Bathroom | Generic
Selling commercial bathroom partitions to the public, private businesses, builders, contractors, government, local, state, churches, YMCA, schools, local shop owners and more everyday. We are proud to work with some of the best bathroom partition manufactures in the USA. Global partitions are based in Georgia and provide some of the fastest delivered toilet partitions in the country with offering five materials that ship in forty eight hours and has a one to four day travel time. American specialties restroom accessories are a great match to complete your bathrooms. The ASI group owns ASI locker, American specialties, Global Partitions and Accurate partitions. Hadrian Partitions is located in Ohio and Arizona offer three toilet partition material types that also ship quick and can delivery to the west coast in four to five business days including travel time. This helps our west coast customers receive fast delivered partitions.
You will find everything from complete commercial restroom partition toilet stall systems or just door's, panel's, pilasters and privacy screens on our website. Accessories from Hand Dryers, Toilet Paper Holders, Paper Towel Dispensers, Fem nap Disposal units, foaming soap dispenser and more. Partition hardware is separated by manufacture for Door hardware, this is very important to know your manufacture of your partitions. All generic parts for the manufactures are typically brackets, door pulls, coat hooks, slide latches, keepers and more on our website. Bathroom partitions are not returnable, every order is made per customer. For quotes on complete toilet Partitions please send drawings to sales@robertbrooke.com.
-
Universal Handing Stainless Partition Hinge
Universal Handing Partition Hinge Stainless Steel Surface mounted. This hinge is universal which means this can be in or out swing and right or left hinged. This hinge is 1/8" thick, overall width is 3" x 3-3/8"ht. The hole spacing is 2" x 1-1/2" up and down. The manufacturer's part number is 650-8241, 7199. Hardware included for 1" door and 1-1/4" thick post.
9A8241 -
Door Kit Inswing 1" Door 1-1/4" post Cast SS
Cast Stainless steel inswing door kit for square edge doors and posts. For 1" doors and 1-1/4" post. All hardware screws included for installation of these products. All hardware is a gravity close so your door self closing every time. Also known as part number 11003.
9A11003 -
Bathroom Door Kit Outswing 7/8" Door & 1-1/4" Post Chrome
Bathroom partition chrome plated outswing door kit for square edge doors and posts. For 7/8" doors and 1-1/4" post. All hardware screws included for installation of these products. All hardware is a gravity close so your door self closing every time. Also known as part number 27810.
9A27810 -
Bathroom Door Kit Inswing 7/8" Door & 1-1/4" Post Chrome
Bathroom partition chrome plated inswing door kit for square edge doors and posts. For 7/8" doors and 1-1/4" post. All hardware screws included for installation of these products. All hardware is a gravity close so your door self closing every time. Also known as part number 17800.
9A17800 -
Stainless Steel Vault Hinge Door Kit 1" or 3/4"
Stainless Steel Vault Hinge Door Kit is designed to work with partitions that have doors and pilasters of 1" or 3/4" thickness. The Stainless Steel Vault Hinge Door Kit 1" or 3/4" is constructed of stainless steel and will support door weight of about 70 lbs. The hinges come with a black nylon insert installed to work for 3/4" thickness. If the insert is removed it will accomidate a 1" thick. Included in this kit are a set of Vault Hinges, an ADA Compliant Occupancy Indicator with built in handle and keeper latch, door stop, coat hook bumper and fasteners for installing. This door kit is design to work universally for doors whether they are inswing or outswing and left or right hand. Occupancy Indicator slide latch can be used for left or right hand installation and features Red and Green dial to show whether the stall is in use. Kit is constructed from our part numbers 9A6069, 9A7813, 9A5173, and 9A4003. This allows customers to order replacement parts should there be a need to.
9A349 -
Stainless Steel Surface Mounted Door Kit 1" or 3/4"
Stainless Steel Surface Mounted Door Kit is designed to work with partitions that have doors and pilasters of 1" thickness. It can also be used with 3/4" thickness but will require cutting down of the internal pin. The Stainless Steel Surface Mounted Door Kit 1" or 3/4" is constructed of stainless steel and will support door weight of about 70 lbs. Included in this kit are a set of Surface Mounted Hinges, an ADA Compliant Occupancy Indicator with built in handle and keeper latch, door stop, coat hook bumper and fasteners for installing. This door kit is design to work universally for doors whether they are inswing or outswing and left or right hand. Occupancy Indicator slide latch can be used for left or right hand installation and features Red and Green dial to show whether the stall is in use. Kit is constructed from our part numbers 9A6069, 9A8241, 9A5173, and 9A4003. This allows customers to order replacement parts should there be a need to.
