Partition Parts
Robert Brooke & Associates is a leading commercial bathroom stall hardware parts provider with over 35 years of experience in the stalls and toilet partition hardware industry. We have worked with various organizations throughout the years to provide them with everything they need for their commercial restrooms including bathroom partition hardware. We have had the pleasure of distributing bathroom stall hardware for schools, churches, athletic centers and other facilities with heavy restroom traffic.
We sell a variety of bathroom stall hardware including but not limited to brackets, coat hooks, door pulls, hinges, latches, keepers and stoppers. For high-quality, affordable commercial bathroom stall hardware, look no further than Robert Brooke & Associates.
Restroom Stall Parts Manufacturers
If you like to purchase bathroom stall hardware and equipment from reputable brands, you’ll be pleased to know that we carry hardware from some of the most trusted restroom stall hardware manufacturers in the industry. You can be confident when placing your order with us knowing that we only sell restroom stall parts from highly respected brands.
The manufacturers that we distribute parts from produce strong and durable bathroom stall hardware that lasts for a long time. These are United States and Canadian companies whose main focus is manufacturing quality-made restroom stall hardware for consumers. A few of these restroom stall hardware brands also have an extended inventory that includes washroom accessories.
As suppliers of the Grade A products that these brands create, we are used to seeing satisfied customers who order bathroom stall hardware from our online store. Let us know if you come up with any questions about one of the restroom stall parts brands and we will assist you promptly.
Our Bathroom Stall Parts Supply
We have many parts to choose from in our supply of bathroom partition hardware. Be sure to choose the correct bathroom stall hardware before you place your order.
A specific brand of bathroom stall door hardware might only be of good use on that specific brand of stall, so check the name tag on your toilet stalls before shopping for your parts. For example, you will only be able to use an Accurate Bolt Latch Slide Pin on metal stalls that were manufactured by the Accurate brand.
We also sell other bathroom stall door hardware that will only work on stalls made out of a specific material. The Flush Metal Top Hinge Pin ⅜ inch X 3-¼ inch is one example of restroom stall hardware that was made to be used on laminate stalls. You will find that some of the other bathroom partition hardware we carry should only be used on laminate stalls.
There are some bathroom stall parts that we sell that will work with more than one brand of partitions. For example, the Cast Stainless Steel Slide Bolt Latch that is 1-½ inch W X 3-¼ inch L, 2-¾ inch between screws is a piece of stainless steel bathroom stall hardware that can be used on both Accurate and Global stalls.
We have pages and pages of bathroom stall hardware to look through. If you already know exactly what restroom stall hardware you need, then you might want to make it easier by narrowing your search in our Search Bar. To get more information on our supply of bathroom stall parts, please visit our RBA Partitions and Parts Catalog.
Questions About Bathroom Stall Hardware
Please direct your bathroom stall hardware related inquiries to our main office by phone call or email. The team at Robert Brooke & Associates is ready to answer your questions about the bathroom stall door hardware that we carry.
Please contact us during business hours so that we can help you out if you get stuck on something while shopping our bathroom stall door hardware selection. Call our phone at 1 (800) 642-2403 or send an email to one of our professionals at Sales@RobertBrooke.com.
-
Chrome Plated "U" Bracket For 1-1/4" X 1-1/2" X 1-3/8
If your toilet partition or bathroom stall wall bracket is cast with the number 1940 on the back, then you have the “U” Wall Bracket for 1-1/4″ thick toilet partition panels. The wall bracket is usually mounted on the wall or the pilaster to mount the toilet partition stall panels. This bracket is 1-1/2″ wide x 1-3/8″ tall, with the through hole located at 1″ from the back. If features 4 holes with a 1/4″ diameter, with two of them on the base. The bracket is made of a die cast material that is then polished chrome plated. This bracket is sometimes called a Toilet Partition or Bathroom Stall “U” Bracket, or “U” Wall Bracket.
9A0194 -
Cast SS One Ear Bracket For 7/8" Panel, 1-1/2" X 2-1/2"
Toilet Partition One Ear Wall Bracket For 7/8" Panel Cast Stainless Steel
Cast stainless steel construction. Base of the bracket is 2" x 1-1/2", with 1-1/8" hole spacing. Bracket legs project out 2-1/2" with the screws at 2-1/8" on center from the base. The four holes are 1/4" diameter. Also known as a Bathroom Stall One Ear Wall Bracket or One Ear 7/8". Manufacture part # 1653.
