Doors| International Door Closer
-
Door Pull Offset 1" Diameter PH-4000
Door Pull Offset 1" Diameter PH-4000
1" Diameter Solid Aluminum Round 3-1/4" Offset Door Pull, usually used on aluminum frame glass doors. This handle offers three different mounting options, one is surface mounted, where the handle is mounted over a mounting stud and then you tighten the set screw to hold the handle in place. The second method is thru bolted, the bolt goes all the way thru the door. And the third is back to were you have two handles mounted back to back.
Projection 3 -1/4"
Door Clearance 2 -1/4"
Center To Center 9". 10' and 12"
Anodized Finishes Aluminum or Dark Brown
Mounting Hardware IncludedPH-4000- -
-
Intermediate Hinge IP-2202 and IP-2201
Intermediate Hinge IP-2202 and IP-2201
Cast aluminum construction with steel bearings and axle. The set measures 3-1/2" tall with an 1-3/8" projection. This hinge is usually used an an intermediate hinge in between the top and bottom hinge.
Manufacture part # IP-2202 and IP-2201
IP-2202 is for Right Hand Doors
IP-2201 is for Left Hand DoorsGIP2201- -
Intermediate Hinge IP-1901 and IP-1902
Intermediate Hinge IP-1901 and IP-1902
Cast aluminum construction with steel bearings. The hinge measures 5" high by 2-1/2" wide. This hinge has a 3/4" offset. We find this hinge in the middle section of the door between the top and bottom hinges. Available in the Aluminum color and Dark Brown. See the dimensional information under more views.
Manufacture Part # IP-1901 and IP-1902
IP-1901 is for Left Hand Doors
IP-1902 is for Right Hand DoorsGIP1901- -
International 53K01 Lever Trim
International 53K01 Lever Trim
The International 53K01 Lever Trim is for the 5000 Series International Door Closer exit device. The rose diameter is 3-3/8", with a lever length of 4", and the projection is 3". Available in Aluminum or Dark Bronze colors. Available in Classroom and Storeroom functions. Classroom function the key locks and unlocks the Lever Handle, if you turn the key one way it is only unlocked for that one passage, if you turn the key the other way, the Lever is unlocked until it is locked again. Storeroom/Night Latch function the Lever is always locked.
53K01- -
International Door Closer 300 Series Adjustable Power
International Door Closer 300 Series Adjustable Power
UL Listed, Barrier Free Operation to Comply with Federal Accessibility Standards (ADA) ANSI A117.1. Spring Power adjustable for a range of sizes from 8-1/2 lbs t Medium Spring Tension, fully adjustable after installation.
Hydraulic Cylinder only
3000-B-310 105 with Hold Open
3000-B-311 105 with No Hold Open
3000-B-312 90 with Hold Open
3000-B-313 90 with No Hold Open3000-B -
International Door Closer 853 Series
International Door Closer 853 Series
FEATURESTwo Adjustment Valves: Closing and Latching speeds controlled by separate regulating Valves,
Universal application Non-handed for standard top jamb or parallel arm installation. Ships with regular arm and parallel arm bracket.Direct replacement for the older style Norton 1602 and 1603, and Yale 52 and 53
3/4" x 8-3/16" mounting holes
853- -
International Door Closer 521 Forearm
International 521 Forearm
Arm measures 9-1/2" loop to loop in the shortest position, and 14" when it is the fully extended . The loop on the left side is 3/8" diameter. The hole spacing on the right hand side of the picture shoe is 1-3/4".
International part # 521
G521- -
International Door Closer 522 Hold Open Arm
International Door Closer 522 Hold Open Arm
This is the New Style Hold Open Arm from International Door Closer. In July of 2014, the old style was discontinued. Look under "More Views" to see the Old Style. Shown in Dark Bronze, ships with all components in the picture.
International part # 522
G522- -
International Door Closer 854 Series
International Door Closer 854 Series
FEATURES
Two Adjustment Valves: Closing and Latching speeds controlled by separate regulating Valves, Universal application Non-handed for standard top
jamb or parallel arm installation.Ships with regular arm and parallel arm bracket.
3/4" x 9-1/16" mounting holes
854- -
International Door Closer 8052 Delayed Action
International Door Closer 8052 Delayed Action
Same closer as the 8050 Series or 8051P, but with Delayed Action. Delayed Action is a function of the Door Closer hydrualic cylinder. The hydrualic cylinder will hold the door open for up to 30 seconds to allow physically challenged individuals time to get through the door way. Adjustable spring power with separate valves for closing, latching and delay
International Door Closer model # 8052-P DU or 8052-P AL
8052- -
International Door Closer 851 Series
International Door Closer 851 Series
FEATURES
Two Adjustment Valves: Closing and Latching speeds controlled by separate regulating Valves,
Universal application Non-handed for standard top jamb or parallel arm installation. Ships with regular and parallel arm bracket3/4" x 6-3/8" mounting holes
851- -
International Door Closer 852 Series
International Door Closer 852 Series
FEATURESTwo Adjustment Valves: Closing and Latching
speeds controlled by separate regulating Valves,
Universal application Non-handed for standard top jamb or parallel arm installation. Shipped with regular and parallel arm bracket.3/4" x 7-3/8" mounting holes
852- -
International Door Closer 855 Series
International Door Closer 855 Series
FEATURES
Two Adjustment Valves: Closing and Latching speeds controlled by separate regulating Valves, Universal application Non-handed for standard top jamb or parallel arm installation.Ships with regular arm and parallel arm bracket.
