Stops / Holders
Door Stops / Holders
Selling door stops / holders for Glynn Johnson, Ives, Burns Manufacturing,
Rixson, International Door Closer, and Grand Specialties for the
past 40 years.
Make sure you click the Text or Image of the Door Stop / Holder
for more information, including the finishes and dimensional information.
-
Wall Mounted Door Stop WS11X
Ives Wall Mounted Door WS11X
- Constructed in heavy duty cast brass.
- Hexagon section on unit aids in fastening unit when expansion shield is used.
- Replaceable rubber bumpers features off-set shoulder and threaded shank
that screws into body of unit.
Furnished with a threaded stud and expansion shield for
masonry type mounting. 2" diameter base by 3-3/4" projection.GJWB12- -
Wall Mounted Holder/Stop WS445
Wall Mounted Holder/Stop WS445
- Constructed in cast of brass or aluminum.
- Unit functions as a stop but serves as a Hold-Open device when hook is manually engaged in strike.
- Unit requires manual disengagement to release Hold-Open.
- Replaceable resilient, non-marring rubber tip.
WS445 is packed with expansion shield and lead shield for masonry type mounting.
GJW27- -
Wood Door Automatic Flush Bolt FB40
Wood Door Automatic Flush Bolt FB40
H.B. Ives FB40 Series are sold has Top, Bottom or in Pairs (top and bottom). Fully automatic, inactive door is latched when active door closes, bolts retract when active door is opened. Top Bolt has no spring tension. They are non handed, but the top and bottom bolts are different. The body size is 1" wide, 8-1/2" tall and 2" deep, the bolts have a 3/4" throw with a 7/8" vertical adjustment.
Ives Part #'s
FB41P - Pairs
FB41T - Top
FB41B - BottomFB40 -
Wall Mounted Holder/Stop 531
Material: Cast Brass or Bronze with Black Bumper Size: 2-1/2" diameter Base x 3-5/8" Projection Finishes: US26 polished chrome
US26D brushed chrome
US3 polished brass
US4 brushed brass
US10B dark bronzeANSI: L02021 Standard Fasteners: (1) 5/16-18 × 2-1/2" stud
(2) #10 OH SMS
(1) #10 × 1" OH SMS with plastic anchor
(1) lead anchor
(1) 5/16-18 × 2-1/2" hanger boltGJ531- -
Dust Proof Strike DP1
- Designed for use with the bottom bolt of all flush bolts.
- Spring-loaded plunger returns to floor or threshold level anytime
flush bolt is retracted, eliminating need to clean standard
floor strikes. - Strike hole is 3/4" Diameter and 1-1/8" Deep
DP1 Face Plate: 1-7/16" Diameter
Body: 1-3/16" Diameter x 1-7/8" DeepDP1- -
Dust Proof Strike DP2
- Designed for use with the bottom bolt of all flush bolts.
- Spring-loaded plunger returns to floor or threshold level anytime
flush bolt is retracted, eliminating need to clean standard
floor strikes. - Strike hole is 3/4" Diameter and 1-1/8" Deep
DP2 Face Plate: 1-5/8" W x 3-1/2" L x 1/8" Thick
Body: 1-3/16" Diameter x 1-7/8" DeepDP2- -
-
Glynn-Johnson 100 Series Overhead Door Holder Concealed Mounting
Glynn-Johnson 100 Series Overhead Door Holder Concealed Mounting
Glynn-Johnson 100 series holders and stops provide the most reliable and versatile concealed overhead door control. They are designed for installation on virtually all types of doors mounted on conventional type butt hinges, pivots, continuous hinges, swing clear hinges and numerous other specialty hinges. When used in conjunction with many surface-applied door closers, Glynn-Johnson 100 series holders and stops provide the most effective control for entrance doors and vestibule doors of all types, as well as heavy or often
used interior doors. Templates provided allow for variable mounting positions, ranging from 85° - 110° of opening.Painted finishes are also available. Please Call 1-800-642-2403
GJ100 -
Glynn-Johnson 410 Series Overhead Door/Stop Concealed Mounting
Glynn-Johnson 410 Series Overhead Door Holder/Stop Concealed Mounting
The perfect combination of form and function, Glynn-Johnson 410 series holders and stops offer effective door control and a low-profile design. Each model is constructed so that the channel is encased in the door and the jamb bracket is mortised in the frame. When the door is open, the arm and jamb bracket are visible. Conversely, when the door is in the closed position, the entire holder is completely concealed.
The 410 fits in a mortised channel on top of the door, if your doors are not mortised on the top of the door, you would have to mortise them out. Replaces the older version GJ310, GJ320 and GJ330 series.
