Doors
-
Plunger Type Holder / Stop FS1154
As low as $86.11Ives Plunger Type Holder FS1154
Features:
- Constructed from heavy-duty cast brass or bronze.
- Plunger and internal parts are plated steel and provides a 1-1/4" throw for all types of doors.
- Plunger is easily activated with minimal pressure, releasing instantly with a light tap on the platform lever.
- Round non-marring rubber shoe is securely fastened with a screw in flanged cup to prevent movement or loss. When worn, shoes are easily replaced.
Ives Part # FS1154
Learn More -
Security Latch Touch Bar Double Door L400
As low as $89.12Double Door Latch -- Rests firmly against the center post. Shown with optional lock. Lock prevents theft.
Learn More
-
Security Latch Single Door Latch L420
As low as $80.37Single Right Door Latch -- Rests firmly against door jamb. Shown without optional lock. Lock prevents theft.
Learn More
-
Security Latch Single Door Latch L430
As low as $80.37Single Left Door Latch -- Rests firmly against door jamb. Shown without optional lock. Lock prevents theft.
Learn More -
Sargent Exit Device 80 Series Metal End Cap And Bracket
As low as $85.59Sargent Exit Device 80 Series Metal End Cap And Bracket
Use this end cap to replace all older versions and plastic end caps. It is much stronger then the orginals, more impact resistant.
sargent part # 565
Learn More -
Sargent Exit Device 20/30/60 End Cap And Bracket
$86.80Sargent Exit Device 20/30/60 End Cap And Bracket
Includes the end cap, bracket and screws
Used on the Sargent 20, 30 and 60 series Exit Devices
Sargent Part # 68-0434, 68-2141, and 97-0052
Learn More -
Hager 5100 Series Door Closer Hold Open Arm 5107
As low as $80.37Hager 5100 Series Door Closer Hold Open Arm 5107 Learn More -
Stainless Steel Kick Plate Brushed 14 Gauge
As low as $56.97Stainless Steel Kick Plate Brushed 14 Gauge
Brushed Stainless Steel Kick plate US32D 14 Ga (.062")
Custom sizes available starting around $0.40 per square inch depending quantity
Same appearance as brushed chromePlease allow 1 week shipping time
Ships with a Phillips type sheet metal screws
Learn More -
Aluminum Diamond .125 Plate Kick Plate
As low as $81.94Aluminum Diamond Plate Kick Plate
Aluminum base material that has a polished chrome look with the diamond plate pattern. Diamonds are 1-1/8" long.
Custom sizes are available, they run about $0.39 per square inch.125" thick
Please allow 7-10 days for delivery
Learn More -
Von Duprin 98/9947 Adjustable Top Rod
$88.99Von Duprin 98/9947 Adjustable Top Rod
Von Duprin 98/9947 Adjustable Top Rod for 6'8" to 8'4" doors. This rod is used on the 9847, 9847-F, 9947 and 9947-F
Von Dupin Part # 050574
Learn More
Old Part #110375 -
Sargent Exit Device Strike 624
$82.08Sargent Exit Device Strike 624
This is the Sargent Standard Bottom Strike for there Surface Vertical Rod Devices. Strike measures 9/16" x 2-1/2" with a 3/8" projection. Strike features a black coated epoxy.
Sargent Part #624
Learn More -
Yale Strike 793
$87.01Yale Strike 793
Used on the Yale 7100 and 2100 Series Rim Exit Devices. Optional strike for double door applications without a mullion.
Yale Part # 793
Learn More -
Von Duprin 338 Strike
$82.86The Von Duprin 338 Strike measures 1-5/8" by 1-7/8" with a 5/8" projection. The screw mounting is 1-7/8". This strike is used as a bottom strike on the Von Duprin surface and concealed vertical rod devices.
Learn More -
Von Duprin 050531 EL Dogging Rod 3'
$80.52Von Duprin 050531 EL Dogging Rod 3'
The EL Dogging Rod connects the Solenoid to the Push Bar Bracket. The 3' designates the model it is used on. The 3' model is used on doors 36" or under. The Rod measures roughly 11" long. This rod is used on the 33A, 35A, 98 and 99 Exit Devices
Von Duprin Part # 050531, Old Part # 110007
Learn More -
Von Duprin Strike 299F
$82.02Von Duprin Strike 299F
The Von Duprin 299F Strike is used on the 22, 88, 98, and 99 Fire Rated Rim Devices (no hex or cylinder dogging). The 299F strike measures 1-1/4" wide by 2-7/8" high with a slotted hole spacing of 2-1/8". The roller projects out 13/16". The non fire rated version would be the Von Duprin Strike 299.
Ships with shim and mounting screws
Learn More -
International Door Closer 855 Series
As low as $80.37International Door Closer 855 Series
FEATURES
Two Adjustment Valves: Closing and Latching speeds controlled by separate regulating Valves, Universal application Non-handed for standard top jamb or parallel arm installation.Ships with regular arm and parallel arm bracket.
3/4" x 9-1/16" mounting holes
Learn More -
International Door Closer 1804BC - Fixed Spring Closer
As low as $84.75INTERNATIONAL DOOR CLOSER 1804BC - FIXED SPRING CLOSER
- Factory tested to meet or exceed ANSI 156.4 Grade 1
- Narrow design permits installation on most modern glass and aluminum doors without adapters
- Two Adjustment Valves: Closing and Latching speeds controlled by separate regulating valves, adjustable after installation.
- Standard application for regular arm, Top Jamb installation and Parallel arm installation.
- Slim Plastic Cover or Full Cover (optional)
- Ranges of Sizes
Back-Check: 1802, 1803, 1804, and 1805 - 5 year warranty
- All Weather Fluid
3/4" X 9-1/16" Hole Spacing
PLACE AN ORDER HERE FOR THE 1804BC-P
Learn More -
International Door Closer 883 Series
As low as $80.37International Door Closer 883 Series
FEATURESThree Adjustment Valves: Closing and Latching
speeds controlled by separate regulating Valves,
and back check
Universal application Non-handed for standard top
jamb or parallel arm installation.Direct replacement for the older style Norton 1602 and 1603, and Yale 52 and 53
3/4" x 8-3/16" mounting holes
Learn More -
International Door Closer 884 Series
As low as $80.37International Door Closer 884 Series
FEATURES
Three Adjustment Valves: Closing and Latching
and back checkspeeds controlled by separate regulating Valves,
Universal application Non-handed for standard top
jamb or parallel arm installation.3/4" x 9-1/16" mounting holes
-
International Door Closer 885 Series
As low as $80.37International Door Closer 885 Series
FEATURES
Three Adjustment Valves: Closing and Latching and back check. Speeds controlled by separate regulating Valves,
Universal application Non-handed for standard top jamb or parallel arm installation.3/4" x 9-1/16" mounting holes
-
International Door Closer 784 Series
As low as $84.34The International Door Closer 784 Series was discontinued about 10 years ago, but we still have some stock left.
FEATURES
Three Adjustment Valves: Closing and Latching
and back checkspeeds controlled by separate regulating Valves,
Universal application Non-handed for standard top
jamb or parallel arm installation.3/4" x 8-3/16" mounting holes
-
Dorma Rim Device Strike 463
$83.58The Dorma Rim Device Strike 463 is used on the 8300, 8300F, 9300 and 9300F exit devices. Mounting screws included.
Learn More