Stops / Holders
Door Stops / Holders
Selling door stops / holders for Glynn Johnson, Ives, Burns Manufacturing,
Rixson, International Door Closer, and Grand Specialties for the
past 40 years.
Make sure you click the Text or Image of the Door Stop / Holder
for more information, including the finishes and dimensional information.
-
4" Kickdown Door Holder / Stop Grand Standard
4" Kickdown Door Holder / Stop Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American MadeMade by Grand Specialties
Zinc plated steel or Brass plated
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
GJ604- -
Universal Dome Floor Stop FS439
The Ives Universal Dome Floor Stop FS439 is constructed of cast zinc or stainless steel, depending on the finish. The stop measures 1-1/2" high, with a base height of 1/4" and base diameter of 1-7/8". The pad has a height of 1-1/8" from the floor.
Ives Part Number FS439
GFS439- -
5" Kickdown Door Holder / Stop Grand Standard
5" Kickdown Door Holder / Stop Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American Made
Zinc plated steel or Brass platedmade by Grand Specialties 605z 605b
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
GJ605- -
6" Kickdown Door Holder / Stop Grand Standard
6" Kickdown Door Holder / Stop Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American Made
Zinc plated steel or Brass platedMade by Grand Specialties 606z and 606br
The 606BR is no longer manufacturedAnother feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
GJ606- -
8" Kickdown Door Holder / Stops Grand Standard
8" Kickdown Door Holder / Stops Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American Made
Zinc plated steelMade by Grand Specialties 608z
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
GJ608 -
10" Kickdown Door Holder / Stop Grand Standard
10" Kickdown Door Holder / Stop Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American Made
Zinc plated steelmade by Grand Specialties 610z
Another feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
GJ610 -
12" Kickdown Door Holder / Stop Grand Standard
12" Kickdown Door Holder / Stop Grand Standard
No roll pin at pivot point
Mallable with a pair of pliers
Rubber shoe held on by a screw
American Made
Zinc plated steelAnother feature is their well constructed shoe can be adjusted down as the rubber wears making the holder last way longer than their competitors. Another use for them is as a door floor lock if mounted on the other side of the door. Once kicked down there's no entry possible unless you slide a flat item under the door to lift the door holder leg out of the way and push the door open. It can be opened from the inside as normal with your foot or hand. A very inexpensive security lock.
Made by Grand Specialties 612z
GJ612 -
4" Kickdown Door Holder / Stop Brass Deluxe
4" Kickdown Door Holder / Stop Brass Deluxe
Popular priced crafted holder for interior doors.
Has 1/2" adjustment and replaceable steel re-inforced
shoe for long life. Made of steel with brass plated finish.Made by Grand Specialties
GJ6A -
4" Kickdown Door Holder / Stop FS452
4" Kickdown Door Holder / Stop FS452
Features:
- Units provide simple hold and release, activated with a touch of the foot.
- Cast brass or aluminum construction.
- Stainless steel spring.
- Non-marring rubber shoes have corrugated bottoms to provide secure grip.
- Shoes are easily replaced when worn.
- FS452-4 has a door-to-floor clearance of 2" or less.
- Packed with sheet metal screws.
GJ452-4- -
4" Kickdown Door Holder / Stop FS455
4" Kickdown Door Holder / Stop FS455
Features:
- Units provide simple hold and release, activated with a touch of the foot.
- Cast brass or aluminum construction.
- Non-marring rubber shoes have corrugated bottoms to provide secure grip and a shank which forms its own thread when screwed into threaded cavity of holder.
- When worn, shoes are easily replaced.
- Door-to-floor clearances of 2" or less.
Made by H.B. Ives
GJ44- -
4 inch Kickdown Door Holder / Stop FS544
4" Kickdown Door Holder / Stop FS544
This is one of our most popular Kickdown Door Holder/Stop for the past 35 years.
Features:
- Units provide an economical method to hold open doors.
- Cast of durable iron.
