Door Trim
Door Trim, Door Kick Plates, Door Molding, Corner Guards, Pull Plates
Make sure you click on the Image or Text for more
dimensional and pricing information.
-
Door Pull Offset 1" Diameter 39
Door Pull Offset 1" Diameter 39
This door handle is made of 1" round stock in either solid, alumunum, brass or stainless steel. It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Offset Door Handle or Door Grip, and Storefront door handle.
1" diameter material
2-3/4" projection
2-3/4" offsetGHE39 -
Door Pull Offset 3/4" Diameter 29
Door Pull Offset 3/4" Diameter 29
This door handle is made of 3/4" round stock in either solid, Aluminum, Brass or Stainless Steel. It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Door Handle or Door Grip.
3/4" diameter material
2-1/2" projection
2-1/2" offsetGHE29 -
Door Pull 26 1" Diameter
Door Pull 26 1" Diameter
This door handle is made of 1" round stock in either solid, aluminum, brass or stainless steel. It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Door Handle or Door Grip.
1" diameter material
2-3/4" projection8" GDP810
10" GDP101
12" GDP121GHE26 -
Door Pull 25 3/4 Inch Diameter
Door Pull 25 With 3/4" Diameter Handle
This door handle is made of 3/4" round stock in either solid, Aluminum, Brass or Stainless Steel. It comes standard with thru bolts and finish washers, but can be special ordered if you would like the handle mounted back to back or surface mounted. Also known as a Door Handle or Door Grip.
3/4" diameter
2-3/8" projection
1-5/8" clearance
GHE25 -
Door Pull 23
Door Pull 23
This door pull features an 8" center to center screw dimension. The handle ships with thru bolts and finish washers. Also known as a Door Handle, or Door Grip.
3/8" x 1-1/4" handle cross section
8" centers
14" overall length
1" diameter base
1-7/8" projectionGHE23- -
Door Pull 22
Door Pull 22
This door pull features an opened end and a closed end pull. This Door Pull is also known as a Door Handle or Door Grip. The handle ships with thru bolts and finish washers. The dimensions are shown below.
3/8" x 1-1/4" handle cross section
8" centers
14" overall length
1" diameter base
1-7/8" projectionGHE22- -
Door Pull 21
Door Pull 21
This handle has a cross section dimension of 1/2" x 1" and is made of half round (underside is round) stock. The handle projects out 2-1/8" with a clearance of 1-5/8". This handle is available in 6" and 8" center to center mounting holes, but can be made in different Center to Center dimensions. This product is also known as a Door Handle or Door Grip. The handle ships with thru bolts and matching finish washers.
GHE21 -
Door Pull 17
Door Pull 17
This door handle has an overall length of 10". The base diameters are 2" with three holes each. The handle projects out 2-1/4" and has a clearance of 1-1/2". Also known as a Door Grip or Door Handle. This handle ships with 6 wood/sheet metal screws.
GHE17- -
Door Pull 16
Door Pull 16
This door handle has an overall length of 7-1/2". The base diameters are 2" with three holes each. The handle projects out 2-1/4" and has a clearance of 1-1/2". Also known as a Door Grip or Door Handle. This handle ships with 6 wood/sheet metal screws.
GHE16- -
Door Pull 15
Door Pull 15
This door handle features 7-1/2" centers on the mounting screws. With 2" diameter bases. The Grip has a 2-1/4" projection with a 1-5/8" clearance. Also known as a Door Handle or Door Grip. This handle ships with thru bolts and finish washers.
GHE15- -
Door Pull 11
Door Pull 11
This door pull has 8" center to center screw spacing. The base is 3/4" diameter, the overall lenght is 9-1/4". The projection is 2-1/8" and the clearance is 1-1/2". Also known as a 8" Center Door Grip or Door Handle. This handle is shipped with thru bolts and finish washers.
GHE11- -
Door Pull 10
Door Pull 10
This door pull has 5-1/2" center to center screw spacing. The base is 3/4" diameter, the overall lenght is 6-1/4". The projection is 2" and the clearance is 1-1/2". Also known as a Door Handle or Door Grip. This handle ships with thru bolts and finish washers.
GHE10- -
Corner Guards-Clear Plastic 313 - 2-1/2" X 2-1/2" X 48"
Corner Guards-Clear Plastic 313 - 2-1/2" X 2-1/2" X 48"
.120" thick Clear polycarbonate construction with screws included for mounting. 2-1/2" legs by 48" long. Longer lengths are available, please call for pricing.