Shipped with mounting screws.
9A1653 -
Aluminum Bracket One Ear 1" Panel 1-1/2" X 2-3/4" L
Toilet Partition Bracket One Ear For 1" Panel Aluminum
Constructed of extruded anodized aluminum. The base is 1-1/2" high by 2-5/8" wide, with mounting holes 1-3/8" on center. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs are 1" apart, and is designed for 1" thick panels. This bracket is also known as a One Ear Wall Bracket, One Wing Wall Bracket, Toilet Partition One Ear Bracket, or Bathroom Stall One Ear Bracket. The manufacturers part number is 1764. The bracket ships with all the required fasteners.
9A1764 -
Stamped SS 'U' Bracket 3/4 Panel, 1-1/2 X 1-1/2 L
Toilet Partition "U" Wall Bracket For 3/4" Thick Panel Stamped Stainless Steel. 14 gauge (.075" thick) stamped stainless steel construction. Base is 1-1/2" x 15/16" . Leg project out 1-1/2" with the thru hole at 1-1/8" from the base. The 4 thru holes are 1/4" diameter, two of them are the mounting holes. Also known as a Bathroom Stall U Wall Bracket. Manufacturer part # 1899. Shipped with screws.
9A1899 -
Cast SS Coat Hook & Bumper 3-1/8" Projection X 2-1/8"High
Coat Hook & Bumper 3-1/8" Projection X 2-1/8" High Cast Stainless Steel Construction
Cast stainless steel construction. Coat hook bumper projects out 3" and has a rubber insert. The hook projects out 1-7/32". The coat hook bumper base is 1-7/16" wide by 2-1/4" high with a hole spacing of 7/8". Also known as a Bathroom Stall Hook. Manufacture part # 4003.
9A4003 -
Continuous Door Stop for 1-1/4" Pilaster
Toilet partition continuous door stop for powder coated steel partitions, this has a slight round edge for attaching. The length is 57" and is used on a 1-1/4" slight round edge pilaster for mounting. Used with 1" doors and has a concealed turn latch with the pin coming out the center edge of the door. The hole spacing for the slot is 28-1/2" dead center of unit. The slot for the bolt to lock to is 7/16" wide x 5/8"ht. This helps with blocking the door gaps on the locking side of the door. This is made of brushed aluminum material and is used with in or out swing doors. Also known as Hadrian partitions part number 560058.
9A560058 -
Pilaster Shoe for 1-1/4" Round Edge Thick x 3" ht
Toilet partition round edge pilaster shoe, stamped stainless steel construction. Pilaster Shoe measures 2" to 24" wide by -1-1/4" thick by 3" high. This size pilaster post shoes are split on one end for easy installation. Also known as a Bathroom Stall Pilaster Post Shoe Round Edge. Used for the base of the support system with pilaster mounting.
9A0308 -
Flush Metal Concealed Turn Latch & Cover
Flush Metal concealed turn latch knob and cover plate with set screw is the current style. This turn latch is one of a kind, under the cover plate and under the turn latch you will notice a diamond shape that are male - female. Only buy this if this is what you have exactly. Many of these parts look the same but are not and will not work unless this is what you have. Manufactures #143520. This part has a 1-3/8" diameter.
9FL143 -
Matte Black Hadrian 3/4" Pedestal Support Brace
The Matte Black Hadrian 3/4" Pedestal Support Brace is constructed of stainless steel. Pedestal support brace is used in place of a traditional pilaster where the pilaster anchors to the ground. This pedestal support brace allows pilasters to be off the ground but still provide structure to partitions. Designed to be used under a pilaster or panel that is 3/4" thickness. Available in 12", 9" and 4" heights and comes with fasteners for installing. Known as manufacturers part number 674441-12AF-BLK, 674441-9AF-BLK and 674441-4AF-BLK.
9H674441B -
Chrome Plated One Ear Bracket For 3/4" x 1-1/2" x 2-1/2"L
If your toilet partition (bathroom stall) wall bracket is stamped 1640, then chances are you have the One Ear Wall Bracket for 3/4″ thick toilet partition panels. This brackets base is 1-3/8″ wide x 2″ long with 1-1/8″ center to center hole spacing. The distance from the bottom of the base to the screw holes on the legs is 2-1/8″. The bracket is made of a die cast material that is then chrome plated. The bracket sometimes goes by the name Bathroom Stall One Ear Bracket, Toilet Partition One Ear Bracket, Single Leg Bracket or Wall Bracket.
