Parts
We carry an extensive selection of exit device hardware, from retainer hubs and auxiliary kits to latch bolt springs and hex studs. Browse our online store for affordable exit device parts that you will need to install or repair your device.
Having the right exit device hardware for your device will help to ensure that your building will be secure and meet mandatory code requirements. Keeping these devices up to date with exit device replacement parts will help to further ensure building security. The exit device parts that we sell are made by top-tier manufacturers that demonstrate a standard of excellence when making their products.
We offer a variety of exit device replacement parts including dog keys, end caps, mounting base kits, surface and rim strikes, springs, screws, brackets, and so much more. Look at the manufacturer information to be sure that you are ordering the correct exit device part for your device! We encourage you to contact us if you have any questions so that you receive the appropriate exit device hardware for your device.
Our website offers a convenient way to purchase exit device parts from different manufacturers all in one place. When you shop with Robert Brooke & Associates, you can be certain that you will receive reliable, well-made, and long-lasting exit device parts with high performance rates. With our ample supply of some of the finest exit device parts on the market, you can be sure that your facility will remain safe and secure, while also providing a simple and efficient way for people to use exit doors in an emergency.
Order Your Exit Device Parts Right Here
Our selection of exit device replacement parts includes an array of options to fit your specific needs. From rim exit device parts to mortise exit device parts, we have a range of products that are designed to meet the demands of any commercial or institutional setting. Our exit device parts are made from high-quality materials and are built to withstand heavy use and abuse, ensuring that they will last for years to come.
Each brand has its own set of exit device hardware. Some of the exit device parts are interchangeable with other brand parts. Below are some examples of exit device parts that we regularly stock and sell online.
- End Caps
We stock several styles of Adams Rite end caps. We have metal end caps for this brand’s concealed vertical rod and mortise devices, plus we have metal end caps for their surface vertical rod devices which can also serve as a replacement for the plastic version. We also offer their plastic end cap. This exit device part occasionally will have the number HX0471 cast into it. We also carry their EX88 and EX89 end caps, EX76 end caps, and more! Check out our end caps from other brands, as well.
- Strikes
Another common exit device part that we carry is the strike for various devices and brands. You will want to be sure you are ordering a strike that matches up with the brand of your device. For example, the 938 Surface Strike made by Cal Royal is designed for use on the brand’s 7700 and 5000 Series rim devices.
Again, some strikes are interchangeable with strikes from other brands. This includes the Monarch/Falcon 299 Strike designed for use with the 24-R and 25-R Devices which is the exact same exit device part as the Von Duprin 299 Strike. We also stock electric strikes, dust-proof strikes, roller strikes, and more.
- Springs
We also have springs for many devices and brands. One example of this is the Sargent Lever Return Spring designed for use on the lever trims of their Sargent devices. There are also other types of springs such as the 90 Series Mouse Trap Spring designed for use with the Sargent 9898 Rim Device.
- Pins
Some devices also require another exit device part that is typically referred to as a pin. For instance, we carry the control link pin and the lever trim shear pin kit for use with Von Duprin devices. You can also find push bar pins, pivot pins, dogging pins, and more on our site for many brands.
- Keys
Keys are used for a number of device styles. We have dog keys, dogging hex keys, cotter keys, and more.
- Brackets
A bracket is another commonly used exit device part that you might need to order a replacement for over time. Many brands make devices that require some sort of bracket. Brackets come in several styles such as latch bracket, lift bracket, dogging bracket, pinion support bracket, push bar anchor bracket, mounting bracket, spring tube bracket, mullion bracket, release bracket, and more.
- Guides
You can also order guides on our website for use with specified brands. This includes top bolt guides, bottom bolt guides, rod guides, push bar guides, tailpiece guides, and more.
- Solenoids
We offer solenoids such as the Adams Rite EL8600 Solenoid 31-0833-IP which is designed for use with their Concealed Vertical Rod, the 12-volt or 24-volt Adams Rite EL8800 Solenoid, and the Von Duprin 050535 El Solenoid which is compatible with their 33A, 35A, 98, and 99 devices along with the Dor-O-Matic/Falcon EL1690, EL1790, and EL2390 devices. Browse our assortment of solenoids for more information.
That’s not all. We also offer so many more exit device parts and accessories. From cover plates and compression springs to dogging kits and trim sets, we have everything you need to ensure that your panic devices are functioning properly and are up to building code. Our exit device hardware is designed to be easy to install and use, making it a great choice for any facility.
Contact Our Team of Experts at Robert Brooke & Associates with your Exit Device Part Questions!
At Robert Brooke & Associates, we are committed to providing our customers with the highest level of service and support. Our team of experts is always available to answer any questions you may have and to help you find the right products for your needs. We also offer fast and reliable shipping, so you can get the products you need when you need them.
So if you are looking for well-built, unyielding exit device hardware, look no further than Robert Brooke & Associates. With our wide selection of products and our commitment to customer satisfaction, we are the go-to source for all your exit device part needs.
-
Corbin Russwin ED5400 Exit Device
Corbin Russwin ED5400 Exit Device
Handing
Device is handed but easily field reversible.
Lever trim is handed.
Bar Length
Easily field cut to size.
Standard: 36" (914mm) bar fits 30"- 36" door.
