Stops / Holders
Door Stops / Holders
Selling door stops / holders for Glynn Johnson, Ives, Burns Manufacturing,
Rixson, International Door Closer, and Grand Specialties for the
past 40 years.
Make sure you click the Text or Image of the Door Stop / Holder
for more information, including the finishes and dimensional information.
-
4" Kickdown Door Holder / Stop Grand Standard
As low as $10.624" Kickdown Door Holder / Stop Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American MadeMade by Grand Specialties
Zinc plated steel or Brass plated
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
Learn More -
Gravity Door Coordinator 9 Inch
$112.21 As low as $55.00Gravity Door Coordinator 9"
When active door is open, coordinator prevents active door from closing until inactive door bypasses. Closing of inactive door causes strike plate on top of door to contact cam and lift arm, allowing active door to close. As inactive door continues closing, roller rides over strike plate on to door bracket, holding arm above active door.
Non-handed.
Gravity action arm and door bracket are adjustable on the job for ease of installation. Rubber roller provides quiet and efficient operation, and helps protect the astragal and doors from damage. Nylon roller on short arm glides smoothly over door bracket and strike, ensuring silent operation. Made of forged brass.
COR9G-26D for use on pairs of doors with astragal on active door over 4' or with astragal on inactive door over 3'4" or with astragal on both doors over 2'10" Brushed Chrome Finish.Ives part # COR9G-26D 9" Arm Projection
Learn More -
Universal Dome Floor Stop FS439
As low as $12.20The Ives Universal Dome Floor Stop FS439 is constructed of cast zinc or stainless steel, depending on the finish. The stop measures 1-1/2" high, with a base height of 1/4" and base diameter of 1-7/8". The pad has a height of 1-1/8" from the floor.
Ives Part Number FS439
Learn More -
Decorative Floor Stop FS410
As low as $31.48The Ives Decorative Floor Stop FS410 is constructed of cast brass. It measures 1-1/2" high with a 1-1/4" diameter. Manufacture part FS410 x Finish.
Learn More -
5" Kickdown Door Holder / Stop Grand Standard
As low as $11.745" Kickdown Door Holder / Stop Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American Made
Zinc plated steel or Brass platedmade by Grand Specialties 605z 605b
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
Learn More -
6" Kickdown Door Holder / Stop Grand Standard
As low as $12.036" Kickdown Door Holder / Stop Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American Made
Zinc plated steel or Brass platedMade by Grand Specialties 606z and 606br
The 606BR is no longer manufacturedAnother feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
Learn More -
8" Kickdown Door Holder / Stops Grand Standard
$12.98 As low as $9.748" Kickdown Door Holder / Stops Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American Made
Zinc plated steelMade by Grand Specialties 608z
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
Learn More -
10" Kickdown Door Holder / Stop Grand Standard
$14.28 As low as $10.7110" Kickdown Door Holder / Stop Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American Made
Zinc plated steelmade by Grand Specialties 610z
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
Learn More -
12" Kickdown Door Holder / Stop Grand Standard
$15.34 As low as $11.5112" Kickdown Door Holder / Stop Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American Made
Zinc plated steelAnother feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
Made by Grand Specialties 612z
Learn More -
3" Kickdown Door Holder / Stop Zinc Plated Mickey
$10.663" Kickdown Door Holder / Stop Zinc Plated Mickey
Zinc plated cold rolled steel,
Made in the USA
3" Arm Lengthmade by Grand Specialties
Learn More -
4" Kickdown Door Holder / Stop Brass Deluxe
$9.85 As low as $8.874" Kickdown Door Holder / Stop Brass Deluxe
Popular priced crafted holder for interior doors.
Has 1/2" adjustment and replaceable steel re-inforced
shoe for long life. Made of steel with brass plated finish.Made by Grand Specialties
Learn More -
4" Kickdown Door Holder / Stop FS452
As low as $37.134" Kickdown Door Holder / Stop FS452
Features:
- Units provide simple hold and release, activated with a touch of the foot.
- Cast brass or aluminum construction.
- Stainless steel spring.
- Non-marring rubber shoes have corrugated bottoms to provide secure grip.
- Shoes are easily replaced when worn.
- FS452-4 has a door-to-floor clearance of 2" or less.
- Packed with sheet metal screws.
-
4" Kickdown Door Holder / Stop FS455
As low as $11.224" Kickdown Door Holder / Stop FS455
Features:
- Units provide simple hold and release, activated with a touch of the foot.
- Cast brass or aluminum construction.
- Non-marring rubber shoes have corrugated bottoms to provide secure grip and a shank which forms its own thread when screwed into threaded cavity of holder.
- When worn, shoes are easily replaced.
- Door-to-floor clearances of 2" or less.
Made by H.B. Ives
Learn More -
4 inch Kickdown Door Holder / Stop FS544
As low as $12.384" Kickdown Door Holder / Stop FS544
This is one of our most popular Kickdown Door Holder/Stop for the past 35 years.
Features:
- Units provide an economical method to hold open doors.
- Cast of durable iron.