GJ410 -
Wall Bumper WS407-CVX
The Ives Wall Bumper Stop WS407-CVX our economically price wall bumper. The metal ring is a wrought stainless steel, otherwise known as stamping. It features a concealed tamper-proof mounting, and is shipped pre-assembled to the back plate is reduce installation time. Installation is easy, just insert the screw driver through the pin hole in the rubber and tighten. The bumper is 2-1/2" in diameter and projects out 1".
GJ50W- -
Surface Bolt 8" SB453
• Surface Bolt has 1-3/16" throw for maximum security.
• Strong tension springs prevent creep.
• Ideal for all types of doors.
• Available 8"
• Units packed with standard screws for added security.
• Units packed with both a universal top strike (US) and
a mortise bottom strike (MS).
• Constructed of heavy duty steel.GSB82C -
Glynn-Johnson 450 Series Overhead Door Holder Surface Mounted
Glynn-Johnson 450 Series Overhead Door Holder Surface Mounted
Glynn-Johnson 450 series holders and stops provide reliable and versatile surface-mounted overhead door control for all medium to light-duty applications. The visible components are available in a wide variety of architectural finishes to complement any design. The Glynn-Johnson 450 series holders and stops are designed for installation in virtually all types of doors and frames including doors with conventional butt hinges, offset pivots, continuous hinges, swing clear hinges and many other specialty hinges. The templates provided allow for variable mounting positions, ranging from 85° - 110° of opening.
The 450 Series replaces the older GJ360, GJ370 and GJ380 Series.
GJ450 -
Wall Mounted Door Holder / Stop WS40
Ives Wall Mounted Door Holder WS40
- Constructed of sturdy cast brass, or aluminum.
- Holder is mounted on wall and strike is mounted on door.
- Roller on holder rides up seats itself on strike, with a heavy duty bumper
pad deadening the sound and shock. - Universal screw pack accommodates all types wall construction.
Base Height: 2"
Base Width: 2-1/2"
Base Projection: 2-1/4"
Engaged Projection: 3-1/2"
Strike Height: 2-1/16"
Strike Width: 3/4"
Strike Projection: 2"GJW40- -
Glynn-Johnson 70 Series Overhead Door Holder Surface Mounted
Glynn-Johnson 70 Series Overhead Door Holder Surface Mounted
Glynn-Johnson 70 and 79 series models are constructed primarily of Brass and 300 series Stainless Steel substrates, with several components fabricated of Steel treated to resist corrosion. Models in the 70 series utilize a 1/2"-diameter stainless steel bar, while the 79 series uses a 3/4" stainless steel bar. The bar is always provided in US32D. The spring, washer and nut are provided in a clear zinc finish.
GJ70 -
Glynn-Johnson 79 Series Overhead Door Holder Surface Mounted
Glynn-Johnson 79 Series Overhead Door Holder Surface Mounted
Glynn-Johnson 70 and 79 series models are constructed primarily of Brass and 300 series Stainless Steel substrates, with several components fabricated of Steel treated to resist corrosion. Models in the 70 series utilize a 1/2"-diameter stainless steel bar, while the 79 series uses a 3/4" stainless steel bar. The bar is always provided in US32D. The spring, washer and nut are provided in a clear zinc finish.
GJ790 -
LCN SEM7850-515 Magnet Hardware Package
LCN SEM7850-515 Magnet Hardware Package is used to mount the Armature or the Door Mounted part of the Magnetic Door Holders. If you are currently using LCN door holders, you will not need to purchase this. However, if you are using another brand and they have gone missing, you will need to purchase this component.
SEM7850-515 -
Glynn-Johnson 81 Series Overhead Door Holder Surface Mounted
Glynn-Johnson 81 Series Overhead Door Holder Surface Mounted
Glynn-Johnson 81 series holders and stops provide rugged, heavy-duty door control. The jointed-arm design provides the most effective stop mechanism available. The shock absorber bracket is surface mounted, usually with sex bolts. The jamb bracket is mounted to the stop of the frame, so a minimum of door and frame preparation is required.
GJ80 -
Door Silencers For Wood Doors
Door Silencers For Wood Doors
For use on Wood Doors. Insert into 1/4" hole in door frame.
Height: 3/4"
Diameter: 3/8"
Thickness: 1/8"GJ65 -
Glynn-Johnson 90 Series Overhead Door Holder Surface Mounted
Glynn-Johnson 90 Series Overhead Door Holder Surface Mounted
Glynn-Johnson 90 series holders and stops are the most rugged models available for heavy-duty applications. The channel is surface-mounted to the door, most often with barrel nuts, and the jamb bracket is surface mounted to the jamb, requiring minimal door and frame preparation.
GJ90 -
Door Silencer For Metal Doors
For use on metal frames featuring
pneumatic design that, once installed,
forms an air pocket to absorb sound and
reduce noise of door closing.Diameter: 1/2"
Thickness: 1/8"
GJ64