Search results for: 'stripping sure on oper 2999991855 dome we'

Truth Split Arm Operator 15.30

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator. Ships with matching handle.

Left hand shown. Coppertone only, White is no longer available

Common numbers found on this operator is 31850

Roto Casement Operator

This Roto Casement Operator features a hole spacing of 3-1/2" on thee outside mouting holes and 1-7/8" on the two inside mouting holes.  The housing is contructed of die case metal that is electro-statically painted.   The housing is 5-1/2" wide.  The optional handle fits the 5/16" Hex Shaft.

Left Hand Shown in picture

Use adhesive where Grit Strip is applied to porous surfaces such as wood or concrete. Grit Strip adhesive is recommended as a sealer; will give a better, longer lasting bond. Recommended application temperature is 60 degrees and above. One quart covers approximately 50 square feet (single coat) of Grit Strip; available in quart and pint units.

Adhesive information

Truth Entrygard Dyad Window Operator.

Common numbers found on this operator are 30636, 30637, and 20544 for the old style,
31368, 20810, and 45275 for the new style.  Call or email for quantity "Discount Codes".

For link off-set up version order Wi1562

See attached file of what the Original Version looked like

Left hand shown.

Defender Window Hinge 10” Sold in Pairs

This hinge is used on aluminum, vinyl and wood windows.  They are fitted with a unique plastic raiser block which guarantees a sure fit.  This hinge is 10” long,  has a 1/2” stack height and measures 11/16” wide and is constructed of Stainless Steel.  We sometimes see Securistyle or made in the UK stamped on the hinge.

Pella Casement Operator

Left Hand Shown

Truth 22.19 Awning Operator

This Truth Awning Operator is usually used on vinyl clad or aluminum windows, and is fastened to the frame by two screws from the rear, which are 7" on center.

Truth Part Number 22.19.xx.212

Fenestra Casement Operator

The arm is 9" long and the outside screw spacing is 5-1/4". The inside threaded holes are 4-1/4" apart. Die cast construction with steel arm. Ships with handle and mounting screws.

The Truth 22.18 Front Mount Awning Operator spreads 20-1/8 inches pin to pin on the arms when it is in the closed position. The Front Mount hole spaceing is 7 inches on the outside holes and 6 1/8 inches on the inside holes.

Pella Window Operator Crank Handle. Fits all Pella Operators.

3/8"-11 Spline

Truth 23.02 Window Operator

13-1/2" long arm. Rear Mounting. Ships with matching handle.

Truth Encore Single Arm Operator.

Truth 15.18 Split Arm Window Operator

Common number found on this operator is 30905, which is found on the linkage arm, along with 45035 on the body, 40351 and 40352 on the arms. Also known as a TH-24174, TH-24175, TH-24176, and TH-24177. Replaces the TH-24018, TH-24019, TH-24020 and TH-24021.

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator. Ships with matching handle.

Left hand shown.

Casement Window Operator 11" Arm

Die cast housing with steel arm. The hole spacing of the window operator housing is 4-3/4" on the outside screws and 3-7/8" on the inside two screws. The arm is 11" from the roller to the center of the window operator housing. This operator uses a 5/16" spline operator, part #Ro169516.

The Adams Rite 8800EL Exit Device is the Electric Latch Retraction version of the 8800.  We see this used with many card readers, especially in Hotel/Motel applications.

The 8800 features the Starwheel locking bolt that interlocks door to the door frame.  This device is used exclusively on aluminum framed glass storefront doors.  If your door is 35" wide, then you would order the 36" device.  We want to make sure they device is wide enough to span the glass on the storefront doors.  Replacement parts are available.

To order specify your door width, color and voltage of the solenoid.

Pella Casement Operator Cover

Right Hand Cover Shown

Truth 10.11 Lever Operator Awning window operator.

Handle assembly projects more than 2"

Truth Entrygard Dual Arm Window Operator. This operator is the same as the Wi1510, except are arms are made of stainless Steel

To determine hand of operator, if your sash lock (window lock), is on the left, you would use a left hand operator. And if your sash lock is on the right, you would order the right hand operator.

Common numbers found on this operator are 30758 RH , 30757 LH, 30852, 20812, and 30767

Left hand shown.

Locker Number Plates fits most lockers except Lyon. Make sure to add what numbers you are looking for. 1-600 in stock. Pop rivets included. Overall size 2-5/16" x 1-1/16". Manufactured in the USA. Also known as 99001, 70072, bu0110, lu122. Hole spacing 1-3/4".

Note: Blank number plates are available and in stock, with no numbers on them. Each number plate you need is quantity one. Ten plates equal qty 10 for ordering.

*** Note we only sell 1-600, no special orders. ***

Truth 52.01 Maxim Single Arm Window Operator. Manufactured since 1999. Ships with matching handle.

Truth Window Operator 15.59

Same as the Wi1531 but with Metal 9/16" roller. Ships with matching handle.

Truth 11.30 Single Pull Awning Window Operator.

11-3/8" spread when in closed position.

Includes sash hook and matching handle.

Roto Split Arm Operator

The housing is 4-1/2" wide, and the linkage arm has an overall length of 4-3/8"

Right Hand shown in the picture

Truth 15.56 Single Arm Window Operator.

7-1/2" long arm. Ships with matching handle.

Truth Part # 15.56

Bronze only

Truth Split Arm Operator.

White and Bronze only. Ships with matching handle.

Common numbers found on this operator is 30866

Truth 10.10 Lever Operated Awning Window Operator.

Less than 2" projection.

Attaches to window at one point.

Includes sash hook.

Truth 10.10 Lever Operated Awning Window Operator.

More than 2" projection.

Attaches to window at one point.

Includes sash hook.

Norton PT24SOL 24 Volt Solenoid Assembly

If your Norton or Yale PowerTrack Door Closer is not holding the door open, this is usually the problem. To trouble shoot, first make sure you have voltage going to the solenoid. If you have voltage going in, and the door is still closing, then your solenoid is burned out. The solenoid is under constant voltage, so they do not last forever. The assembly measures 6-1/2" long by 1-1/8" wide with a height of 3/4". We sometime find the number F98024SH.1315 24 VDC on the solenoid.

Norton Part # PT24SOL

5/16" Spline Window Operator T Handle.

Replace regular crank handles with this compact T handle. Also known as a Butterfly Handle.

Vent Arm Operator 10"

Replacement vent arm Operator.

This product is usually used in aluminum frame windows.

The package includes 10" vent arm, handle loop, and all brackets shown in the diagram.

Truth 23.54 Split Arm Window Operator

A common number found on this operator is 30866

4-1/2" long linkage arm, Ships with matching handle.

Truth 23.00 Single Arm Window Operator, rear mounting

9-1/2" arm, rear mounting, Ships with matching handle.

Truth Entrygard 11.42 Awning Operator

Numbers usually found on this operator are 31545

arms measure 12" across when in the closed postition

Truth part # 11.42.00.001

Truth Manual Skylight Operator Gear

The gear measures 1-1/16" diameter by 15/16" tall. The hex end is 3/4".

Truth Part # 30742

Truth 22.17 Awning Window Operator

Surface mounted Truth Awning Window Operator.  The arms span 13-1/4” from rivet to rivet.  The mounting holes measure 6-7/8” on the outside screws center to center, and 6” center to center on the two inside mounting screws.

Truth Part # 22.17