Stops / Holders
Door Stops / Holders
Selling door stops / holders for Glynn Johnson, Ives, Burns Manufacturing,
Rixson, International Door Closer, and Grand Specialties for the
past 40 years.
Make sure you click the Text or Image of the Door Stop / Holder
for more information, including the finishes and dimensional information.
-
4" Kickdown Door Holder / Stop Grand Standard
As low as $10.624" Kickdown Door Holder / Stop Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American MadeMade by Grand Specialties
Zinc plated steel or Brass plated
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
Learn More -
Universal Dome Floor Stop FS439
As low as $12.20The Ives Universal Dome Floor Stop FS439 is constructed of cast zinc or stainless steel, depending on the finish. The stop measures 1-1/2" high, with a base height of 1/4" and base diameter of 1-7/8". The pad has a height of 1-1/8" from the floor.
Ives Part Number FS439
Learn More -
Decorative Floor Stop FS410
As low as $31.48The Ives Decorative Floor Stop FS410 is constructed of cast brass. It measures 1-1/2" high with a 1-1/4" diameter. Manufacture part FS410 x Finish.
Learn More -
5" Kickdown Door Holder / Stop Grand Standard
As low as $11.745" Kickdown Door Holder / Stop Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American Made
Zinc plated steel or Brass platedmade by Grand Specialties 605z 605b
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
Learn More -
6" Kickdown Door Holder / Stop Grand Standard
As low as $12.036" Kickdown Door Holder / Stop Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American Made
Zinc plated steel or Brass platedMade by Grand Specialties 606z and 606br
The 606BR is no longer manufacturedAnother feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
Learn More -
8" Kickdown Door Holder / Stops Grand Standard
$12.98 As low as $9.748" Kickdown Door Holder / Stops Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American Made
Zinc plated steelMade by Grand Specialties 608z
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
Learn More -
10" Kickdown Door Holder / Stop Grand Standard
$14.28 As low as $10.7110" Kickdown Door Holder / Stop Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American Made
Zinc plated steelmade by Grand Specialties 610z
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
Learn More -
12" Kickdown Door Holder / Stop Grand Standard
$15.34 As low as $11.5112" Kickdown Door Holder / Stop Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American Made
Zinc plated steelAnother feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
Made by Grand Specialties 612z
Learn More -
3" Kickdown Door Holder / Stop Zinc Plated Mickey
$10.663" Kickdown Door Holder / Stop Zinc Plated Mickey
Zinc plated cold rolled steel,
Made in the USA
3" Arm Lengthmade by Grand Specialties
Learn More -
4" Kickdown Door Holder / Stop Brass Deluxe
$9.85 As low as $8.874" Kickdown Door Holder / Stop Brass Deluxe
Popular priced crafted holder for interior doors.
Has 1/2" adjustment and replaceable steel re-inforced
shoe for long life. Made of steel with brass plated finish.Made by Grand Specialties
Learn More -
4" Kickdown Door Holder / Stop FS452
As low as $37.134" Kickdown Door Holder / Stop FS452
Features:
- Units provide simple hold and release, activated with a touch of the foot.
- Cast brass or aluminum construction.
- Stainless steel spring.
- Non-marring rubber shoes have corrugated bottoms to provide secure grip.
- Shoes are easily replaced when worn.
- FS452-4 has a door-to-floor clearance of 2" or less.
- Packed with sheet metal screws.
-
4" Kickdown Door Holder / Stop FS455
As low as $11.224" Kickdown Door Holder / Stop FS455
Features:
- Units provide simple hold and release, activated with a touch of the foot.
- Cast brass or aluminum construction.
- Non-marring rubber shoes have corrugated bottoms to provide secure grip and a shank which forms its own thread when screwed into threaded cavity of holder.
- When worn, shoes are easily replaced.
- Door-to-floor clearances of 2" or less.
Made by H.B. Ives
Learn More -
4 inch Kickdown Door Holder / Stop FS544
As low as $12.384" Kickdown Door Holder / Stop FS544
This is one of our most popular Kickdown Door Holder/Stop for the past 35 years.
Features:
- Units provide an economical method to hold open doors.
- Cast of durable iron.
- Non-marring rubber shoes have corrugated bottoms to provide secure grip. Rubber shoe is securely fastened with screw. When worn, shoes are easily replaced.
- FS544 for door-to-floor clearances of 2" or less.
-
5" Kickdown Door Holder / Stop FS452
As low as $39.365" Kickdown Door Holder / Stop FS452
Features:
- Units provide simple hold and release, activated with a touch of the foot.
- Cast brass or aluminum construction.
- Stainless steel spring.
- Non-marring rubber shoes have corrugated bottoms to provide secure grip.
- Shoes are easily replaced when worn.
- FS452-5 has a door-to-floor clearance up to 3".
