1/2" x 2-5/8", with 1-3/8" hole spacing. 2-3/4" projection on the legs. Legs are 3/4" apart, and is designed for 3/4" thick panels. Also known as a Bathroom Stall One Ear Wall Bracket or One Wing Wall Bracket. The manufacturers part numbers are 1644, 650-2852, and 650-2858. Shipped with all the fasteners.
9A1644 -
Aluminum Bracket Two Ear 1" Panel 1-1/2" x 2-3/4"
Toilet Partition Bracket Two Ear For 1" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 1-1/2" high by 3-3/4" wide, with mounting screws at 2-3/4" on center. Legs project out at 2-3/4" with the thru hole at 2-1/2" for the back of the base. The legs are 1" apart. Also known as a Bathroom Stall Two Ear Wall Bracket and Toilet Partition Two Wing Wall Bracket. The manufacturers part numbers are 1754, 650-1839, and 40-8445210. Bracket is shipped with all the fasteners.
9A1754 -
Aluminum Bracket Two Ear For 1" Panel, 3" H X 2-3/4" L
Toilet Partition Bracket Two Ear For 1" Thick Panel Aluminum
Constructed of extruded anodized aluminum. Base is 3" high by 3-3/4" wide with the mounting holes 2-3/4" on center. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The 8 holes are 1/4" diameter. All wall thicknesses are 1/8". This bracket is sometimes known as a Bathroom Stall Two Ear Wall Bracket, or Toilet Partition Two Ear Wall Bracket. The manufacturers part number is 2264 and 650-1839. This bracket ships with all the needed fasteners.
9A2264 -
Aluminum Continuous "H" Bracket For 1" X 1" X 54",1" Panel To 1"
Toilet Partition Continuous "H" (Alcove) Bracket For 1" Thick Panels Aluminum
Constructed of extruded anodized aluminum. Channel is 2-1/2" high by 1+" wide by 54" long, for use with 1" panels. Thru holes are 1-1/2" on center. Holes are 1/4" diameter. Thru holes are every 13" or so. Sometimes known as Bathroom Stall Continuous Alcove Bracket or Toilet Partiton Alcove Bracket. The manufacturers part numbers are 2858, and 650-1862-54. These brackets are shipped with all the needed fasteners.
9A2858 -
Aluminum Continuous 'L' Bracket 2-3/4" X 57-1/2"
Toilet Partition Continuous 'L' Wall Bracket 2-3/4" X 57-1/2" Aluminum
Extruded aluminum construction. Base is 1-3/8" and the leg projects out 2-3/4". These are sold individually. It is also known as a Bathroom Stall Continuous L Wall Bracket. The manufacturers part # is 2684.
9A2684 -
Aluminum Continuous One Ear Bracket 1" Panel, 2-3/4" X 54"
Toilet Partition Continuous One Ear Wall Bracket For 1" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 2-5/8" wide by 54" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1" for 1" thick panels. Sometimes known as Bathroom Stall Continuous One Ear Wall Bracket. The manufacturers part numbers are 2878, and 650-9750-54. These brackets are shipped with all the needed fasteners.
9A2878 -
Aluminum Continuous One Ear Bracket 3/4" Panel, 2-1/2" X 57-1/2"
Toilet Partition Continuous One Ear Wall Bracket For 1" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 2-5/8" wide by 57-1/2" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 3/4" for 3/4" thick panels. Sometimes known as Bathroom Stall Continuous One Ear Wall Bracket. The manufacturers part numbers are 650-4031. These brackets are shipped with all the needed fasteners.
9A4364 -
Aluminum Continuous One Ear Bracket, 1 1/4" X 2-3/4" x 57-1/2"
Toilet Partition Continuous One Ear Wall Bracket For 1 1/4" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 2-5/8" wide by 57-1/2" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1-1/4" for 1-1/4" thick panels. Sometimes known as Bathroom Stall Continuous One Ear Wall Bracket. The manufacturers part numbers are 2354, and 650-9186-57. These brackets are shipped with all the needed fasteners.
9A0184C -
Aluminum Continuous One Ear Bracket, 1" X2-3/4"X 57-1/2"
Partition Continuous One Ear Wall Bracket For 1"Panel Aluminum
Constructed of extruded anodized aluminum. Base is 2-5/8" wide by 57-1/2" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1" for 1" thick panels. Sometimes known as Bathroom Stall Continuous One Ear Wall Bracket. The manufacturers part numbers are 2334, one ear 1" x 57, and 650-9750-58. These brackets are shipped with all the needed fasteners.
9A0176C -
Aluminum Continuous Two Ear Bracket 1" Panel, 2-1/2" X 41"
Toilet Partition Continuous Two Ear Wall Bracket For 1" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 3-3/4" wide by 41" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1" for 1" thick panels. Sometimes known as Bathroom Stall Continuous Two Ear Wall Bracket. The manufacturers part numbers are 2888, and 650-8531-41. These brackets are shipped with all the needed fasteners.9A2888 -
Aluminum Continuous Two Ear Bracket 1" Panel, 2-1/2" X 54"
Toilet Partition Continuous Two Ear Wall Bracket For 1" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 3-3/4" wide by 54" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1" for 1" thick panels. Sometimes known as Bathroom Stall Continuous Two Ear Wall Bracket. The manufacturers part numbers are 2868, and 650-8531-54. These brackets are shipped with all the needed fasteners.
