Doors| Adams Rite Exit Devices

Filter
View as Grid List

Items 1-36 of 37

per page
Set Descending Direction
Page
  1. Adams Rite 8200 Exit Device

    Grade 1 Exit Device
    Device is non handed
    Standard sizes are 30", 36", 42" or 48"
    Minimum stile width is 2"

    Replacement parts are also available

    AR8200-
    As low as $855.06
  2. Adams Rite 8700 Exit Device

    Grade 1 exit device
    Device is non handed
    Standard widths are 30", 36", 42" or 48"
    3-3/4" minimum stile width

    Replacement parts are also available

    AR8700-
    As low as $448.22
  3. Exit Device Dog Key 1/8"

    1/8" Dog (hex) Key, used on Adams Rite and Cal Royal Panic Devices

    1/8" Hex Key

    1-13/16" ovall all length

    also known as Hex Key, Dog Key, Allen Key, Dogging Key

    88R6018
    $4.48
  4. Jack Nut 1/4-20

    Jack Nut 1/4-20

    The Jack Nut is used on hollow metal doors to fasten door closers, door closer arms, exit devices and continuous hinges.

    GMH124
    $1.93
  5. Jack Nut 10-24

    Jack Nut 10-24

    The Jack Nut is used on hollow metal doors to fasten door closers, door closer arms, exit devices and continuous hinges.

    GMH102
    $1.93
  6. Adams Rite Exit Device Dog Key

    Adams Rite Exit Device Dog Key

    Adams Rite dog key, used on older Adams Rite Exit Devices.

    Plastic Construction

    Adams Rite part # 25-0480

    also known as Hex Key, Dog Key, Allen Key, Dogging Key

    Adams Rite dog key, used on older Adams Rite Exit Devices.

    Plastic Construction

    Adams Rite part # 25-0480

    88R60AR
    $2.69
  7. Adams Rite End Cap

    Adams Rite End Cap

    On this Adams Rite End Cap we sometimes find the number HX0471 cast into the Black Plastic construction.

    Adams Rite Part # 25-0471

    G250471
    $16.40
  8. Adams Rite 8300/8600 End Cap Old Style

    Adams Rite old Style end cap for the 8300 and 8600, with dogging in the head. Plastic Cap measures 2-5/16" high x 1-1/16" wide with a 1-1/4" projection.

    Adams Rite Part # 41-0801-01

    G41080101
    $52.17
  9. Adams Rite 8700/8800 End Cap Old Style

    Adams Rite old Style end cap for the 8700 and 8800. Dogging in the head.
    The black cap measures 2-3/8" high x 1-5/8" wide x 1-1/4" projection

    Adams Rite Part # 41-0801-08

    G41080108
    $52.17
  10. Adams Rite CVR/Mortise Metal End Cap

    Metal end cap for all Adams Rite Concealed Vertical Rod and Mortise devices.

    Adam Rite Part # 41-0902-05IP

    G41090205IP
    $41.73
  11. Adams Rite Old Style Dogging Pin

    Adams Rite Old Style Dogging Pin

    This Adams Rite part is a replacement for worn or stripped dogging pins. The older style pins were an 1/8" allen head hex. The replacement is 5/32".

    Adams Rite part # 24-0730

    G240730
    $14.91
  12. Adams Rite 8700/8800 End Cap New Style

    Adams Rite New Style end cap for the 8700 and 8800.
    The black cap measures 2-3/8" high x 1-1/2" wide x 1-1/4" projection. We some times find the number 25-0674-01 cast in the black plastic.

    Adams Rite Part # 41-0901-03-IP

    G41090103
    $26.83
  13. Adams Rite CVR/Mortise Metal End Cap

    Plastic end cap for all Adams Rite Concealed Vertical Rod and Mortise devices.

    Plastic cap measures 2-3/8" high by 1-1/16" wide by 1-1/4" projection. The metal tab measures 1-3/16" wide by 5" long.

    Adam Rite Part # 41-0901-05-IP

    G41090105
    $25.34
  14. Adams Rite 8800 Exit Device

    Adams Rite 8800 Exit Device

    The 8800 features the Starwheel locking bolt that interlocks door to the door frame.  This device is used exclusively on aluminum framed glass storefront doors.  If your door is 35" wide, then you would order the 36" device.  We want to make sure they device is wide enough to span the glass on the storefront doors.  Replacement parts are available.

    8800EO-
    As low as $447.09
  15. Adams Rite 8800 Mounting Base Kit

    Adams Rite 8700 / 8800 Mounting Base Kit

    Replacement active head for the Adams Rite 8800 and Adams Rite 8700 Star Wheel Latching System.   Kit includes replacement rivets to reattach.

    Adams Rite Part # 91-8800

    G918800
    $171.39
  16. Adams Rite 8800EL Electrified Exit Device

    The Adams Rite 8800EL Exit Device is the Electric Latch Retraction version of the 8800.  We see this used with many card readers, especially in Hotel/Motel applications.

    The 8800 features the Starwheel locking bolt that interlocks door to the door frame.  This device is used exclusively on aluminum framed glass storefront doors.  If your door is 35" wide, then you would order the 36" device.  We want to make sure they device is wide enough to span the glass on the storefront doors.  Replacement parts are available.

    To order specify your door width, color and voltage of the solenoid.

    8800EL
    As low as $860.66
  17. Adams Rite 3700/8700/8800 End Cap New Style

    Adams Rite New Style Metal End Cap for the 3700, 8700 and 8800.
    The black cap measures 2-3/8" high x 1-1/2" wide x 1-1/4" projection.  Newer metal end cap will replace the old plastic ones.

