Search results for: 'curtain hold horn royal slide for 1 inc'

Lyon Screw 8-32 x 1/4

Full Surface 4-1/2" Door Hinge-3 per box

Full Surface, steel construction, five knuckle, two bearing butt hinge.  Sold 3 in a box with wood and machine screws.   Available in Brushed Chrome and Paint Primed.  Ships from California.

Alcove One Ear Bracket Panel Kit for 1/4" Offset. This kit is used for panel to pilaster 1/4" offset and for 1" panel to wall bracket cast stainless steel plated. Security screws included. Also known as 615363.

Safway Bleacher Wheel 5/16" X 5/8" x 1-5/8".

Roval Automatic Roll Paper Towel & Waste Receptacle with Smaller waste receptacle, 13.5 gal. (51.1 L), allows installation according to ADAAG. Internal shelf is ideal for paper towel storage. Wall Opening: 15 13/16” x 54 11/16” x 10” Power Source can be hard wired is (AC) or Battery Operated (A) Battery not supplied, 4-D Batteries.

Hussey Bleacher Wheel 5" x 1-3/16" x 3/8". Also known as 2011007. Load approx. 190 - 210 lbs.

Cast Stainless Steel

Used on many Toilet Partition Manufacturers Plasitc Laminate stalls

40-8562304

The Handicap Grab Bar is fabricated of #18 gauge stainless steel with a #4 satin finish.  They are available in 1 1/4” and 1-1/2” outside diameter.  All bars maintain a constant 1 1/2” offset, which is the distance between the inside of the bar and the mounting surface.  The mounting flanges have a 3” diameter.  We offer two types of mounting,  exposed screw mounting and snap on flange concealed. When properly installed they will easily support up to 250 pounds.  The recommended height for mounting these grab bars is 33 to 36” above the finished floor, but heights vary depending on local codes.  The overall length of a 12" grab bar is 15" due to the 3" diameter flanges.  Due to the various materials that these are mounted on, screws are not included.

Cast stainless steel outswing door kit for square edge doors and posts. For 1" doors and 1" post. All hardware screws included for installation of these products. All hardware is a gravity close so your door self closing every time. Also known as part number 21343.

Toilet Partition Continuous One Ear Wall Bracket For 1" Panel Aluminum

Constructed of extruded anodized aluminum. Base is 2-5/8" wide by 54" long, with screw holes every 13" or so. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The legs have a clearance of 1" for 1" thick panels. Sometimes known as Bathroom Stall Continuous One Ear Wall Bracket. The manufacturers part numbers are 2878, and 650-9750-54. These brackets are shipped with all the needed fasteners.

C-Fold, Multi-Fold Paper Towel Dispenser
22 gauge Type 304 Stainless Steel
Heavy duty door and piano hinge
Tumble lock on doors and waste receptacle
600 C-fold or 800 Multi-fold towel capacity
13"w x 26"h x 4"d

C-Fold, Multi-Fold Paper Towel Dispenser
22 gauge Type 304 Stainless Steel
Heavy duty door and piano hinge
Tumble lock on doors and waste receptacle
600 C-fold or 800 Multi-fold towel capacity
13"w x 26"h x 4"d

The Klauber Folding Bleacher Gear Motor 1/4 Hp Single Phase is also known as Part # P6000IR.

This Klauber Gear Motor Single Phase features:

• ¼ horsepower
• 115 volts
• RPM 12
• Amps 4

The powerful Klauber Folding Bleacher Gear Motor 1/4 Hp Single Phase is designed specifically for folding bleachers, providing reliable performance and durability. With its ¼ horsepower, it delivers the necessary strength to operate bleacher systems smoothly and efficiently. The Klauber Folding Bleacher Gear Motor 1/4 Hp Single Phase runs on a single-phase power supply of 115 volts, making it suitable for a variety of settings, including schools, gyms, and auditoriums.

As a facility manager, you are probably sure to check the bleacher hardware in your building periodically and replace any worn parts to maintain safety standards. Our online store has replacement parts readily available to order for this purpose. Regular maintenance is crucial for the longevity of your bleachers. We recommend scheduling routine inspections to identify any potential issues before they become major problems. This proactive approach not only enhances safety but also minimizes downtime, allowing your facility to operate smoothly. Whether it's for sporting events, school assemblies, or community gatherings, well-maintained bleachers contribute to a safe and enjoyable environment.

The installation process of this Klauber Gear Motor Single Phase is straightforward, allowing you to quickly set up and start using your bleachers without unnecessary delays. The Klauber Folding Bleacher Gear Motor 1/4 Hp Single Phase is built to withstand the rigors of frequent use, providing peace of mind for facility managers. Whether you are upgrading existing bleacher systems or installing new ones, the Klauber Folding Bleacher Gear Motor 1/4 Hp Single Phase is an excellent choice for ensuring safety and convenience in any venue.