- Non-marring rubber shoes have corrugated bottoms to provide secure grip. Rubber shoe is securely fastened with screw. When worn, shoes are easily replaced.
- FS544 for door-to-floor clearances of 2" or less.
GJL444- -
5" Kickdown Door Holder / Stop FS452
5" Kickdown Door Holder / Stop FS452
Features:
- Units provide simple hold and release, activated with a touch of the foot.
- Cast brass or aluminum construction.
- Stainless steel spring.
- Non-marring rubber shoes have corrugated bottoms to provide secure grip.
- Shoes are easily replaced when worn.
- FS452-5 has a door-to-floor clearance up to 3".
- Packed with sheet metal screws.
Ives Part # FS452
GJ452-5- -
5 inch Kickdown Door Holder / Stop FS555
5" Kickdown Door Holder / Stop FS555
Features:
- Units provide an economical method to hold open doors.
- Cast of durable iron.
- Non-marring rubber shoes have corrugated bottoms to provide secure grip. Rubber shoe is securely fastened with screw. When worn, shoes are easily replaced.
- FS555 for door-to-floor clearances up to 3".
Made by H.B. Ives
GJL555- -
Automatic Floor Type Holder and Stop
Automatic Floor Type Holder and Stop
Cast brass construction, and then chrome plated. Measures 3-11/16" high by 3" wide with a 1-15/16" projection. The strike is 1-3/16" high. Spring loaded brass roller, rolls over the the strike to lock the door in the open position. To release, just give the door a tug.
GJ534- -
Crash Chain Door Stop CS115
Crash Chain Door Stop CS115
- Specially designed for full-size exterior doors.
- Tear resistant, grey vinyl cover.
- Heavy duty compression spring assembled to both ends of chain
and end brackets. - Packed with sheet metal screws.
- Cast Brass brackets with solid, welded steel chain.
Available in 20-1/2", 25-1/2" and 30-1/2" lengths. Length is determined
by the location of your door closerPART # LENGTH
GCC205 20-1/2"
GCC255 25-1/2"
GCC305 30-1/2"GCC205- -
Floor Mounted Door Holder / Stop FS446
Ives Floor Mounted Door Holder FS446
Features:
- Manual type floor holder ideal for interior or exterior use.
- Cast brass or aluminum construction.
- Accommodates door undercut up to 2-1/2".
- Non-marring rubber tip.
- Unit functions as a stop but serves as a Hold-Open device when hook is manually engaged instrike. Unit requires manual disengagement to release Hold-Open.
- Packed with expansion shield and lead shield.
Overall Height 3-3/4"
Height to Stop Center Line 2-5/8"
Diameter 2-1/2"
GJF26- -
Floor Mounted Door Holder/Stop 536
Material: Cast Brass or Bronze with Black Bumper Size: 2-1/2" diameter Base x 3-7/8" High Finishes: US4 brushed brass
US10B dark bronze
US26 polished chrome
US26D brushed chrome
US3 polished brassANSI: L01371 Standard Fasteners: (1) lead anchor
(2) #10 × 1" SMS
(1) #10 × 1" SMS with plastic anchor
(1) 5/16-18 × 2-1/2" stud
(1) 5/16-18 × 2-1/2" hanger boltGJ536- -
Floor Mounted Door Holder/Stop FS40
Ives Floor Mounted Door Holder FS40
This floor mounted door holder has been around since the 1960's. It used to go by the name Glynn Johnson GJF40A or F40A, and was brought over to the H.B. Ives line in the 1990's. Many schools and hospitals have this door holder in use today. It features: Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device. Forged from brass. Unit is activated automatically when door is opened. A firm pull on door releases the mechanism. Strikes accommodate different door to floor clearances. Model numbers are determined by strike/door-to-floor clearances. Holder position on door is adjustable.
