Search results for: 'case latch trai tube acrylic solid t'
-
RCM525 Pressure Sensitive Adhesive
Excelsior PS-525 Modified Pressure Sensitive adhesive is an acrylic adhesive that can be used as a wet-set, tacky-wet, or dry-set pressure sensitive adhesive for the permanent installation of dimensionally stable Resilient flooring products over porous and non-porous substrates in indoor applications; it is a low odor, non-flammable, solvent-free and ready to use product. We are recommending the 1/16” X 1/16” X 1/16” square notch trowel which yields 150 square foot/gallon coverage; the resulting installation will end up with a non-releasable firm-set adhesive bond.
Access Times:
Heat Welding ≥ 24 Hours
Light Foot Traffic ≥ 24 Hours
Heavy Foot Traffic and Rolling Loads ≥ 48 Hours
Maintenance ≥ 72 Hours1 Gallon covers approximately 150 square feet.
RCM525- -
Specta Deluxe Olefin Carpet Mats
Plush and durable, this olefin cut pile carpet mat helps wipe shoes clean at the entryway. Reap benefits from the many features of this long wearing carpet mat; save money on maintenance costs. Solution-dyed olefin yarn preserves the attractive color appearance.
- 17 oz. of 100% continuous filament olefin yarn per square yard fused to a 65 mil durable solid vinyl back.
- Provides superior wiper service, ultimate floor protection, reduces maintenance.
- Traps over one gallon of water per square yard; dries faster than conventional carpet mats to lessen slippery hazard.
- Repels stains to maintain mat’s original beauty; clean with vacuum, hose or broom.
- Made in the U.S.A.
- SPECTRA-DELUXE MATS—approx. 1" vinyl border on all four sides.
SDxxx- -
GS365 Vinyl Stair Treads
Vinyl Stair Treads GS365 with Grit Strip
This is one our highest volume vinyl stair treads. Heavy duty to stand up to most applications with the safety of inlaid grit strips. Made in the USA
SPECIFICATIONS:
Furnish and install No. GS365 Koroseal Vinyl Stair Treads
Grit-Strip rib design stair treads; 7/32" thick, 12" deep; 1-1/4" square nose; two black* 1" wide abrasive Grit-Strips inlaid in tread, 1" from front edge, spaced 1-1/4" apart; contains no asbestos fiber; made of first quality homogenous vinyl, color throughout thickness; free from imperfections which might lessen serviceability. Meets Federal Specs. RR-T-650E Type B. Select standard length of 36", 42", 48", 54", 60", 72", 84" or 96". Select standard solid color of Brown or Gray.GS365 -
405CR Vinyl Stair Tread Risers
405CR Vinyl Stair Tread Risers
Plain color cove risers match Koroseal vinyl stair treads; or use a contrasting riser with vinyl or rubber treads; easily trimmed in height and length; savings in installation are substantial; cove risers are same sizes as stair treads.
SPECIFICATIONS:
Furnish and install No 405CR Koroseal vinyl coved stair riser; 1/8” thick, 7” high with 5/8” toe; ribbed back. Select standard length of 18”, 24”, 30”, 36”, 42”, 48”, 54”, 60”, 72”, 84” or 96”. Select standard solid color of Brown, Sand, Gray or Black.
405CR -
400 Series Vinyl Stair Treads
400 Vinyl Stair Treads
Heavy gauge sharp-rib design Koroseal vinyl treads for heaviest traffic; 1/4" thick at wear area, easily trimmed to cover and fit any stair step. Install over concrete, metal, wood, terrazzo. Extra heavy thickness at the front "wear area". Meets Fed. Specs. RR-T-650E Type B. They are designed for interior use.
SPECIFICATIONS:
No. 400 Koroseal vinyl rib design stair treads 1/4" thick 12" deep; 1-1/4" square nose; contains no asbestos fiber; made of first quality homogeneous vinyl, color throughout thickness; free from imperfections which might lesson serviceability. Select standard length of 24", 30", 36", 42", 48", 54", 60", 72", 84" or 96". Select standard solid colors of Brown, Sand, Gray or Black.
VST400 -
Aluminum Nosing 2 inch with Grit Surface
This 2-1/2" deep nosing is made from the same material as our Grit-Surface Aluminum Treads. The front edge is 1-3/4" deep (inside nose dimension is 1-1/4"). The nose has a 1-3/4" wide abrasive finish with a 3/4" tapered aluminum back edge. Both the nose and tapered edge have a 1/4" wide reflective yellow safety tape strip for additional safety. The nosing is available in abrasive colors of Black, Brown, Blue, Gray, Green, Red or Yellow. Nosing is available solid (for glue-down applications) or with countersunk holes (for screw-down applications) every 12". Nose drops 1-1/16".
SPECIFICATIONS:
Furnish and install Musson Grit-Surface Aluminum Nosings, 3/16" thick X 2-1/2" deep; cut lengths up to 10 foot long. Tread surface shall have aluminum oxide abrasives permanently bonded to a heat treated aluminum nosing with 1/4" wide reflective yellow safety strip on both the top surface (between the grit surface and aluminum) and the nose. Grit surface shall be in one of the following standard colors: Black, Brown, Blue, Gray, Green, Red or Yellow. Nosings can be supplied with two countersunk holes every 12" for screw down installation or without holes for installation with our #400 Neoprene Contact Cement.
Custom sizes are available up to 10' long
GSA2N-