9A341 -
Stainless Steel Occupancy Indicator Latch Handle
Occupancy Indicator Latch Handle is constructed of cast stainless steel with a satin finish. Latch handle is designed for 3/4" Doors and is through mounted to the occupancy indicator. Features a 4-1/2" length handle that is tapered at one end to engage with keeper for locking. Features emergency unlatching access on front of indicator. Shipped with fasteners for mounting occupancy indicator to door and pilaster. Known as manufacturer part number 4993.
9A4993 -
Two Ear Pilaster Bracket Kit For 1-1/4" x 1-1/2" x 2-1/2"
Toilet Partition two ear pilaster bracket kit for 1-1/4" thick material. This brackets base is 1-1/2″ wide x 4″ long with 3″ center to center hole spacing and comes out from the wall 2-1/2". The distance from the bottom of the base to the screw holes on the legs is 2-1/8″. Brackets are Included with security screws for installation. Also known as 615220.
9A615220 -
Aluminum 2 Piece Wall Bracket Kit
Aluminum 2 piece wall bracket kit typically used with toilet partition panels, but have various other uses. The overall length of the brackets are 2-1/2" x 1-1/2" x 1-1/2". The holes are 1/4" diameter. This item also know as 1864. All hardware included with brackets and note these are 2 piece L brackets.
9A1864 -
SS Piano Hinge 57" 14 Gauge,1/4" Pin 20 Degree Cam Close
Partition Door Piano Hinge 57", 14 Gauge SS,1/4" Pin with 20 Degree Cam Close. This hinge keeps the door open 20 degree so the user knows there is nobody in the restroom toilet stall. This is the most Heavy Duty Continuous Full Length Hinge we sell. 14 gauge (.075" thick) stainless steel construction with a 1/4" diameter hinge pin. The hinge leafs are angle cut so your door will close with the camming action. The hinge is 3" wide when laid flat, and 57" long. Screws are spaced 11" apart and the holes are 9/32" diameter and has 6 sets of holes. Hinge can be raised up 3/8" for emergency entry. Also known as a Restroom Toilet Stall Full Length Continuous Hinge. Manufacturer part #650-9401 and 160039. The hinges must be mounted flat when door is shut. For inside swing the hinges are mounted on the inside of the stall. For the outside they must be mounted on the outside.
9A9401 -
Stamped SS Continuous Two Ear Bracket 1/2" X 2-1/2" X 41"
Stamped SS Continuous Two Ear Bracket 1/2" X 2-1/2" X 41". 18 gauge (.05" thick) stamped stainless steel construction. Base is 3" x 41" long. Mounting holes are 2-3/8" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 13". Also known as a Bathroom Stall Two Ear or Two Wing Wall Bracket. Manufacturer part # 2059.
9A2059 -
Stamped SS Continuous 'U' Bracket 1/2" x 1-3/8" X 57"
Stamped SS Continuous 'U' Bracket 1/2" x 1-3/8" X 57". 18 gauge (.05" thick) stamped stainless steel construction. Base is 1-1/8" x 57" long. Legs project out 1-1/2" with the thru hole at 1-1/8" from the base. Mounting and thru bolts every 13" or so. Manufacturer part # 2669. Screws included with bracket.
9A2669 -
Stamped SS Continuous One Ear Bracket 1/2" x 2-1/2" X 57"
Stamped SS Continuous One Ear Bracket 1/2" x 2-1/2" X 57". 18 gauge (.05" thick) stamped stainless steel construction. Base is 2-1/2" x 57" long. Mounting holes are 1-15/32" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 13" or so. Also known as a Bathroom Stall One Ear or One Wing Wall Bracket. Manufacturer part # 2099.
9A2099 -
Stamped SS Continuous Two Ear Bracket 1/2" X 2-1/2" X 57"
Toilet Partition Continuous Two Ear Wall Bracket For 1/2" Panel X 57" Long Stamped Stainless Steel. 18 gauge (.05" thick) stamped stainless steel construction. Base is 3-11/16" x 57" long. Mounting holes are 2-15/16" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 14" or so. Also known as a Bathroom Stall Two Ear or Two Wing Wall Bracket. Manufacturer part # 2679.
9A2679 -
Aluminum Continuous Two Ear Bracket 1/2" Panel, 2-1/2" X 41"
Aluminum Continuous Two Ear Bracket 1/2" Panel, 2-1/2" X 41". Constructed of extruded anodized aluminum. Base is 3-3/4" wide by 41" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1/2" for 1/2" thick panels. Sometimes known as Bathroom Stall Continuous Two Ear Wall Bracket. The manufacturers part numbers are 2054. These brackets are shipped with all the needed fasteners.