9A2868 -
Aluminum Continuous Two Ear Bracket 1" X 2-1/2" X 57-1/2"
Toilet Partition Continuous Two Ear Wall Bracket For 1"Panel Aluminum
Constructed of extruded anodized aluminum. Base is 3-3/4" wide by 57-1/2" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1" for 1" thick panels. Sometimes known as Bathroom Stall Continuous Two Ear Wall Bracket. The manufacturers part numbers are 2344, and 650-4029. These brackets are shipped with all the needed fasteners.
9A0175C -
Aluminum Continuous U Bracket 1" X 1-3/8" X 54"
Toilet Partition Continuous U Bracket For 1" Thick Panels Aluminum
Constructed of extruded anodized aluminum. Base is 1-5/16" wide by 54" long, with screw holes every 13" or so. The legs project out 1-3/8" with the thru hole at 1" from the back of the base. The legs have a clearance of 1" for 1" thick panels. Sometimes known as Bathroom Stall Continuous U Bracket. The manufacturers part numbers are 2794, 650-1968, 650-1968-54 and U Channel 1 x 54. These brackets are shipped with all the needed fasteners.
9A2794 -
Aluminum Continuous U Bracket 1" X 1-3/8" X 57-1/2"
Toilet Partition Continuous U Wall Bracket For 1" Thick Panels Aluminum
Constructed of extruded anodized aluminum. Base is 1-5/16" wide by 57-1/2" long, with screw holes every 13" or so. The legs project out 1-3/8" with the thru hole at 1" from the back of the base. The legs have a clearance of 1" for 1" thick panels. Sometimes known as Bathroom Stall Continuous U Wall Bracket. The manufacturers part numbers are 2364, 650-1968-58, and U Channel 1 x 57. These brackets are shipped with all the needed fasteners.9A0191C -
Floor Shoe 1-3/4" X 1-3/4" Sq Post
Toilet Partition Pilaster Floor Shoe 1-3/4" X 1-3/4" Square Post
Constructed of zamac die cast material, then polished chrome plated. Base is 2-5/32" x 3-7/8", with 3" on center hole spacing. Floor shoe projects up 2" and has a 1/4-20 treaded hole. Also known as a Bathroom Stall Pilaster Post Shoe, or Toilet Partition Pilaster Post Shoe. Manufacture part # 3040 and 40-8512510. Shipped with all the fasteners.
9A0304 -
Floor Shoe 1-1/4" X 1-1/4" Sq Post
Toilet Partition Floor Shoe For 1-1/4" X 1-1/4" Square Post
Constructed of zamac die cast material, then polished chrome plated. Base is 1-21-32" x 3-3/8", with 2-1/2" on center hole spacing. Floor shoe projects up 2" and has a 1/4-20 treaded hole. Also known as a Bathroom Stall Pilaster Post Shoe, or Toilet Partition Pilaster Post Shoe. Manufacture part # 3030. Shipped with all the fasteners.
9A1763 -
Aluminum Continuous One Ear Bracket 1/2" Panel, 2-1/2" X 57-1/2"
Aluminum One Ear Bracket 1/2" Panel, 2-1/2" X 57-1/2". Constructed of extruded anodized aluminum. Base is 2-5/8" wide by 57-1/2" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1/2" for 1/2" thick panels. Sometimes known as Toilet Stall Continuous One Ear Wall Bracket. The manufacturers part numbers are 2094. These brackets are shipped with all the needed fasteners.
9A2094 -
Aluminum Continuous Two Ear Bracket 1/2" X 2-1/2" X 57-1/2"
Aluminum Continuous Two Ear Bracket 1/2" X 2-1/2" X 57-1/2". Constructed of extruded anodized aluminum. Base is 3-3/4" wide by 57-1/2" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1/2" for 1/2" thick panels. Sometimes known as Bathroom Stall Continuous Two Ear Wall Bracket. The manufacturers part numbers are 2674. These brackets are shipped with all the needed fasteners.
9A2674 -
Aluminum Continuous Two Ear Bracket 1/2" Panel, 2-1/2" X 41"
Aluminum Continuous Two Ear Bracket 1/2" Panel, 2-1/2" X 41". Constructed of extruded anodized aluminum. Base is 3-3/4" wide by 41" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1/2" for 1/2" thick panels. Sometimes known as Bathroom Stall Continuous Two Ear Wall Bracket. The manufacturers part numbers are 2054. These brackets are shipped with all the needed fasteners.
9A2054$60.72 As low as $60.00 -
Aluminum U Shape Bracket 1/2" X 1-3/8" X 57"
Aluminum U Shape Bracket 1/2" X 1-3/8" X 57". Constructed of extruded anodized aluminum. Base is 3/4 wide by 57" long, with screw holes every 13" or so. They have a clearance of 1/2" for 1/2" thick panels. Sometimes known as Bathroom Stall Continuous U Bracket. The manufacturers part numbers are 2664. These brackets are shipped with all the needed fasteners.
9A2924