9A0164 -
Cast SS Two Ear Bracket 1" Panel 1-1/2" X 2-1/2"
Cast SS Two Ear Bracket 1" Panel 1-1/2" X 2-1/2"
Cast stainless steel construction. Base is 1-1/2" x 4" with 3" hole spacing. Bracket walls are 1/8" thick. The legs project out 2-1/2" with the thru holes at 2-1/8" from the bottom of the base. Also known as a Bathroom Stall Two Ear Wall Bracket, or Two Ear 1". Manufacture part # 1753
Shipped with mounting screws.
9A1753 -
Aluminum Bracket One Ear 1" Panel 3" H X 2-3/4" L
Toilet Partition Wall Bracket One Ear For 1" Panel Aluminum
Constructed of extruded anodized aluminum. Base is 3" high by 2-5/8" wide with the mounting holes 1-3/8" on center. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The 8 holes are 1/4" diameter. All wall thicknesses are 1/8". This bracket is sometimes known as a Bathroom Stall One Ear Wall Bracket, or Toilet Partition One Ear Wall Bracket. The manufacturers part number is 2274 and 650-1848. This bracket ships with all the needed fasteners.
9A2274 -
Chrome Plated Door Pull 3-1/2" Between Screws
Partition Door Pull 3-1/2" Between Screws Chrome Plated
Chrome plated Zamac die cast construction. The pull measures 4-3/4" wide and projects 1" with a hole spacing of 3-1/2". The mounting holes are threaded for a 10-24 screw. Also known as a Bathroom Stall Door Pull. Manufacture part # 5400.
9A0540 -
Stamped SS Door Hook & Bumper Stop Inswing 5/8"Wide X 2-3/4"Proj
Partition Door Hook & Bumper Stop Inswing Stamped Stainless Steel
Stamped stainless steel 1/16" thick construction. The hook and stop measures 5/8" wide by 2-3/4" high by 3-1/16" projection with a 1" hole spacing. There is a rubber bumper on the end of the 3-1/16" projection. Also known as a Bathroom Stall Hook. Manufacture part # 4009
9A4009 -
Top & Bottom Hinge Assembly For 1" Partition Door, 1-1/4" Pilaster Sq
Toilet Partition Top & Bottom Hinge Assembly For 1" Door, 1-1/4" Pilaster Square Edge. Polished chrome plated zamac die cast construction. Kit includes Bottom & Top Hinges, Pintle, Nylon Cam, Top Pin and Bottom & Top Hinge Door Inserts. Hinges measures 2-1/4" high by 1-1/4" wide with screw spacing of 1-1/2". Manufacture part number 63130 kit. The top hinge wall to center of the 3/8" diameter hole is 1-1/4" which is known as a 3790 hinge. The bottom hinge wall is also 1-1/4" to the center of the 5/16" hole and known as 3290 hinge. The Top Pin is 3/8" x 3-1/2". Screws are also included.
9A3130 -
Hinge Sightline Filler for Partition Door Gaps
Toilet partition door hinge side sightline filler for 1-1/4" thick powder coated steel pilaster post. This product has a slight round edge specifically for this material. The demensions are 1-1/4"x 54-1/2", this product is brushed aluminum and can be cut in the field. This product will help block the gap on the toilet partition hinge side. Known as 560458 from Hadrian partitions and can be used with other factories.
9A560458 -
ASI Alpaco Indicator Latch
ASI Alpaco Indicator Latch is used by Accurate and Global Partitions. This European design is featured on the Alpaco Classic and Elegance Collection. Stainless steel construction make this indicator latch durable. These latches are created to be used on 3/4" thick material. Red and White indicator is used to show whether the stall is in use. Offers emergency access fom the outside with coin slot feature. Also known as 8273100.
9G8273100 -
Hadrian Headrail Return Kit Metal Stalls
Hadrian Headrail Retrun Kit is designed to work with Hadrians Metal Stall Partitions. The headrail retun kit will work with 1-1/4" thickness headrails from Hadrian. Designed to work with powder coated steel and stainless steel stalls. This kit includes Brackets,Wall Anchoring Screws, Plastic Anchors, Fastening Screws and Headrail End Cap. Can be used to run across the top of partitions either between two wall or runnning from a rear wall to a pilaster. Often used in conjuction with Hadrian Headrail (60")9HR60A, (74")9HR74A and (96")9HR96A.