- Packed with sheet metal screws.
Ives Part # FS452
Learn More -
5 inch Kickdown Door Holder / Stop FS555
As low as $13.485" Kickdown Door Holder / Stop FS555
Features:
- Units provide an economical method to hold open doors.
- Cast of durable iron.
- Non-marring rubber shoes have corrugated bottoms to provide secure grip. Rubber shoe is securely fastened with screw. When worn, shoes are easily replaced.
- FS555 for door-to-floor clearances up to 3".
Made by H.B. Ives
Learn More -
Aluminum Flush Bolt FB-1202
As low as $17.54Aluminum Store Front Door Flush Bolt FB-1202
15/16" x 4-1/4" radius face, 5-7/32" hole spacing, 1/8" offset, 5/8" throw, 12" rod length, with a square nylon tip with beveled corners fits in a 1/2" square hole.
Learn More -
Automatic Floor Type Holder and Stop
As low as $51.15Automatic Floor Type Holder and Stop
Cast brass construction, and then chrome plated. Measures 3-11/16" high by 3" wide with a 1-15/16" projection. The strike is 1-3/16" high. Spring loaded brass roller, rolls over the the strike to lock the door in the open position. To release, just give the door a tug.
Learn More -
Crash Chain Door Stop CS115
As low as $55.29Crash Chain Door Stop CS115
- Specially designed for full-size exterior doors.
- Tear resistant, grey vinyl cover.
- Heavy duty compression spring assembled to both ends of chain
and end brackets. - Packed with sheet metal screws.
- Cast Brass brackets with solid, welded steel chain.
Available in 20-1/2", 25-1/2" and 30-1/2" lengths. Length is determined
by the location of your door closerPART # LENGTH
Learn More
GCC205 20-1/2"
GCC255 25-1/2"
GCC305 30-1/2" -
Dome Door Stop 1" Height 522
$16.39Material: Forged Brass with Gray Rubber Bumper Size: 1-11/16" × 4" x 5/16" Base x 1" High Finishes: US26D-Brushed Chrome Finish Only
Notes: Traditional slipper low dome design Standard Fasteners: Supplied with wood screws and machine screws with anchors -
Dome Door Stop 1" Height FS436
As low as $6.18Ives Dome Door Stop 1" Height FS436
Features:
- For doors without threshold.
- Heavy-Duty Cast Dome Stops constructed of brass, bronze or aluminum.
- Gray, non-marring rubber bumper.
Overall hgt 1"
Learn More
Base Hgt 3/16"
Base Diameter 1-3/4" x 2" Oval -
Dome Door Stop 1-1/4" Height 523
$22.29Material: Cast Brass with Gray Rubber Bumper Size: 2" × 4" x 1/2" Base x 1-1/4" High Finishes: US26D-brushed chrome finish only
Notes: Traditional slipper high dome design Standard Fasteners: Supplied with wood screws and machine screws with anchors -
Dome Door Stop 1-5/8" Height 521
$10.45Dome Door Stop 1-5/8" Height 521
Forged brass construction with a gray rubber bumper. 1-3/4" diameter x 1-5/8" High x 1/4" Base thickness, US26D-Brushed Chrome finish only.
Learn More
Supplied with wood screws and machine screws with anchors -
Floor Mounted Door Holder / Stop FS446
As low as $42.28Ives Floor Mounted Door Holder FS446
Features:
- Manual type floor holder ideal for interior or exterior use.
- Cast brass or aluminum construction.
- Accommodates door undercut up to 2-1/2".
- Non-marring rubber tip.
- Unit functions as a stop but serves as a Hold-Open device when hook is manually engaged instrike. Unit requires manual disengagement to release Hold-Open.
- Packed with expansion shield and lead shield.
Overall Height 3-3/4"
Learn More
Height to Stop Center Line 2-5/8"
Diameter 2-1/2"
-
Floor Mounted Door Holder/Stop 536
As low as $36.42Material: Cast Brass or Bronze with Black Bumper Size: 2-1/2" diameter Base x 3-7/8" High Finishes: US4 brushed brass
US10B dark bronze
US26 polished chrome
US26D brushed chrome
US3 polished brassANSI: L01371 Standard Fasteners: (1) lead anchor
(2) #10 × 1" SMS
(1) #10 × 1" SMS with plastic anchor
(1) 5/16-18 × 2-1/2" stud
(1) 5/16-18 × 2-1/2" hanger bolt -
Floor Mounted Door Holder/Stop FS40
As low as $63.42Ives Floor Mounted Door Holder FS40
This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF40A or F40A, and was brought over to the H.B. Ives line in the 1990's. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.
Door to Floor Clearance 1/2" or less
Learn More
Holder Dimensions 3" Wide x 3-11/16" High