Door Trim

Fabricated from B & S 16 ga. (.050). Standard lengths are 36", 42" and 48". Custom capabilities include variations of all of the above parts including frame protectors and vertical rod protectors.
Custom sizes are available!

Screws included for mounting

Finishes

Door Pull Offset 1" Diameter PH-4000

1" Diameter Solid Aluminum Round 3-1/4" Offset Door Pull, usually used on aluminum frame glass doors. This handle offers three different mounting options, one is surface mounted, where the handle is mounted over a mounting stud and then you tighten the set screw to hold the handle in place. The second method is thru bolted, the bolt goes all the way thru the door. And the third is back to were you have two handles mounted back to back.

Projection 3 -1/4"
Door Clearance 2 -1/4"
Center To Center 9". 10' and 12"
Anodized Finishes Aluminum or Dark Brown
Mounting Hardware Included

Fabricated from B & S 16 ga. (.050). Standard lengths are 36", 42" and 48". Custom capabilities include variations of all of the above parts including frame protectors and vertical rod protectors.
Custom sizes are available!

Screws included for mounting

Finishes

Fabricated from B & S 16 ga. (.050). Standard lengths are 36", 42" and 48". Custom capabilities include variations of all of the above parts including frame protectors and vertical rod protectors.
Custom sizes are available!

Screws included for mounting

Finishes

Fabricated from B & S 16 ga. (.050). Standard lengths are 36", 42" and 48". Custom capabilities include variations of all of the above parts including frame protectors and vertical rod protectors.
Custom sizes are available!

Screws included for mounting

Finishes

Aluminum Kick Plate with Diamond Plate Finish, .063 inch thick.  Same as our 1/8 inch thick plate, but 1/16 inch thick. Plates come with or without screws, the without will not be drilled.

Reproduction based loosely on the Russwin design made popular in the 1920’s this piece features the classical dolphin and cornucopia under a strong transom arched top.

3” x 16-1/4” Plates

Available Finishes

Victorian Push Collection
Featuring 3” x 15” Plates
• Done in the Rococo style first popular in France c. 1730’s and
spreading over Europe and England during the Victorian era,
the Rococo style often embraced three dimensional mirrored
finishes, combined with a whimsical combination of shells,
flowers, ribbons and reeds.
• This classic design really comes alive in the antique finishes
including antique brass, copper and nickel.
• All BRASS Accents finishes are hand-rubbed and assembled in USA.
• Sold as complete set including matching mounting screws.
• Flat surface of plate is 2" x 9-3/4"

This is a reproduction of the Georgian Design shown in the
Phoenix Lock catalog of 1898.

3” x 12” Plates

Available Finishes

This dramatic cathedral arched rope plate, done in the Georgian style
is a reproduction of the Elsley twisted rope plate c.1880.

2-1/2" x 10-1/2" Plates

Available Finishes

The term “Palladian” comes from Andrea Palladio, a Renaissance architect whose work inspired some of the greatest buildings in Europe and the United States, most notably in the buildings designed by Thomas Jefferson, including his own home, Monticello. The classic Palladian shape is a central semicircular arch flanked on each side by strong rectangular pillasters.

3" x 12" Plates

Available Finishes

The term “Palladian” comes from Andrea Palladio, a Renaissance architect whose work inspired some of the greatest buildings in Europe and the United States, most notably in the buildings designed by Thomas Jefferson, including his own home, Monticello. The classic Palladian shape is a central semicircular arch flanked on each side by strong rectangular pillasters.

3" x 12" Plates

Available Finishes