Manufacturer Part# 607200.
9HH607200 -
Hadrian Headrail Return Kit Solid Plastic Stalls
Hadrian Headrail Retrun Kit is designed to work with Hadrians Solid Plastic Stall Partitions. The headrail retun kit will work with 1" thickness headrails from Hadrian. Designed to work with solid plastic stalls. This kit includes Brackets,Wall Anchoring Screws, Plastic Anchors, Fastening Screws and Headrail End Cap. Can be used to run across the top of partitions either between two wall or runnning from a rear wall to a pilaster. Often used in conjuction with Hadrian Headrail 9HRXXSP.
9HH699 -
Stainless Steel Double Door Pull for 3/4” and 1”
Stainless Steel Double Door Pull made for 3/4” and 1” thick doors. Measurements for the handle 6-5/8" width, 5-1/2" hole to hole spacing, 5" interior opening and 2" height. Constructed of stainless steel with though bolts for mounting back to back on partition doors.Commonly known as part number 189373. This double door pull kit comes with fasteners and Torx Bit(T-20) for 3/4" and 1" thck doors.
9A189373 -
Matte Black Hadrian 1/2" Pedestal Support Brace
The Matte Black Hadrian 1/2" Pedestal Support Brace is constructed of stainless steel. Pedestal support brace is used in place of a traditional pilaster where the pilaster anchors to the ground. This pedestal support brace allows pilasters to be off the ground but still provide structure to partitions. Designed to be used under a pilaster or panel that is 1/2" thickness. Available in 12", 9" and 4" heights and comes with fasteners for installing. Known as manufacturers part number 673441-12AF-BLK, 673441-9AF-BLK and 673441-4AF-BLK.
9H673441B -
Chrome Plated One Ear Bracket For 7/8" x 1-1/2" x 2-1/2"L
If your toilet partition (bathroom stall) wall bracket is stamped 1650, then chances are you have the One Ear Wall Bracket for 7/8″ thick toilet partition panels. This brackets base is 1-3/8″ wide x 2-1/8″ long with 1-1/8″ center to center hole spacing. The distance from the bottom of the base to the screw holes on the legs is 2-1/8″. The bracket is made of a die cast material that is then chrome plated. The bracket sometimes goes by the name Bathroom Stall One Ear Bracket, Toilet Partition One Ear Bracket, Single Leg Bracket or Wall Bracket.
9A0165 -
Cast SS Two Ear Bracket 1 1/4" Panel, 1-1/2" X 2-1/2"L
Toilet Partition Two Ear Wall Bracket For 1 1/4" Panel Cast Stainless Steel
Cast stainless steel construction. Base is 1-1/2" x 4" with 3" hole spacing. Bracket walls are 1/8" thick. The legs project out 2-1/2" with the thru holes at 2-1/8" from the bottom of the base. Also known as a Bathroom Stall Two Ear Wall Bracket, or Two Ear 1". Manufacture part # 1833
Shipped with mounting screws.
9A1833 -
Aluminum Bracket One Ear 1-1/4" Panel, 1-1/2" - 2-3/4" L
Toilet Partition Bracket One Ear For 1-1/4" Panel Aluminum
Constructed of extruded anodized aluminum. The base is 2-5/8" wide x 1-1/2" high, with the two mounting screws 1-3/8" on center. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The distance between the legs is 1-1/4". It is designed for 1-1/4" thick panels. The 4 screw holes are 1/4" diameter. This bracket is also known as a One Ear Wall Bracket, 1844 One Ear Wall Bracket, Toilet Partitoin One Ear Bracket, or Bathroom Stall One Ear Bracket. The bracket is shipped with all the mounting screws.
9A1844 -
Stamped SS Continuous "H" Bracket For 1" X 1" X 54"
Toilet Partition Continuous Alcove "H" Bracket For 1" Panel x 54" Long Stamped Stainless Steel
18 gauge (.05" thick) stamped stainless steel construction. Bracket is 1" x 3-1/2" x 54" long. Legs project out 1-3/4" with the thru hole at 1-3/8" from the base. Mounting and thru bolts every 13" or so. Also known as a Bathroom Stall Alcove Bracket or "H" Bracket. Manufacturer part # 2859.
Shipped with screws.
9A2859