9A2054 -
Aluminum Continuous Two Ear Bracket 1/2" X 2-1/2" X 57-1/2"
Aluminum Continuous Two Ear Bracket 1/2" X 2-1/2" X 57-1/2". Constructed of extruded anodized aluminum. Base is 3-3/4" wide by 57-1/2" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1/2" for 1/2" thick panels. Sometimes known as Bathroom Stall Continuous Two Ear Wall Bracket. The manufacturers part numbers are 2674. These brackets are shipped with all the needed fasteners.
9A2674 -
Aluminum Continuous One Ear Bracket 1/2" Panel, 2-1/2" X 57-1/2"
Aluminum One Ear Bracket 1/2" Panel, 2-1/2" X 57-1/2". Constructed of extruded anodized aluminum. Base is 2-5/8" wide by 57-1/2" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1/2" for 1/2" thick panels. Sometimes known as Toilet Stall Continuous One Ear Wall Bracket. The manufacturers part numbers are 2094. These brackets are shipped with all the needed fasteners.
9A2094 -
Aluminum U Shape Bracket 1/2" X 1-3/8" X 57"
Aluminum U Shape Bracket 1/2" X 1-3/8" X 57". Constructed of extruded anodized aluminum. Base is 3/4 wide by 57" long, with screw holes every 13" or so. They have a clearance of 1/2" for 1/2" thick panels. Sometimes known as Bathroom Stall Continuous U Bracket. The manufacturers part numbers are 2664. These brackets are shipped with all the needed fasteners.
9A2924 -
Stamped SS Continuous Two Ear Bracket 1 X 2-1/2 X 47
Toilet Partition Continuous Two Ear Wall Bracket For 1" Panel X 47" Long Stamped Stainless Steel
18 gauge (.05" thick) stamped stainless steel construction. Base is 3-11/16" x 47" long. Mounting holes are 2-15/16" center to center. Legs project out 2-1/2" with the thru hole at 2-1/8" from the base. Mounting and thru bolts every 15" or so. Also known as a Bathroom Stall Two Ear or Two Wing Wall Bracket. Manufacturer part #110409.
9A110409 -
Alcove Clip Set Chrome For Equal Panels
The Alcove clip set chrome for Equal Panels are constructed of zamac die cast metal with a polished chrome plated finish. These clips are 1-1/2" tall x 2-1/4" wide. The screws are 1-1/2" on center, with 1/4" diameter holes. Designed for joining a pilaster and panel in-line of the same thickness. This comes as a pair and is shipped with fasteners that work with partitions that are 1-1/4" thickness. Fasteners can be cut down to size to for different thicknesses. Known as manufacturer part number 8360.
9A8360 -
Continuous Stainless Steel Alcove Clip 57" for Offset Panels
Toilet Partition Stainless Steel Continuous Alcove Clip, 57, 14 Gauge, 1/8" offset.
Stainless Steel Construction 14 gauge (.075" thick). Alcove clip is 2-3/8" wide by 71" long. Holes are typically spaced every 14" vertically and 1-5/8" horizontally. This clip is also known as a Full Length Toilet Partition Continuous Clip. Alcove clip has rounded edge radius. Designed to attach pilasters and panels with different thicknesses by connecting them at the seams and eliminating sightline.
*Fasteners not Included *
Manufacture part # 9359
9A9359 -
Continuous Stainless Steel Alcove Clip 54" for Equal Panels
Toilet Partition Stainless Steel Continuous Alcove Clip, 54, 14 Gauge, equal.
Stainless Steel Construction 14 gauge (.075" thick). Alcove clip is 3" wide by 54" long. Holes are typically spaced every 13" vertically and 2-1/4" horizontally. This clip is also known as a Full Length Toilet Partition Continuous Clip. Alcove clip has rounded edge radius. Designed to attach pilasters and panels with same thicknesses by connecting them at the seams and eliminating sightline.
*Fasteners not Included *
Manufacture part # 8319
9A8319 -
Continuous Stainless Steel Alcove Clip 57" for Equal Panels
Toilet Partition Stainless Steel Continuous Alcove Clip, 57, 14 Gauge, equal.
Stainless Steel Construction 14 gauge (.075" thick). Alcove clip is 3" wide by 57" long. Holes are typically spaced every 14" vertically and 2-1/4" horizontally. This clip is also known as a Full Length Toilet Partition Continuous Clip. Alcove clip has rounded edge radius. Designed to attach pilasters and panels with same thicknesses by connecting them at the seams and eliminating sightline.
*Fasteners not Included *
Manufacture part # 111139
9A111139