Door Thickness
1-3/4" (44mm) standard.
Stile
Minimum width 4-1/2" (114mm).
Door Height
Standard top rod for 7' door.Replacement parts are also available
ED5400 -
Von Duprin Mullion Stabilizer Package
The Von Duprin Mullion Stabilizer Package are used with Von Duprin Mullions to stop any deflection on the mullion, which may cause the exit devices to release. We run into issues where people are able to shake the door, and the door opens. The package includes two sets of stabilizers and all the mounting screws.
G154- -
Von Duprin 100316 5547 Top Plate
The Von Duprin 100316 is used on the 5547 on the top of the door. The top rod goes through the square hole on the plate. The plate shown in the Picture has both sides or LHR and RHR doors. One side of the strike is usually broken off depending on the hand of the door.
G100316 -
Von Duprin 2670 Guard-X Exit Device
Heavy Duty Design
The new Series 2670 Exit Alarm Lock provides secure protection through a large stainless steel deadbolt, which is 2" x 1/2" (51mm x 13mm) and has over a 3/4" (19mm) throw. The engagement area into the strike is over 1 1/4" (32mm) square inches. The cast aluminum latch case protects the internal mechanism and resists tampering or vandalism from inside the door. This unit has been tested to withstand up to 1600 pounds of static load force against the door.Fits 36" to 48" doors.
Uses 9 volt battery
Ships with all mounting hardware and strike.2670EO- -
Von Duprin Electric Strike 6111 24VDC
Von Duprin Electric Strike 6111 24VDC
Von Duprin 6100 Series electric strikes are designed for use with Rim devices. The model 6111 retrofits model number VD 3031, and measures 1-5/8” wide, 6” high and has a backbox depth of 1-3/4”. Other voltages and replacement parts are available.
FSE - Fail-secure. Requires power to be applied to unlock the strike lip. On loss of power, the strike lip is locked-Fire Rated
FS - Fail-safe. Requires power to be applied to lock the strike lip. On loss of power, the strike lip is unlocked. Non Fire-Rated.
VD6111 -
Von Duprin Electric Strike 6112 24VDC
Von Duprin Electric Strike 6112 24VDC
Von Duprin 6100 Series electric strikes are designed for use with Rim devices. The 6112 has a 3/4” latch bolt throw, 9” face plate length, 1-5/8” width, and an 1-3/4” backbone depth. The lock retrofits the Folger Adams FA 310-4. Other voltages and replacement parts are available.
FSE - Fail-secure. Requires power to be applied to unlock the strike lip. On loss of power, the strike lip is locked-Fire Rated
FS - Fail-safe. Requires power to be applied to lock the strike lip. On loss of power, the strike lip is unlocked. Non Fire-Rated.
VD6112 -
Von Duprin Electric Strike 6113 24VDC
Von Duprin Electric Strike 6113 24VDC
Von Duprin 6100 Series electric strikes are designed for use with Rim devices. The 6113 has a 3/4” latch bolt throw, 6” face plate length, 1-5/8” width, and an 1-15/16” backbone depth. The lock retrofits the VD 3011 and VD 3021. Other voltages and replacement parts are available.
FSE - Fail-secure. Requires power to be applied to unlock the strike lip. On loss of power, the strike lip is locked-Fire Rated
FS - Fail-safe. Requires power to be applied to lock the strike lip. On loss of power, the strike lip is unlocked. Non Fire-Rated.
VD6113 -
Von Duprin Electric Strike 6114 24VDC
Von Duprin Electric Strike 6114 24VDC
Von Duprin 6100 Series electric strikes are designed for use with Rim devices. The 6114 has a 3/4” latch bolt throw, 7” face plate length, 1-7/8” width, and projects1-9/16”. The lock retrofits the Folger Adams FD 310-5. Other voltages and replacement parts are available.
FSE - Fail-secure. Requires power to be applied to unlock the strike lip. On loss of power, the strike lip is locked-Fire Rated
FS - Fail-safe. Requires power to be applied to lock the strike lip. On loss of power, the strike lip is unlocked. Non Fire-Rated.
VD6114 -
-
Von Duprin 99 Exit Device Only
The Von Duprin 99 rim exit devices for all types of single and double doors with mullion, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. The Von Duprin 98 device has a smooth mechanism case and the Von Duprin 99 device has a grooved case. The rim device is non-handed.
Ships with all the mounting screws and the 299 Strike.
99EO -
Von Duprin 9975 Exit Only
Von Duprin 9875/9975 mortise lock device for all types of single or double doors, UL listed for Panic Exit Hardware. Devices are ANSI A156.3 – 2001 Grade 1. Fits stock hollow metal doors with 86 cutout and door stiles as narrow as 4-3/4" (121mm). The Von Duprin 9875 device has a smooth mechanism case and the Von Duprin 9975 device has a grooved case. The mortise lock device is non-handed
9975EO -
Dust Proof Strike DP1
- Designed for use with the bottom bolt of all flush bolts.
- Spring-loaded plunger returns to floor or threshold level anytime
flush bolt is retracted, eliminating need to clean standard
floor strikes. - Strike hole is 3/4" Diameter and 1-1/8" Deep
DP1 Face Plate: 1-7/16" Diameter
Body: 1-3/16" Diameter x 1-7/8" DeepDP1-