GCG313 -
Corner Guards-Clear Plastic 312 - 2" X 2" X 48"
Clear Plastic Corner Gaurds 312 - 2" X 2" X 48"
.120" thick Clear polycarbonate construction with screws included for mounting. Longer lengths are available, please call for pricing.
GCG312 -
Corner Guard 311
Fabricated from B & S 16 ga. (.050). Standard lengths are 36", 42" and 48". Custom capabilities include variations of all of the above parts including frame protectors and vertical rod protectors.
2" x 2" x 48"
Screws included for mounting
Custom sizes are available!Please allow 1 week shipping time
GCG311 -
Corner Guard 310
Corner Guard 310
Fabricated from B & S 16 ga. (.050). Standard lengths are 36", 42" and 48". Custom capabilities include variations of all of the above parts including frame protectors and vertical rod protectors.
3-1/2" x 3-1/2" x 48"
Custom sizes are available!
Screws included for mounting
Please allow 1 week shipping time
GCG310 -
Corner Guard CG-20 2" x 2"
Corner Guard CG-20 2" x 2"
90 degree 2” x 2” vinyl corner guard with aluminum retainer. Vinyl flex action absorbs impact, and is .085” thick, the aluminum retainer is .062 thick. Each corner guard includes the end caps. Available in 4, 8 and 9 foot lengths. Corner guards are shipped with a top and bottom end cap.
CG-20- -
Corner Guard CG-10 3" x 3"
Corner Guard CG-10 3" x 3"
90 degree 3” x 3” vinyl corner guard with aluminum retainer. Vinyl flex action absorbs impact, and is .100” thick, the aluminum retainer is .062 thick. Available in 4, 8 and 9 foot lengths. Top and bottom end caps included with the corner guard.
CG-10- -
Decorative Push Plate A06-P0250
This dramatic cathedral arched rope plate, done in the Georgian style
is a reproduction of the Elsley twisted rope plate c.1880.2-1/2" x 10-1/2" Plates
GA06-P0250 -
Decorative Push Plate A06-P0240
This is a reproduction of the Georgian Design shown in the
Phoenix Lock catalog of 1898.3” x 12” Plates
GA06-P0240 -
Decorative Pull Plate A04-P8601
Reproduction based loosely on the Russwin design made popular in the 1920’s this piece features the classical dolphin and cornucopia under a strong transom arched top.
3” x 16-1/4” Plates
GA04-P8601 -
Decorative Pull Plate A04-P3221
Decorative Pull Plate A04-P3221
3 x 18” Back plate, sand cast in the traditional style of the 1800’s, the design is taken from Louis XVI School of Architecture c.1774-1792 featuring the ever popular fleur de lis which for centuries had stood
as a symbol of the old French monarchy.GA04-P3221 -
Push Bar Adjustable 453
Finishes: US4/606 brushed brass
US26D/626 brushed chrome
US26/625 polished chrome
US3/605 polished brassMaterial: Brass Material Size: 1" Rd Tube Adjustable up to 36" Base: 2" Rd x 2-1/2" Clearance: 1-1/2" Projection: 2-1/2" Notes: Cast end brackets. (2) Horizontal and (1) Vertical Pull Fasteners: Option: Type 2 Surface Mount
Standard: Type 1 Thru Bolt MS453- -
Push Bar Adjustable 450
Push Bar Adjustable 450
Finishes:
US3/605 Polished brass
US4/606 Brushed brass
US10B/613 Dark bronze
US26/625 polished chrome
US26D/626 brushed chromeMaterial: Brass
Material Size: 5/8" Rd Tube Adjustable up to 36"
Clearance: 1/2"
Projection: 1-1/8"
Fasteners: Surface Mount only450- -
Push Bar 1' Diameter 422
Push Bar 1' Diameter 422
Bar is made of solid aluminum, Stainless Steel or Bronze. The bar comes with thru bolts for mountingMaterial Size 1 " round
Base 1" Round
Clearance 1-1/8"
Projection 2-1/8"Please allow 4 weeks on Aluminum, Polished Brass, and Oil Rubbed Bronze. Stainless Steel and Polished Stainless Steel take about 2 weeks.
422 -
Decorative Push Plate A04-P3220
3 x 18” Back plate, sand cast in the traditional style of the 1800’s, the design is taken from Louis XVI School of Architecture c.1774-1792 featuring the ever popular fleur de lis which for centuries had stood
as a symbol of the old French monarchy.GA04-P3220