Search results for: 'good 8 dorma below door hing'
-
Von Duprin Exit Device 3327 Bottom Latch 050401
Von Duprin 22, 33, 9927 Bottom latch.
Used to replace the bottom latch on the Von Duprin 2227, 3327A, and 9927 on devices shipped after October 1998.
Includes screws and sometimes the bracket
Von Duprin Part # 050401
G050401 -
Von Duprin Exit Device 2227 Bottom Latch 050090
Von Duprin 2227 Bottom latch.
Replaces and updates all 2227 bottom latches to the new style if you device was shipped before October 1998. If your device was shipped after October 1998 then use the G050401.
Includes screws and bracket
Von Duprin Part # 050090
G22VR120 -
Von Duprin Mullion Weather Stripping
Von Duprin Mullion Weather Stripping
Von Duprin 050580 10' Weatherstripping for the 5654 and 5754 Mullions. Each strip is 10' long and two would be required per mullion. This product is specific to Von Duprin products and will usually only work on Von Duprin Products.
G050580 -
Von Duprin 55NL Cam
The Von Duprin 55NL Cam is one of the handed parts in the housing, the other is the Arm. If you need to change the hand of a housing, you just need to order the other hand Cam.
The Cam shown in the Picture is Right Hand
Von Duprin Part #'s 050355-Right Hand, 050356-Left Hand.
G050355-6 -
Von Duprin Exit Device 88 Axle Package
Von Duprin Exit Device 88 Axle Package
Von Duprin 88 Axle Package
New style axle snaps together, and replaces the old style which were screwed together with allen wrenches. This style of axle has been around since about 1990. The piece on the right is only used for taking the axle apart.
Von Duprin Part # 090006 or 090082
88R40 -
Von Duprin Exit Device 22, 33, And 99 Dogging Shaft 090040
The Von Duprin 22, 33, 33A, 98 and 99 dogging shaft is the current dogging shaft. And has been in production since 1998. If your device is from before 1998, then you would use the 050709. This is the piece that the dogging key would fit into. The shaft is for a 5/32" dog key. #4 on diagram
Von Duprin Part # 090040
G090040 -
Von Duprin 9927 Top Latch
Von Duprin 9927 Top latch
Used on all the Von Durpin 9827 and 9927's. This latch updates your current latch if your device was installed before October 1998. If your device is newer that October 1998, then use the G050400. This is usually the problem if your bottom rod is dragging on the floor. Includes screws.
Von Duprin Part # 050091
G99VR10 -
Von Duprin Exit Device 88 Lever Arm Left Hand
Von Duprin Exit Device 88 Lever Arm Left Hand
Von Duprin 88 replacement lever arm for all the Von Duprin 88 exit devices. The arm includes the Wedge, Wedge Ring, Wedge Tite Screw and Dog Screw, and sometimes the axle.
Von Dupin part # 050439
Old Part # 10072988R70- -
Von Duprin Exit Device 3327 Top Latch 050400
Von Duprin 22, 33, and 9927 Top latch
This latch is used on the 2227, 3327A, and 9927 Surface Vertical Rod Devices. This latch is for use on devices shipped after October 1998. This is usually the problem if your bottom rod is dragging on the floor. Includes screws. The mounting bracket is sometimes included, and sometimes they are not. Call us and we will check.
Von Duprin Part # 050400
G050400 -
Von Duprin 9927 Rod Guide Assy
The Von Duprin 9927 Rod Guide is the latest version of the Guide. The guide includes the metal strap and the nylon bushing the rod slides through, a major improvement of the original version.
Works on all of the Von Duprin 98 and 9927's. Replaces the old style which had the cover and springs.
Von Durpin part # 112063
G99VR35- -
Von Duprin 22 Metal End Cap 900397
The Von Duprin 22 Mechanism Metal End Cap 900397 is new for 2016. This new kit replaces the 900397 with a metal end cap, which is has always been a weak link of the 22 series. The package includes the End Cap, Bracket and the Mounting Screws. This cap and bracket will work on all of the 22 and 2227 series.
Von Duprin part # 900397
G22R10M- -
Von Duprin Exit Device 990NL Trim
The Von Duprin 990NL Trim is the standard NIght Latch Trim for the 99 and 98 Series devices. The plate is constructed of Bronze or Stainless Steel and then plated to the desired finish. The plate measures 3" wide by 14-3/16" tall, and includes the mounting screws. The stanchions coming off the back of the plate line up with the center case mounting screws. The Rim Cylinder shown in the picture is not included.
Von Duprin Part # 990NL-R&V
99NL