Door to Floor Clearance 1/2" or less
Holder Dimensions 3" Wide x 3-11/16" HighGJF40A- -
Floor Mounted Door Holder/Stop FS41
Ives Floor Mounted Door Holder FS41
Features:
• Automatic door holders ideal for heavy-traffic situations that require a simple,
fool-proof, Hold-Open device.
• Forged from brass.
• Unit is activated automatically when door is opened. A firm pull on door releases
the mechanism.
• Strikes accommodate different door to floor clearances.
• Model numbers are determined by strike/door-to-floor clearances.
• Holder position on door is adjustable.Door to Floor Clearance 9/16" to 1-1/16"
Holder Dimensions 3" Wide x 3-11/16" HighGJF41A- -
Floor Mounted Door Holder/Stop FS42
Ives Floor Mounted Door Holder FS42
Features:
• Automatic door holders ideal for heavy-traffic situations that require a simple,
fool-proof, Hold-Open device.
• Forged from brass.
• Unit is activated automatically when door is opened. A firm pull on door releases
the mechanism.
• Strikes accommodate different door to floor clearances.
• Model numbers are determined by strike/door-to-floor clearances.
• Holder position on door is adjustable.Door to Floor Clearance 1-1/8" to 1-9/16"
Holder Dimensions 3" Wide x 3-11/16" HighGJF42A- -
Floor Mounted Door Holder/Stop FS43
Ives Floor Mounted Door Holder FS43
Features:
• Automatic door holders ideal for heavy-traffic situations that require a simple,
fool-proof, Hold-Open device.
• Forged from brass.
• Unit is activated automatically when door is opened. A firm pull on door releases
the mechanism.
• Strikes accommodate different door to floor clearances.
• Model numbers are determined by strike/door-to-floor clearances.
• Holder position on door is adjustable.Door to Floor Clearance 1-5/8" to 2-1/16"
Holder Dimensions 3" Wide x 3-11/16" HighGJF43A- -
Floor Mounted Door Holder/Stop Heavy Duty 541
Floor Mounted Door Holder Heavy Duty 541
3" Diameter
3" Height
Includes the 4-1/2" lag bolt & lag shield.RB541 -
Floor Mounted Door Stop 524
Material: Brass Size: 1-1/4" diameter x 1-1/2" High Finishes: US4 brushed brass
US26D brushed chrome
US10B dark bronze
US3 polished BrassANSI: L02131 Notes: No exposed fasteners Standard Fasteners: (1) #12 × 1-1/2" SMS with plastic anchor
(1) 12-24 × 1" MS
(1) lead anchorGJ524- -
Floor Mounted Door Stop FS18
Floor Mounted Door Stop FS18
Features:
- Security Door Stops designed for use in high vandalism areas.
- Molded from flame resistant, resilient material around a heavy-duty stud.
- Once grouted in concrete, leaves no exposed fasteners to be tampered with or removed.
- Ideal for jail or security cell areas where floor mounted stops are required.
- FS18L also ideal for concrete wall applications.
- Finish: Black, 2" Diameter
FS18S 1-1/2" Height
FS18L 3" HeightGFS18- -
Floor Mounted Door Stop FS434
Ives Floor Mounted Door Stop FS434
Features:
- Burnished wrought steel.
- Soft, resilient gray rubber.
- For undercut doors up to 1-1/2".
- Packed with screws and plastic anchors.
Overall height 2-5/8"
Base size 1-1/2" W x 2-3/4" LGJ434 -
Floor Mounted Door Stop FS442
Ives Floor Mounted Door Stop FS442
This Floor Mounted Door Stop used to go by the name Glynn Johnson GJFB19 or FB19. When Ingersoll Rand purchased H. B. Ives in the 1990's they brought it over under the Ives Floor Mounted Door Stop FS442. Features: Designed to blend well with all types of construction and provide a minimum of hindrance to cleaning efforts. Accommodates door undercut up to 2". Heavy-Duty cast brass or aluminum construction. Non-marring rubber bumper. This door stop has an overall height 2-7/8". Mounted shield and screws included.
GJFB19-