Search results for: 'case latches than tile acrylic spec top'
-
Von Duprin Exit Device 3327 Top Latch 050400
Von Duprin 22, 33, and 9927 Top latch
This latch is used on the 2227, 3327A, and 9927 Surface Vertical Rod Devices. This latch is for use on devices shipped after October 1998. This is usually the problem if your bottom rod is dragging on the floor. Includes screws. The mounting bracket is sometimes included, and sometimes they are not. Call us and we will check.
Von Duprin Part # 050400
G050400 -
Von Duprin 88 Center Case Rivet 090002
The Von Duprin 88 Center Case Rivet 090002 is also known as the Latch Tail Rivet used on the 88 Rim Device. The Rivet fits into the spring and into the Latch Tail 050500. The rivet measures 1-1/4 inches long less the head, with a 1/8 inch diameter. We sell this piece individually.
88r320 -
World Dryer White Wall Guard
Wall Guard’s white acrylic units measure 31.5”x15.5”x.06” and are designed to be installed under hand dryers. Provides protection for wall and makes clean up simple. Wall Guard can be used many different applications other than just under a hand dryer. Can be mounted around sinks, on restroom stalls or anywhere where to help prevent water damage. Known as World Dryers part number 37-10455K.
- Unit Size: 31.5”x15.5”x.06”
- White(Antimicrobial Acrylic-PVC Composite)
- Mounted using Heavy Duty Double-Sided Adhesive Strips(Included)
- Easy Cleaning
- Modern Design
WD-3710455K -
Monarch 19-24-25-XX Top Latch 588
Monarch 19-24-25-XX Top Latch 588
Monarch 19-24-25-XX Top Latch 588 for non Fire Rated Doors. This latch has a long history, the old number is 588, and the new number is 650389. A non Fire Rated door is usually an exterior door, or a door that is not designed to contain the spread of fire.
Falcon Part # 650389
G588 -
Von Duprin 8827-F Top Latch Kit
Von Duprin 8827-F Top Latch Kit 050462
This is the Top Latch Kit for the Von Duprin 8827-F. The 8827-F is the Fire Rated Surface Vertical Rod device usually used on interior doors to contain a fire. The Fire Rated version would not have dog screws to lock the device in the retracted postion.
Von Durpin Part # 050462
Old Part # 10267688VR10F -
Doromatic Exit Device 1690/1990 Top Rod Latch Assy.
Doromatic Exit Device 1690/1990 Top Rod Latch Assy.
Used on the 1490, 1690 and 1990 Concealed Vertical Rod Devices
Doromatic Part # PB130, and also 4270101806
G199025 -
Von Duprin Exit Device 2227 Top Latch 050091
Von Duprin 2227 Top latch
This latch is used on devices shipped before October 1998, see related products for the new style latch if your device is newer. This is usually the problem if your bottom rod is dragging on the floor. Includes screws.
Von Duprin Part # 050091
G22VR10 -
RCM525 Pressure Sensitive Adhesive
Excelsior PS-525 Modified Pressure Sensitive adhesive is an acrylic adhesive that can be used as a wet-set, tacky-wet, or dry-set pressure sensitive adhesive for the permanent installation of dimensionally stable Resilient flooring products over porous and non-porous substrates in indoor applications; it is a low odor, non-flammable, solvent-free and ready to use product. We are recommending the 1/16” X 1/16” X 1/16” square notch trowel which yields 150 square foot/gallon coverage; the resulting installation will end up with a non-releasable firm-set adhesive bond.
Access Times:
Heat Welding ≥ 24 Hours
Light Foot Traffic ≥ 24 Hours
Heavy Foot Traffic and Rolling Loads ≥ 48 Hours
Maintenance ≥ 72 Hours1 Gallon covers approximately 150 square feet.
RCM525- -
Doromatic Exit Device 2090 Active Case
Doromatic Complete 2090 and 1090 Active Case. Includes all of the interior hardware. Just unscrew or loosen the three set screws and remove your old case and install and tighten the three set screws. Housing measures 7-1/2" long by 1-3/16" wide.
4270902740 Left Hand Aluminum Stock
4270902742 Left Hand Dark Brown Stock
4270902743 Left Hand Black * One week lead time
4270902746 Right Hand Aluminum Stock
4270902748 Right Hand Dark Brown Stock
4270902749 Right Hand Black * One week lead timeG209001 -
Von Duprin 55 End Case
The Von Duprin 55 End Case is the housing on the hinge side of the door. The function of this housing is to lift the cross bar, and support the function of the Active Case. If your housing is on the right side when standing inside looking out, then you would order the Right Hand Case. The package includes the housing, springs and back plate, the arm is not included. The current part number on this part is 050196 and 050197, the old part number is 111931 and 111932.
55R30