For more information on the Klauber Folding Bleacher Gear Motor 1/4 Hp Single Phase or to purchase, please feel free to contact us. We always encourage you to ask us questions in order to get the best performance from your Klauber Folding Bleacher Gear Motor 1/4 Hp Single Phase.

Reinforcing Pivot Hinge - For use with 4-1/2" wide butt hinges

3/4" to center line of 4-1/2" hinge pin.
Pin uses large pin and bushing.
Used to dampen vibration and increase
strength to your full mortise butt hinges.
Constructed of heavy duty cold rolled steel.
Made of Zinc Plated Steel
Supports weights up to 300 lbs

Manufacturer part # B1923
Our part # DR1923 for Right Hand, DL1923 for Left Hand

These hinges are no longer handed, you can select right or left, but the hinges will work both ways.

Project In Handless Window Lock 1-3/8"

Cast white bronze with a brushed nickel finish

Wayne Bleacher Wheel, 1/4"x13/16"x3". Soft rubber wheel 100# load capacity. Known as 262wn.

Indoor Flag Stand - 1 3/8". These cast stands are designed to compliment any flag set. Easily movable, these are the most practical stands for general use. This flag pole base is 12" diameter and 6" high. This flag stand weighs 15 pounds. 

Indoor Flag Stand - 1". These cast stands are designed to compliment any flag set. Easily movable, these are the most practical stands for general use. This flag base weighs 15 pounds. The flag stand is 12" diameter and 6" high. 

Universal Bleacher Spring 2-1/2" long.

Interkal Bleacher Gearmotor 1/2 hp, 3 phase, 460 volts, 12 RPM and known as 652566 or k01151g600. 1 week delivery.

Knickerbocker Hinge Pin For Metal 1/4" Diameter 2-3/4" Long, Known as part number 216.

Toilet Partition Continuous Hinge Without Spring, 57-1/2 Long Stainless Steel

16 gauge (.060" thick) stainless steel construction. 3" wide when laid flat x 57-1/2" long with holes every 11" or so. 1/8" diameter hinge pin. Hinge can be raised up 3/8" for emergency entry. Also known as a Bathroom Stall Piano Hinge, or Full Length Stainless Steel Continuous Piano Hinge. Manufacture part # 7649.

Shipped with all the fastners

Fenestra Casement Operator

The arm is 9" long and the outside screw spacing is 5-1/4". The inside threaded holes are 4-1/4" apart. Die cast construction with steel arm. Ships with handle and mounting screws.

Endura Floor Stands for U.S. Flag. Our most popular floor stand. Comes complete with weighted inner core and brilliant anodized finish.12" diameter, 6" high and weighs 14 lbs.

Ordering online all solid plastic (HDPE) pilasters manufactured by global partitions, see color chart below. For other factory colors please call for pricing. All toilet partitions ship in 48-72 hours plus 2-4 days travel. Pilasters Include: floor mount hardware and Stainless Steel Shoes.Available for the following widths - 3, 4, 5, 6, 7, 8, 10, 12, 16, 18, 20, 22 and 24" x 82" ht for overheadbraced type.

Color Chart 

Lyon Metal Locker Single Tier Lock Bar for 60" locker, length 53-1/4". Used September 2004 - Current.
Comes with 3 nano rollers. Also known as RH679460.

Coat Hook 3" Projection x 1-3/4" High Cast Stainless Steel

Cast stainless steel construction. The hook base measures 1-3/16" wide by 1-9/16" high. The long hook projects out 3" and the short hook projects out 1-1/2". Also known as Bathroom Stall Hook. Manufacture part # 4023.

Compact high-speed hand dryer for applications where less space is available. 5-year warranty. 9-25/32" W x 6-5/8" H x 5-7/16" D
FEATURES

• Quick drying — less than 15 seconds
• Operates automatically using infrared sensor
• Auto-resetting thermostat
• 60-second automatic shut off
• Cover fabricated of heavy-duty, one-piece-formed stainless steel

Felt Pads 1" Diameter, self adhesive for easy installation in seconds. Prevents scratching on floors and reduces noise made by chairs. 3/16" thick, NO LONGER AVAILABLE IN GRAY, THEY ARE NOW A TAN COLOR. 

Toilet Partition Stainless Steel Continuous U Bracket, 71", 7/8"x1-1/2" 18 Gauge.

Stainless Steel Construction 18 gauge. U bracket is for 7/8" wide partitions and is 1-1/2" height and 71" long. Holes are typically spaced every 13-1/2" vertically. This bracket is also known as a Full Length Toilet Partition Continuous U Bracket 71". Bracket has rounded edge radius. Designed to attach pilasters and/or panels to walls. Continuous brackets help eliminate sightline into stalls.

*Fasteners not Included *

Manufacture part # 204099