Locker Parts | Penco Locker

Penco Products door frame assembly are the whole front face of the lockers. Includes door, frame and all latching with handle choice. This takes 6-8 weeks delivery. These doors are standard louvered known as the vanguard lockers. These lockers are typically in the hallways of schools. 

color chart

Penco Locker Single Tier lock bar, for a 72" ht locker, 62-1/2" length. Used 1966 - current. Used with the recess handle or the vanguard locker handle (2-piece assembly). Also known as 61828c in gray color. 3 Nylon Latch Clips and spring included.

Penco Locker Single Tier lock bar, for a 60" ht locker, 50-5/8" length. Used 1966 - current. Used with the recess handle or the vanguard locker handle (2-piece assembly). Also known as 61826c in gray color. 3 Nylon Latch Clips and spring included.

Penco Locker Double Tier lock bar, for a 60" ht locker, 27" length. Used 1996 - current. Used with the recess handle or the vanguard locker handle (2-piece assembly). Also known as 626574c in gray color. 2 Nylon Latch Clips and springs included.

Penco Locker Double Tier lock bar, for a 60" ht locker, 21" length. Used 1996 - current. Used with the recess handle or the vanguard locker handle (2-piece assembly). Also known as 626572c in gray color. 2 Nylon Latch Clips and springs included.

Penco Locker Two person Latch Bar used 1970-1984. also known as 60860c.

Penco Locker Tops or Bottoms for replacement. They are only used for the very top and Bottom of the lockers and as a divider. Made of 24 gage steel only available in 073 champagne. 4-6 weeks delivery.

Penco Locker Two Person latch Bar for a Right handed Locker. Used 1970-1984, also known as 60861c.

Penco Recess Locker Handle, stainless steel, also known as 60890H.
Used with a multi latching lock bar. Security screw included.

Penco Locker shelves for top shelf replacement. Example of sizes (12"x 15") 12" width x 15" depth. The shelf width is the width of the locker, the depth is usually 1-1/4" less than the depth of the locker. 24 gage steel only available in 073 champagne. 4-6 weeks delivery.

Penco Tool Assembly, Uses 108654 palnut prior to 1972. Also known as 63002, 4410, 74021, pn3312.

Penco Locker Tool Assembly, Uses 108642 palnut, 1972 to present. Also known as 63001, 4425, 74010, pn3314, lp8819. Your locker door should have a oval hole that is ½” wide and a little over ¾” high.

Penco Recess Locker Lift with Trigger in 028 Grey color. This is for a Right Handed Locker Facing it with the hinges on the right side. (Handle on the Left Side). Also known as 608930c.

Penco Locker Handle, Old Style not Plated. Also known as 60103, 4385, 74006, pn3317, lp8812.

Penco Locker Bottom Cam Assembly for double door lockers.

Penco Locker Top Cam assembly for double door lockers.

Penco Locker Padlock Staple, Pop Rivet sold separately. Also known as 60104, 4050, 74014, pn3321.

Penco Locker Handle Assembly, includes case, lift and palnut 108642 1972 to current. **Note these do not say Penco on the Lift. Also known as 60101, 4010, 74008, pn3309, lp8809, 8658.

Penco Locker Lift Trigger only, Clear in color. Also known as 9687. Note use pop rivet part number 108695. The trigger mounts to the recess lifter to protect your finger. The trigger can be painted in the field and only come in clear color. 

Single prong locker hooks for coat rods and school type lockers. The hook is made from a metal 1/8" diameter tube x 4-3/4" ht x 2" width. These locker hooks are wall mounted to the locker back or sides. The hole spacing is 3/4", the top hole is 3/16" round with the one lower.& Also known as 8699.

Locker Number Plates fits most lockers except Lyon. Make sure to add what numbers you are looking for. 1-600 in stock. Pop rivets included. Overall size 2-5/16" x 1-1/16". Manufactured in the USA. Also known as 99001, 70072, bu0110, lu122. Hole spacing 1-3/4".

Note: Blank number plates are available and in stock, with no numbers on them. Each number plate you need is quantity one. Ten plates equal qty 10 for ordering.

*** Note we only sell 1-600, no special orders. ***

Lock Bar Plastic Clip, Used with Penco, Republic and Wilson lockers. Replaces old Spiral Pin. Also known as 4630, 74003, pn3304, lp8831. The dimensions are 1/2" head, for 3/16" hole on lock bars to keep them vertical.