Search results for: 'covers latch toilet trim acrylic stop together'
-
Chrome Plated Slide Bolt Latch
Chrome Plated Slide Bolt Latch 1-1/2" Wide X 3-1/4" High, 2-3/4" Between Screws. Die cast construction and polished chrome plated. Used on Accurate Toilet Partition and Global Toilet Partitions. Also known as a Surface Mounted Bathroom Stall Slide Latch and Toilet Partition Locks. Known as 40-8512899. Shipped with mounting screws. This latch is Ada approved.
9A2899 -
Von Duprin Exit Device 990TP Trim
The Von Duprin 990TP Trim is the standard Thumb Piece Trim for the 99 and 98 Series devices. The plate is constructed of Bronze or Stainless Steel and then plated to the desired finish. The plate measures 3" wide by 14-3/16" tall, and includes the mounting screws. The stanchions coming off the back of the plate line up with the center case mounting screws. The key cylinder locks and unlocks the thumb piece. The Rim Cylinder shown in the picture is not included.
Von Duprin Part # 990TP-R&V
Cylinder not included.
99TP -
-
Bobrick Inswing Keeper Bumper For Throw Latch For 1" Sq Edge
Bobrick Toilet Partitions Inswing Keeper Bumper For Throw Latch For 1" Sq Edge Post
Polished chrome plated Zamac construction. The strike and keeper is 2-1/2" tall by 1-15/16" wide. The mounting holes are 1-1/2" on center. The stop is 2-1/2" tall by 13/16" projection with a rubber insert. The two slots are 5/16" deep by 13/16" high. Also known as Bathroom Stall Strike and Keeper Inswing 1". Manufacture part # 5820.
Shipped with mounting screws.
9A5820 -
Sanymetal Door Stop
Sanymetal Partitions Door Stop For Inswing/Outswing Flat
Polished chrome plated Zamac construction. The strike and keeper measure 2-1/2" high by 1-7/8" deep by 1/8" thick. The stop has a 3/4" projection and is 9/16' deep with a rubber insert. The mounting holes are 1-1/2" on center. Also known as a Bathroom Stall Strike and Keeper Inswing/Outswing Flat. Manufacture part # 5170.
Shipped with mounting screws.
9S2704 -
Monarch 712L Lever Trim
The Monarch 712L Lever Trim is used for the XX-C, 18-C, and all 24 Series Falcon Devices. The XX-C and 18-C are the obsolete concealed vertical rod Monarch Exit Devices. The Trim is non handed or field reversible. The Key locks or unlocks the Lever. The escutcheon measures 1-3/4" wide and 7-1/4" long.
712L- -
-
Comtec In Swing Flat Stop 6"
Comtec Toilet Partitions In Swing Flat Stop 6"
Clear anodized aluminum construction. The strike and keeper is 6" tall by 2-9/16" deep and 3/4" thick on the stop. The material is 1/8" thick. The mounting holes are 3" on center. And the locking slot is 1-1/2" high by 3/8" deep. Also known as a Bathroom Stall Strike and Keeper-In Swing Flat. Manufacture part # 5798.
Shipped with mounting screws.
Aluminum 6" in swing flat stop keeper, for wall mount. 57989A5798 -
Monarch Exit Device 914KIL Lever Trim
Monarch Exit Device 914KIL Lever Trim
The 914KIL Lever Trim is for use on the Monarch / Falcon 19 Series. This lever trim is shipped with a standard Schlage C Keyway, that are keyed different if you are ordering multiple levers. The key locks and unlocks the Lever handle.
Monarch Falcon Part # 914KIL-KD
914KIL-KD- -
Torx driver bit T27
Torx driver bit T27 for toilet partition security screws. These torq heads screws are used with brackets that hold the partitions together. This torx bit is for a T27 size and is hollow for a screw with a pin sticking out in the middle of head of the screw and uses a 1/4" shank bit.
TBIT -
-
Von Duprin Exit Devices 608/696/880/990 Trim Grip
Von Duprin Exit Devices 608/696/880/990 Trim Grip
Replacement Grip/Handle only, screws not included. Cast bronze construction, and then plated to the selected finish. The Grip measures 15/16" wide by 6" long. The center to center hole spacing is 5-1/2". This handle works on the Von Duprin 608, 696, 880, and 990 outside trim plates.
Von Duprin Part # 972466 and 972467
Old Part # 969925 and 959122G972466- -
Trim Protector Bar
Trim Protector Bar
A great product for applications were your door knobs and levers are getting damaged due to hand carts and other items hitting door trim. Mount this product above or below existing items on walls and doors to protect and sheild them from damage.
Material: Brass, Bronze, Stainless Steel
Material Size: 3/8" x 1-1/2"
Base: 1-3/4" x 3-1/2"
Projection: 3-1/4"GA111- -
Privacy Covers
The Partition Privacy Covers, Great for Restroom Partition Door Gaps. Block's gaps between door and pilaster for both sides. Includes 2 per package, one for each side of door, 58" Tall. The Cover is just under 2" wide with the clear rigid vinyl mounting strip being 7/8" wide, and the cover being 1-1/8" wide. This product ships in an oversize box ground. This product is not recommended for solid plastic partitions, HDPE or solid polymer material. This is great for powder coated steel, plastic laminate, stainless steel and solid phenolic materials only.
The informational and installation video are shown in the Description Tab below. In Stock for quick deliveries.
9A1010 -
Von Duprin 386DT Dummy Trim
Von Duprin 386DT Dummy Trim
This Von Duprin 386DT Dummy Trim is just a pull handle. The bolt pattern of the trim plate lines up with the Von Durpin 33A on the inside so they are on conhesive unit. The base plate measures 7-15/16" by 1-5/8". The grip measures 8-1/2" by 4-5/16" with a 2-7/16" projection. This 386DT Dummy Trim is non handed.
386DT