    Adams Rite Part # 41-0902-03-IP

    G41090203
    $34.06
  18. Adams Rite 8700/8800 Strike

    Adams Rite 22-0430-IP 8700/8800 Strike is used on the rim devices that have the Star Wheel Latching System.  The strike measures 2-3/4" long by 1-3/4" wide and projects out approximately 3/8".

    G8800STK
    $14.91
  19. Adams Rite 8700/8800 Strike 91-0993-IP

    Adams Rite 91-0993-IP 8700/8800 Strike is used on the rim devices that have the Star Wheel Latching System.  The strike measures 2-3/4" long by 1-3/4" wide and projects out approximately 1/2".   Kit comes with mounting screws and two shims.

    G910993
    $29.80
  20. Adams Rite 8600 Solenoid 31-0833-IP

    The Adams Rite EL8600 Solenoid 31-0833-IP is used on their Concealed Vertical Rod.  It uses 28 VDC.  If your Solenoid is Red or White, then you would need the EL8800 Solenoid.  

    G310833ip
    $235.57
  21. Adams Rite Latch Retraction Circuit Board

    The Adams Rite Latch Retraction (LR) Ciruit Board is used on devices sold after 2004.  The board measures 1-3/4 inches by 2-3/4 inches.

    G310117IP
    $185.09
  22. Adams Rite G86 End Cap

    The Adams Rite G86 Mounting Cap and Label with only work on the G86 Device.  The Cap measures 3-3/4" high by 1-1/8" with a 1-5/8" projection.

     

    G310932G86
    $23.55
  23. Adams Rite 8200 Metal End Cap Assembly

    Adams Rite 41-0902-04-IP Metal End Cap Assembly is used on the 3100, 8100, and 8200 which are their Surface Vertical Rod devices.  Replaces the 41-0901-04, which is the plastic version.  We find the number 23-0601 cast into the cap.

    Adams Rite part # 41-0902-04-IP

    G41090204
    $32.78
  24. Adams Rite Metal End Cap

    The Adams Rite Metal End Cap is for the hinge side of the door and replaces the plastic version (25-0471).  This cap can be used on the 3100, 3300, 3600, 3700, 3900, 8100, 8200, 8300, 8400, 8500, 8600, 8700, 8800 and 8900.  We find the number 23-0600 cast in to the end cap.

    Adams Rite Part Number 41-0903-IP or 41-0903-119

    G410903
    $27.57
  25. Adams Rite EX88 and EX89 End Caps

    The Adams Rite EX88 and EX89 End Caps are for the EX Series Interlocking and Pullman Rim Devices.  The package includes the hinge side and latching side covers, along with the mounting screws.

    G91011902-
    As low as $74.45
  26. Adams Rite EX76 End Caps

    The Adams Rite EX76 End Caps are for the Concealed Vertical Rod Devices. The package includes the hinge side and latching side covers, along with the mounting screws.

    screws.

    G91011901-
    As low as $74.45
  27. Adams Rite RX Monitor Single Switch

    Adams Rite RX Monitor Single Switch is a retrofit kit for all the 3000/8000 exit devices.  The switch has 3 wires to connect to your system.

    Adams Rite Part # 91-0897-01

    G91089701
    $143.07
  28. Adams Rite RX Monitor Dual Switch

    Adams Rite RX Monitor Dual Switch is a retrofit kit for all the 3000/8000 exit devices.  The switch has 6 wires to connect to your system.

    Adams Rite Part # 91-0897-02

    G91089702
    $193.75
  29. Adams Rite 8600 Concealed Vertical Rod

    The Adams Rite 8600 Concealed Vertical Rod is designed for narrow stile aluminum framed glass doors.  The device will fit on stile widths of 2" or more.   We recommend this device for replacement only, modifying your existing door to this exit device will be labor intensive.  The 8611 would be for the aluminum finish and the 8622 would be or the dark bronze finish.  We try to keep the Aluminum and Dark Bronze in stock in the 36" and 48" devices.

    This device is not Electrified, please call for the Electrified Model.

    8600-
    As low as $611.03
  30. Adams Rite 8600 Electric Latch Retraction Concealed Vertical Rod

    The Adams Rite 8600EL Electric latch Retraction Concealed Vertical Rod is designed for narrow stile aluminum framed glass doors.  The device will fit on stile widths of 2" or more.   The EL version We recommend this device for replacement or upgrading your current 8600 to Latch Retraction, modifying your existing door to this exit device will be labor intensive.  The 8611EL would be for the aluminum finish and the 8622EL would be or the dark bronze finish.  

    This device is Electrified, please see the 8600 for the non Electric Device.

    8600EL
    As low as $1,006.74
  31. Adams Rite EX88 Rim Exit Device

    The Adams Rite EX88 Interlocking Rim Exit Device is designed for heavy duty use on narrow stile aluminium door applications. The EX88 has a unique latch bolt design that interlocks with the frame of the door. This device is non handed, requires a minimum stile width of 2" and will work on aluminum, hollow metal or wood doors.The device is constructed of extruded aluminum with matching metal angled end caps. To order specify your door width, and the color.

    EX88-
    As low as $485.84
  32. Adams Rite EL8800 Solenoid

    The Adams Rite EL8800 Solenoid is the mechanism that retracts, or in this case turns the wheel to unlock the panic device.  There are two versions one for 12 volt systems 31-0735-IP, and the 24 volt system 31-0736-IP. The 12 Volt Solenoid is wrapped in red tape, the 24 volt is wrapped in white tape.

     

    G31073X
    As low as $245.90
View as Grid List

Items 1-36 of 37

per page
Set Descending Direction
Page