3/4" x 9-1/16" mounting holes
855- -
International Door Closer 1802 - Fixed Spring Closer
INTERNATIONAL DOOR CLOSER 1802 - FIXED SPRING CLOSER
- Factory tested to meet or exceed ANSI 156.4 Grade 1
- Narrow design permits installation on most modern glass and aluminum doors without adapters
- Two Adjustment Valves: Closing and Latching speeds controlled by separate regulating valves, adjustable after installation.
- Standard application for regular arm and Top Jamb installation; optional parallel arm installation (requires optional PA bracket.)
- Slim Plastic Cover or Full Cover (optional)
- Ranges of Sizes
Back-Check: 1802, 1803, 1804, and 1805 - 5 year warranty
- All Weather Fluid
3/4" X 9-1/16" Hole Spacing
PLACE AN ORDER HERE FOR THE 1802BC
1802- -
International Door Closer 1803BC - Fixed Spring Closer
INTERNATIONAL DOOR CLOSER 1803 - FIXED SPRING CLOSER
- Factory tested to meet or exceed ANSI 156.4 Grade 1
- Narrow design permits installation on most modern glass and aluminum doors without adapters
- Two Adjustment Valves: Closing and Latching speeds controlled by separate regulating valves, adjustable after installation.
- Standard application for regular arm and Top Jamb installation; optional parallel arm installation (requires optional PA bracket.)
- Slim Plastic Cover or Full Cover (optional)
- Ranges of Sizes
Back-Check: 1802, 1803, 1804, and 1805 - 5 year warranty
- All Weather Fluid
3/4" X 9-1/16" Hole Spacing
PLACE AN ORDER HERE FOR THE 1803
1803- -
International Door Closer 1804BC - Fixed Spring Closer
INTERNATIONAL DOOR CLOSER 1804BC - FIXED SPRING CLOSER
- Factory tested to meet or exceed ANSI 156.4 Grade 1
- Narrow design permits installation on most modern glass and aluminum doors without adapters
- Two Adjustment Valves: Closing and Latching speeds controlled by separate regulating valves, adjustable after installation.
- Standard application for regular arm, Top Jamb installation and Parallel arm installation.
- Slim Plastic Cover or Full Cover (optional)
- Ranges of Sizes
Back-Check: 1802, 1803, 1804, and 1805 - 5 year warranty
- All Weather Fluid
3/4" X 9-1/16" Hole Spacing
PLACE AN ORDER HERE FOR THE 1804BC-P
1804- -
International Door Closer 1805BC - Fixed Spring Closer
INTERNATIONAL DOOR CLOSER 1805BC - FIXED SPRING CLOSER
- Factory tested to meet or exceed ANSI 156.4 Grade 1
- Narrow design permits installation on most modern glass and aluminum doors without adapters
- Two Adjustment Valves: Closing and Latching speeds controlled by separate regulating valves, adjustable after installation.
- Standard application for regular arm and Top Jamb installation; optional parallel arm installation (requires optional PA bracket.)
- Slim Plastic Cover or Full Cover (optional)
- Ranges of Sizes
Back-Check: 1802, 1803, 1804, and 1805 - 5 year warranty
- All Weather Fluid
3/4" X 9-1/16" Hole Spacing
PLACE AN ORDER HERE FOR THE 1805BC
1805BC- -
International Door Closer 883 Series
International Door Closer 883 Series
FEATURESThree Adjustment Valves: Closing and Latching
speeds controlled by separate regulating Valves,
and back check
Universal application Non-handed for standard top
jamb or parallel arm installation.Direct replacement for the older style Norton 1602 and 1603, and Yale 52 and 53
3/4" x 8-3/16" mounting holes
883- -
International Door Closer 884 Series
International Door Closer 884 Series
FEATURES
Three Adjustment Valves: Closing and Latching
and back checkspeeds controlled by separate regulating Valves,
Universal application Non-handed for standard top
jamb or parallel arm installation.3/4" x 9-1/16" mounting holes
884- -
International Door Closer 885 Series
International Door Closer 885 Series
FEATURES
Three Adjustment Valves: Closing and Latching and back check. Speeds controlled by separate regulating Valves,
Universal application Non-handed for standard top jamb or parallel arm installation.3/4" x 9-1/16" mounting holes
885- -
International 8610S Rim Device-Grade 1
International 8610S Rim Device-Grade 1
DC 8000 Series Exit Devices are heavy duty and designed for heavy traffic applications. The devices are Underwriters Laboratory (UL, USA and ULC, Canada) listed for Panic Exit Hardware or Fire Exit Hardware, and are certified to ANSI A156.3-2001 Grade 1.
Non handed, 4-1/2" minimum stile width. Smooth Surface.
8610S- -
International 89L Escutcheon Trim
International 89L Escutcheon Trim
Clutched lever trim for use with the 8000 Series International Door Closer Exit Devices. Escutcheon measures 8-27/32" high by 2-15/16" wide by 15/16" thick. Trim is non handed and easily converted in the field. We offer 3 functions, Classroom, Passage and Storeroom.
Classroom - cylinder (not included) locks and unlocks lever handle
Passage - no cylinder hole, lever always active
Storeroom - cylinder (not included) unlocks lever, but lever is always locked when key is removed.89L01- -
International 8630S Surface Vertical Rod Device-Grade 1
International 8630S Surface Vertical Rod Device-Grade 1
DC 8000 Series Exit Devices are heavy duty and designed for heavy traffic applications. The devices are Underwriters Laboratory (UL, USA and ULC, Canada) listed for Panic Exit Hardware or Fire Exit Hardware, and are certified to ANSI A156.3-2001 Grade 1.
Non handed, 4-1/2" minimum stile width. Smooth Surface.
For doors 29" to 36" wide order the Size 30 to 36"
For doors 36" to 48" wide order the Size 48"8630S-