Search results for: 'ghost 8 deep board door hager'
-
Push Bar 1' Diameter 422
Push Bar 1' Diameter 422
Bar is made of solid aluminum, Stainless Steel or Bronze. The bar comes with thru bolts for mountingMaterial Size 1 " round
Base 1" Round
Clearance 1-1/8"
Projection 2-1/8"Please allow 4 weeks on Aluminum, Polished Brass, and Oil Rubbed Bronze. Stainless Steel and Polished Stainless Steel take about 2 weeks.
422 -
Stainless Steel Continuous Hinge, 54" -Rh Out/Lh In
Toilet Partition Continuous Toilet Partition Hinge 54" With Spring Close Stainless Steel, Rh Outswing, Lh Inswing
Stainless Steel Construction 16 gauge (.060" thick). Hinge is 3" wide when laid flat, by 54" long. Holes are 9/32" diameter, spaced every 10-1/4" or so. Hinge can be raised up 3/8" for emergency entry. Hinge pin is 1/8" diameter. This Continuous Hinge is for Right Hand Outswing, and Left Hand Inswing, see handing diagram under "More Views". Also known as a Full Length Bathroom Stall Continuous Hinge. Manufacturer part # 7969.
9A70C4 -
1/4-20 Swivel Glide Nylon Base
1/4-20 thread Leveler swivel nylon base glide. Stop wobbling of uneven floors with this Metal Furniture Foot. 1 1/8" base diameter and 1 1/8" stem length. Screw into a thread leg hole to reach your desired height. Combine with a tnut to install in wooden furniture legs.
SLA12525P -
Jackson 1095 Lever Arms
Jackson 1085 Lever Arms
Replacement Lever Arm for the Jackson 1095 Active Housings. This arm will only work on the 1095 Active Case! Handing is determined by standing inside and looking out, if the arm in on the right hand side of the door, it is a right hand lever that you would order.
Jackson Part # RH 30-1247/LH 30-1248
G10955X -
Sargent 700 ET Spindle Kit 730-7
Sargent 700 ET Spindle Kit 730-7
This Sargent Kit 730-7 includes the spring, spindle and the associated plates. Look under "More Views" for a detailed look of this repair kit. The 730-7 is for 1-3/4" doors. Shank measures 4-1/4" long, square spindle is 5/16" square.
Sargent Part # 730-7
G7307 -
Von Duprin Strike 248L-4
Von Duprin Strike 248L-4
The Von Duprin 248L-4 Strike is used as a Bottom Strike on the 2227, 8827, 9927, and 9827 Surface Vertical Rod Panic Devices. The 248L-4 strike measures 9/16" wide by 2-1/2" high with a hole spacing of 1-7/8. The strike projects out 3/8".
Ships with shim and mounting screws
Von Duprin Strike 248L-4
Burnished steel construction
248L-4 -
Knickerbocker Top Hinge
Knickerbocker Partitions Top Hinge
Chrome plated Zamac die cast construction. The wrap around dimension is 1-1/4" wide by 1-3/4" high and 11-16" deep.The hole spacing is 1-1/8" on center. The lug projects out 1-3/8" to center hole with a 1/4" bushing diameter. Also known as a Bathroom Stall Pivot Hinge - Top 1-1/4". Manufacture part # 3910.
a=1-11/16"
9K0240 -
Accurate Standard Turn Latch with Screw
Accurate Standard Turn Latch with Screw. This version started January 2013 for all accurate partition doors and ended September 2021. This old style is the exact same as Global's version, except the name on the cover latch part. Also known as 40-8513300. Chrome plated finish.
This turn latch will not replace previous version of Accurates old style turn latches that are no longer available.
9HACL80 -
Doromatic 1790 Exit Device
The Doromatic 1790 rim device is typically used in applications where maintenance is a concern because the rim device has fewer parts and pieces than current exit devices. The result is less maintenance and adjustment. The streamlined design has no openings for chains, reducing the risk for code infringements and offering increased building security by eliminating the possibility of tampering and forced entry through the use of coat hangers and other tools. The Doromatic 1790 may also be used to retrofit a Doromatic 2090 series crossbar device.
Replacement parts are also available
Shipped with all screws and strikes. If you wish to use a key cylinder on the exterior, you will need the 1790 NL/HB Cylinder Assembly, 179CA.
1790EO -
ASI Recessed Security Toilet Tissue Holder, Square, Front Mount
Recessed toilet tissue holder that is fabricated of 14 gauge type 304 stainless steel. Offers a satin finish exterior and glass blasted insterior finish. Interior diameter is 5" with 4-1/2" depth to accomodate a single standard roll of tissue tissue paper. Mounting flange is 7-1/8" (181mm) Square and features front mounting holes. Designed in mind for Behavioral Health and Detention Centers. Mounting hardware included.
Overall Dimensions:
7-1/8″ x 7-1/8″ x 4″ (181 x 181 x 102 mm)
Wall Opening:
5-5/16″ dia. x 5″ min. depth (135 x 127 mm)
A10-110-13 -
Aluminum Bracket One Ear 1-1/4" Panel, 1-1/2" - 2-3/4" L
Toilet Partition Bracket One Ear For 1-1/4" Panel Aluminum
Constructed of extruded anodized aluminum. The base is 2-5/8" wide x 1-1/2" high, with the two mounting screws 1-3/8" on center. The legs project out 2-3/4" with the thru hole at 2-3/8" from the back of the base. The distance between the legs is 1-1/4". It is designed for 1-1/4" thick panels. The 4 screw holes are 1/4" diameter. This bracket is also known as a One Ear Wall Bracket, 1844 One Ear Wall Bracket, Toilet Partitoin One Ear Bracket, or Bathroom Stall One Ear Bracket. The bracket is shipped with all the mounting screws.
9A1844 -
Accurate Partition Hinge Pin for Laminate
Accurate Partition Hinge Pin for Laminate Hinge Pin 3/8" Diameter X 3-7/16" Long
Knurled steel construction. Hinge pin is 3-7/16" long by 3/8" diameter. The knurled end has a threaded hole of a 10-24 screw. Also known as a Bathroom Stall Hinge Pin. Manufacture part # 99109.
9HAP30 -
Metpar Top Hinge Pin For Laminate
Metpar Partitions Top Hinge Pin Laminate Hinge Pin 3/8" Diameter x 3-7/16" Long
Knurled steel construction. Hinge pin is 3-1/2" long by 3/8" diameter. The knurled end has a threaded hole of a 10-24 screw. Also known as a Bathroom Stall Hinge Pin. Manufacture part # 99109.
9CP450
