Search results for: 'cloth latch than tip acrylic stair top'
-
Emco T Wall Rack
Crush-free coat storage system which includes four No. 10 ball top hangers and locked-in-place receptacles per foot of shelf.
Note: Unit includes four hangers per foot.
Coat Rack Information
Height: 12" (305mm)
Length: 2' to 50'+
Projection: 11 1/2" (292mm)
Slat Color Options: Bronze Extruded Aluminum Satin (Silver) Aluminum
Racks can be made any size up to 50'.Manufacturer will use slip joints so the rack can ship UPS/FEDEX.
EM-T1-xx -
Corner Guard CG-10 3" x 3"
Corner Guard CG-10 3" x 3"
90 degree 3” x 3” vinyl corner guard with aluminum retainer. Vinyl flex action absorbs impact, and is .100” thick, the aluminum retainer is .062 thick. Available in 4, 8 and 9 foot lengths. Top and bottom end caps included with the corner guard.
CG-10- -
Monarch 19-V Exit Device
Monarch 19-V Exit Device
Hand: Field reversible.
Functions: All functions built into “EO” device.
Finishes: Powder-coated aluminum–SP28; powder-coated duranodic–SP313;
Latchbolt: Top stainless steel 3⁄4" throw. Bottom square bolt 1⁄2" throw.
Deadlocking Latchbolt: Standard.
Dogging Feature: 1⁄2 turn hex dogging standard. No threaded parts to wear out.
Stock Sizes: 3'0" and 4'0"
Doors: 13⁄4" thick, wood or metal.
Narrow Stile Doors: To 1-3⁄4" N.S. aluminum. With control trim–2-1⁄4" min. stile.
Projection: 2-1⁄2" max., 1-7⁄8" dogged.36" device is only 33-1/2" wide
48" device is only 43-1/2" wideG19VEO- -
Corner Guard CG-20 2" x 2"
Corner Guard CG-20 2" x 2"
90 degree 2” x 2” vinyl corner guard with aluminum retainer. Vinyl flex action absorbs impact, and is .085” thick, the aluminum retainer is .062 thick. Each corner guard includes the end caps. Available in 4, 8 and 9 foot lengths. Corner guards are shipped with a top and bottom end cap.
CG-20- -
Magnuson DSFH Series Rak
These floor racks bring function and flexibility to situations requiring high capacity garment storage.
Offered in single faced versions, in hook and hanger styles and in lengths of 3, 4, and 5 feet; they are the perfect solution to a wide variety of public area coat storage applications.
Hanger style features 1" diameter chrome tube that accepts open hook, closed loop, ball or T-top hangers with receptacle (sold separately). Hook style includes charcoal gray K-73 vinyl coated steel triple prong hooks. Racks available in powder coated steel finishes of Medium Gray, Sandstone, and Black.
MG-DSF-xx -
Aluminum Nosing 2 inch with Grit Surface
This 2-1/2" deep nosing is made from the same material as our Grit-Surface Aluminum Treads. The front edge is 1-3/4" deep (inside nose dimension is 1-1/4"). The nose has a 1-3/4" wide abrasive finish with a 3/4" tapered aluminum back edge. Both the nose and tapered edge have a 1/4" wide reflective yellow safety tape strip for additional safety. The nosing is available in abrasive colors of Black, Brown, Blue, Gray, Green, Red or Yellow. Nosing is available solid (for glue-down applications) or with countersunk holes (for screw-down applications) every 12". Nose drops 1-1/16".
SPECIFICATIONS:
Furnish and install Musson Grit-Surface Aluminum Nosings, 3/16" thick X 2-1/2" deep; cut lengths up to 10 foot long. Tread surface shall have aluminum oxide abrasives permanently bonded to a heat treated aluminum nosing with 1/4" wide reflective yellow safety strip on both the top surface (between the grit surface and aluminum) and the nose. Grit surface shall be in one of the following standard colors: Black, Brown, Blue, Gray, Green, Red or Yellow. Nosings can be supplied with two countersunk holes every 12" for screw down installation or without holes for installation with our #400 Neoprene Contact Cement.
Custom sizes are available up to 10' long
GSA2N-
