Search results for: 'stripping stud on oper 2999991855 dia we'
-
Aluminum Nosing 2 inch with Grit Surface
This 2-1/2" deep nosing is made from the same material as our Grit-Surface Aluminum Treads. The front edge is 1-3/4" deep (inside nose dimension is 1-1/4"). The nose has a 1-3/4" wide abrasive finish with a 3/4" tapered aluminum back edge. Both the nose and tapered edge have a 1/4" wide reflective yellow safety tape strip for additional safety. The nosing is available in abrasive colors of Black, Brown, Blue, Gray, Green, Red or Yellow. Nosing is available solid (for glue-down applications) or with countersunk holes (for screw-down applications) every 12". Nose drops 1-1/16".
SPECIFICATIONS:
Furnish and install Musson Grit-Surface Aluminum Nosings, 3/16" thick X 2-1/2" deep; cut lengths up to 10 foot long. Tread surface shall have aluminum oxide abrasives permanently bonded to a heat treated aluminum nosing with 1/4" wide reflective yellow safety strip on both the top surface (between the grit surface and aluminum) and the nose. Grit surface shall be in one of the following standard colors: Black, Brown, Blue, Gray, Green, Red or Yellow. Nosings can be supplied with two countersunk holes every 12" for screw down installation or without holes for installation with our #400 Neoprene Contact Cement.
Custom sizes are available up to 10' long
GSA2N- -
Adams Rite 8600 Concealed Vertical Rod
The Adams Rite 8600 Concealed Vertical Rod is designed for narrow stile aluminum framed glass doors. The device will fit on stile widths of 2" or more. We recommend this device for replacement only, modifying your existing door to this exit device will be labor intensive. The 8611 would be for the aluminum finish and the 8622 would be or the dark bronze finish. We try to keep the Aluminum and Dark Bronze in stock in the 36" and 48" devices.
This device is not Electrified, please call for the Electrified Model.
8600- -
300 Series Vinyl Stair Treads
Description
This is a very good stair tread, but not one of our favorites. The nose on this vinyl stair tread is difficult to work with in some applications. Because the nose has substantial material (thickness) it is tricky to work with. We can send you a sample, so you can see how it fits on your step. It is our lowest cost protection for stairs of homes, duplexes and apartments. Features extra heavy snap-on nose that fits either square or curved nose wood steps that are between 3/4" and 1-1/8" thick. Made in the USA.
SPECIFICATIONS:
- Koroseal vinyl rib design stair treads
- Thickness: 1/8"
- Depth: 9-5/8"
- Snap on nose
- Sizes available: 18", 24", 30", 36", 42", 48" or 72"
- Colors available: Brown, Black
VST300
