Doors| Ives
-
Wall Mounted Door Holder / Stop WS20
Wall Mounted Door Holder / Stop WS20
- Constructed in cast brass or aluminum.
- Replaceable rubber bumpers feature off-set shoulder and threaded shank
that screws into body of holder. - Hinged strike furnished matches body material and finish.
Furnished wood screws for drywall mounting.
GJW20- -
Wall Mounted Holder/Stop WS445
Wall Mounted Holder/Stop WS445
- Constructed in cast of brass or aluminum.
- Unit functions as a stop but serves as a Hold-Open device when hook is manually engaged in strike.
- Unit requires manual disengagement to release Hold-Open.
- Replaceable resilient, non-marring rubber tip.
WS445 is packed with expansion shield and lead shield for masonry type mounting.
GJW27- -
Wall Mounted Door Holder / Stop WS40
Ives Wall Mounted Door Holder WS40
- Constructed of sturdy cast brass, or aluminum.
- Holder is mounted on wall and strike is mounted on door.
- Roller on holder rides up seats itself on strike, with a heavy duty bumper
pad deadening the sound and shock. - Universal screw pack accommodates all types wall construction.
Base Height: 2"
Base Width: 2-1/2"
Base Projection: 2-1/4"
Engaged Projection: 3-1/2"
Strike Height: 2-1/16"
Strike Width: 3/4"
Strike Projection: 2"GJW40- -
Wall Mounted Bumper WS11
Wall Mounted Bumper WS11
- Constructed in heavy duty cast brass.
- Hexagon section on unit aids in fastening unit when expansion shield is used.
- Replaceable rubber bumpers features off-set shoulder and threaded shank
that screws into body of unit.
Furnished with wood screws for drywall mounting.
GJWB11- -
Wall Mounted Door Stop WS11X
Ives Wall Mounted Door WS11X
- Constructed in heavy duty cast brass.
- Hexagon section on unit aids in fastening unit when expansion shield is used.
- Replaceable rubber bumpers features off-set shoulder and threaded shank
that screws into body of unit.
Furnished with a threaded stud and expansion shield for
masonry type mounting. 2" diameter base by 3-3/4" projection.GJWB12- -
Surface Bolt 8" SB453
• Surface Bolt has 1-3/16" throw for maximum security.
• Strong tension springs prevent creep.
• Ideal for all types of doors.
• Available 8"
• Units packed with standard screws for added security.
• Units packed with both a universal top strike (US) and
a mortise bottom strike (MS).
• Constructed of heavy duty steel.GSB82C -
Floor Mounted Door Stop FS444
Floor Mounted Door Stop FS444
This door stop has been around a long time. We have been selling it for the past 35 years, and it is one of our best sellers year in and year out.
Features: Ideal for interior or exterior use. Cast brass construction. Accommodates door undercut up to 2-1/2". Non-marring rubber tip. Packed with expansion shield and lead shield. This Floor Mounted Door Stop is 3" high, and the base has a 2-1/2" diameter.
RB444HD- -
Lock Guard Narrow Line
- Narrow design unit for use on rose or escutcheon 3-1/2" or less.
- For use with Type 86 Mortise and Type 161 Cylinder Locks
(ANSI 156.13 Series 1000 and ANSI 156.2 Series 4000). - No exposed fasteners on face of unit.
- Unique design provides maximum security, virtually eliminating the opening
between door and frame at the latch point. - Available in 13 Gauge Stainless Steel or 12 Gauge Steel
1-1/2" Wide x 9-1/2" High
Stud center to center: 8-1/2”1625NL- -
Lock Guard Standard Line
- Ideally suited for use with rose or escutcheon 2-3/4" wide or less.
- For use with Type 86 Mortise and Type 161 Cylindrical Locks
(ANSI 156.13 Series 1000 and ANSI 156.2 Series 4000). - No exposed fasteners on face of unit.
- Unique design provides maximum security, virtually eliminating the
opening between door and frame at the latch point. - Available in 13 Gauge Stainless Steel or 12 Gauge Steel.
2-1/2" Wide x 9-1/2" High
Stud center to center: 8-1/2"1625- -
Lock Guard Slim Line
- Designed for use on all Type 161 Cylindrical Locks (ANSI 156.2 Series 2000)
Monolock and Unilock. - No exposed fasteners on face of unit.