- Non-marring rubber shoes have corrugated bottoms to provide secure grip. Rubber shoe is securely fastened with screw. When worn, shoes are easily replaced.
- FS544 for door-to-floor clearances of 2" or less.
-
5" Kickdown Door Holder / Stop FS452
As low as $39.365" Kickdown Door Holder / Stop FS452
Features:
- Units provide simple hold and release, activated with a touch of the foot.
- Cast brass or aluminum construction.
- Stainless steel spring.
- Non-marring rubber shoes have corrugated bottoms to provide secure grip.
- Shoes are easily replaced when worn.
- FS452-5 has a door-to-floor clearance up to 3".
- Packed with sheet metal screws.
Ives Part # FS452
Learn More -
5 inch Kickdown Door Holder / Stop FS555
As low as $13.485" Kickdown Door Holder / Stop FS555
Features:
- Units provide an economical method to hold open doors.
- Cast of durable iron.
- Non-marring rubber shoes have corrugated bottoms to provide secure grip. Rubber shoe is securely fastened with screw. When worn, shoes are easily replaced.
- FS555 for door-to-floor clearances up to 3".
Made by H.B. Ives
Learn More -
Aluminum Flush Bolt FB-1202
As low as $17.54Aluminum Store Front Door Flush Bolt FB-1202
15/16" x 4-1/4" radius face, 5-7/32" hole spacing, 1/8" offset, 5/8" throw, 12" rod length, with a square nylon tip with beveled corners fits in a 1/2" square hole.
Learn More -
Metal Door Automatic Flush Bolts FB31P
As low as $195.14Metal Door Automatic Flush Bolts FB31P
Fully automatic-inactive door is latched, bolts are extended when active door closes, door is unlatched, bolts retract when active door is opened. The Ives FB31P Body is 1” wide by 6-3/4” long and 2” deep. Bolt throw is 3/4” with a 7/8” adjustment with a 3/4” backset, standard rod is 12” which is measured from the center of latch body to the bolt tip.
Rods are also available in 18”, 24” and 36”, call for pricing. We ship the 12” rods, and this set would include the top and bottom latches.
3 Hour UL Listed
Ives Part # FB31P
Learn More -
Wood Door Constant Latching Flush Bolt FB61P
As low as $179.70Wood Door Constant Latching Flush Bolt FB61P
The Ives FB61P is used on the inactive leaf of wood fire doors. The latch remains extend until the active door is opened. When the active door is opened the latches retract, and extend when the active door is closed. The bodies measure 1” wide by 8-1/2” tall and 2” deep. The bolt throw is 3/4” with a 7/8” vertical adjustment, and has a 3/4” backset. This package comes with the top and bottom flush bolts with screws and strikes.
90 minute UL Rated.
Ives Part # FB61P
Learn More -
Automatic Floor Type Holder and Stop
As low as $51.15Automatic Floor Type Holder and Stop
Cast brass construction, and then chrome plated. Measures 3-11/16" high by 3" wide with a 1-15/16" projection. The strike is 1-3/16" high. Spring loaded brass roller, rolls over the the strike to lock the door in the open position. To release, just give the door a tug.
Learn More -
Crash Chain Door Stop CS115
As low as $55.29Crash Chain Door Stop CS115
- Specially designed for full-size exterior doors.
- Tear resistant, grey vinyl cover.
- Heavy duty compression spring assembled to both ends of chain
and end brackets. - Packed with sheet metal screws.
- Cast Brass brackets with solid, welded steel chain.
Available in 20-1/2", 25-1/2" and 30-1/2" lengths. Length is determined
by the location of your door closerPART # LENGTH
Learn More
GCC205 20-1/2"
GCC255 25-1/2"
GCC305 30-1/2" -
Dome Door Stop 1" Height 522
$16.39Material: Forged Brass with Gray Rubber Bumper Size: 1-11/16" × 4" x 5/16" Base x 1" High Finishes: US26D-Brushed Chrome Finish Only
Notes: Traditional slipper low dome design Standard Fasteners: Supplied with wood screws and machine screws with anchors -
Dome Door Stop 1" Height FS436
As low as $6.18Ives Dome Door Stop 1" Height FS436
Features:
- For doors without threshold.
- Heavy-Duty Cast Dome Stops constructed of brass, bronze or aluminum.
- Gray, non-marring rubber bumper.
Overall hgt 1"
Learn More
Base Hgt 3/16"
Base Diameter 1-3/4" x 2" Oval -
Dome Door Stop 1-1/4" Height 523
$22.29Material: Cast Brass with Gray Rubber Bumper Size: 2" × 4" x 1/2" Base x 1-1/4" High Finishes: US26D-brushed chrome finish only
Notes: Traditional slipper high dome design Standard Fasteners: Supplied with wood screws and machine screws with anchors -
Dome Door Stop 1-5/8" Height 521
$10.45Dome Door Stop 1-5/8" Height 521
Forged brass construction with a gray rubber bumper. 1-3/4" diameter x 1-5/8" High x 1/4" Base thickness, US26D-Brushed Chrome finish only.
Learn More
Supplied with wood screws and machine screws with anchors