- Unique design provides maximum security, virtually eliminating the
opening between door and frame at latch point. - Available in 13 Gauge Stainless Steel or 12 Gauge Steel.
1-1/2" Wide x 7" High
Stud center to center: 4-1/2"1625SL- - Designed for use on all Type 161 Cylindrical Locks (ANSI 156.2 Series 2000)
-
Floor Mounted Door Stop FS18
Floor Mounted Door Stop FS18
Features:
- Security Door Stops designed for use in high vandalism areas.
- Molded from flame resistant, resilient material around a heavy-duty stud.
- Once grouted in concrete, leaves no exposed fasteners to be tampered with or removed.
- Ideal for jail or security cell areas where floor mounted stops are required.
- FS18L also ideal for concrete wall applications.
- Finish: Black, 2" Diameter
FS18S 1-1/2" Height
FS18L 3" HeightGFS18- -
Metal Door Flush Bolt FB458
Metal Door Flush Bolt FB458
The Ives FB458 is a UL Listed Flush Bolt for use on Fire Doors. The face plate measures 1" wide by 6-3/4" long with a depth of 1-1/8". Hole spacing is 1/2 inch by 6-1/4 inches on centers. The bolt has a 3/4" throw and is 1/2" diameter. This Flush Bolt is available in Polished Brass, Oil Rubbed Bronze (dark brown) and Brushed Chrome. We try to stock the 12" rods, which are standard, but we can also get 18", 24", 36" and 48"
Ives Part # FB458
FB458- -
Wood Door Automatic Flush Bolt FB40
Wood Door Automatic Flush Bolt FB40
H.B. Ives FB40 Series are sold has Top, Bottom or in Pairs (top and bottom). Fully automatic, inactive door is latched when active door closes, bolts retract when active door is opened. Top Bolt has no spring tension. They are non handed, but the top and bottom bolts are different. The body size is 1" wide, 8-1/2" tall and 2" deep, the bolts have a 3/4" throw with a 7/8" vertical adjustment.
Ives Part #'s
FB41P - Pairs
FB41T - Top
FB41B - BottomFB40 -
Ives Roller Latch RL30
Ives Roller Latch RL30
The Ives Roller Latch RL30 is constructed of Forged Brass and Plated to your finish. Furnished with a Nylon Roller. Body measures 1" wide by 3-3/8" high by 1-11/16" deep. The roller has a maximum projection of 3/8" and is easily adjustable.
RL30- -
Ives Roller Latch RL32
Ives Roller Latch RL32
The Ives Roller Latch RL32 is constructed of Brass and Plated to your desired finish. The body measures 1-1/8" wide by 2-1/4" high and 2-1/4" deep. The roller is constructed of Nylon, and has an adjustable projection up to 1/2". Fits a standard heavy-duty cylindrical lock cutout.
RL32- -
Ives RL30 and RL1152 Nylon Roller RLPART.1025
Ives RL30 and RL1152 Nylon Roller RLPART.1025
This replacement Nylon Roller and Rivet Package is for the Ives RL30 and RL1152 Roller Latches. The Roller measures 3/4" high by 5/8" diameter. The Rivet measures 1-1/16" long and is threaded on one side.
Ives Part # RLPART.1025
RL30NR -
Lock Guard with Security Pin
The Lock Guard with Security Pin is ideal to cover the latchbolt area of the door, lock and frame, with the added protection of a security pin to prevent separation of the door and door frame. The plate is through bolted with carriage bolts and nuts, which are included with the guard. The plate is constructed of 13 gauge stainless steel. The plate measures 3" wide and 11-1/2" high, with a center to center on the mounting bolts of 10-1/2".
LG1- -
Universal Dome Floor Stop FS439
The Ives Universal Dome Floor Stop FS439 is constructed of cast zinc or stainless steel, depending on the finish. The stop measures 1-1/2" high, with a base height of 1/4" and base diameter of 1-7/8". The pad has a height of 1-1/8" from the floor.
Ives Part Number FS439
GFS439- -
Kickdown Door Stop / Holder For FS1154, FS544, and FS555
Rubber Shoe For GJ1154M and GJL444-555 Kickdown Door Stop / Holder
Replacement rubber shoe
5/8" insert diameter
1" base diameter
8-32 threaded screwGJ1154