Search results for: 'grai 8 dome break door hand'
-
Norton 8301 Door Closer
Norton 8301 Door Closer, Sometimes called the Norton 8301 Omni Door Closer
- Adjustable spring sizes 1 thru 6
- Rack-and-pinion design
- 1-1/4" (32mm) diameter piston
- 5/8" (16mm) diameter pinion journals
- Cast aluminum body
- Standard, separate and independent, latch,
sweep and backcheck intensity valves - Staked valves
- Molded plastic cover standard
This closer replaces the 8301BF Norton Door Closer. The standard 8301 now meets the Barrier Free Requirements.
8301- -
Global Partitions Phenolic Vault Door Kit
Global partitions vault door kit for Phenolic material. Comes in a brushed steel finish and are for 3/4" thick material only. You will need to choose in or out swing when ordering. Can be used as right or left handed. See manufacturers numbers listed below. Used with Global and Accurate partitions.
Inswing Door Kit: 40-8571005
Outswing door Kit: 40-8571006
9G85 -
International Door Closer 8050 Series
International Door Closer 8050
This closer is an ideal replacement closer for just about any Store Front Door. We recommend this closer because it will fit any size door, and you can adjust the spring tension to make it easier for the elderly, smaller children and the handicapped. This door closer will work on a Right or Left Hand Door, Push or Pull side or Top Jamb mounting, it ships with a parallel arm bracket, arm and mounting screws.
Length of Closer 9-3/4”, Horizontal Mounting Holes 9-1/16”, Vertical Mounting Holes 3/4”, Overall Height 4-21/32”, Height of Closer 1-21/32”, Projection from Door 2-29/32”, 4 Adjustments - Closing and Latching Speed, Power and Back Check.
We ship the 8051-TP DU or 8051-TP AL depending on the color you choose. This closer includes a full plastic cover
8050- -
Two Hole 1-3/8" Window Handle 9/32" Lockup Most Popular
Two Hole 1-3/8" Window Handle 9/32" Lockup Most Popular
This window handle is constructed of cast white bronze with a brushed nickel finish. The handle has a 1-3/8" hole spacing with 9/32" lock up dimension. This window handle is one of our most popular.
Right Hand shown in Picture
T1015 -
Detex Narrow Stile DN Lever Trim
The Detex DN Trim is built like their exit devices, extreme durable. Designed with a break-away lever to prevent permanent damage from vandalism or abuse. Escutcheon plate measures 1-7/8 by 8-1/4 inches, the plate is 7/8 inch thick. We ship the classroom function, key locks and unlocks the lever. The levers are field reversible.
G08DNS- -
LCN SEM7850 Magnetic Door Holder
LCN SEM7850 Magnetic Door Holder
LCN SEM7850 features a metal die cast housing that is surface wall mounted. Tri-voltage design works with 12, 24 or 120 volts, with 35 lbs. of holding force. The magnet housing measures 2-13/16" wide by 4-5/8" high. The armature (door mount part) is 1-11/16" wide by 2-3/8" high with a 1-7/8" diameter. The armature projects out 1-5/8". The total projection of both pieces is 3-5/8". Available in an aluminum or dark bronze color.
LCN Part # SEM7850
Armature extensions are available, along with replacement covers, magnets, and armatures.
Outlet box not included
SEM7850- -
Global Partitions Solid Plastic Vault Door Kit
Global partitions vault door kit for Solid Plastic material. Comes in a brushed steel finish and are for 15/16" thick material only. You will need to choose in or out swing when ordering. Can be used as right or left handed. See manufacturers numbers listed below. Used with Global and Accurate partitions.
Inswing Door Kit: 40-8571007
Outswing door Kit: 40-8571008
9G857 -
Zipper Pile Weatherstrip .270" Backing - .200" Pile Height - 100' Roll
Zipper Pile Weatherstrip .270" Backing - .200" Pile Height - 100' Roll
Replaces Old or Worn-Out Pile Weatherstripping in Doors and Windows. New Zipper Tooth Design Allows Pile to Easily Snap in from Above the Extrusion Slot. High Density Gray Pile with Double Center Fin.
Z78273C -
Zipper Pile Weatherstrip .270" Backing - .250" Pile Height - 100' Roll
Zipper Pile Weatherstrip .270" Backing - .250" Pile Height - 100' Roll
Replaces Old or Worn-Out Pile Weatherstripping in Doors and Windows. New Zipper Tooth Design Allows Pile to Easily Snap in from Above the Extrusion Slot. High Density Gray Pile with Double Center Fin.
Z78295C -
Sargent 1330 Door Closer
Sargent 1330 Door Closer
Grade 1 requirement, non sized and non handed, heat treated rack and pinion for longer life, separate closing, latching, back check and power adjustments, and a 10 year warranty. The aluminum color is in stock, dark bronze finish may take a few days to ship.
We ship the 1331-JUO
3/4" x 12" hole spacing1330- -
S.S. Slide Bolt Latch 1-7/8" Screws, 1/8" Bar To Door
Partition Surface Mounted Stainless Steel Slide Bolt Latch 1-7/8" Screws. Stamped stainless steel construction. Base is 2-7/8" high by 1-3/8" wide by 5/32" thick. Latch bolt is 2-1/4" long x 13/16" wide x 1/8" thick, and the slide distance is 25/32". Also known as a Bathroom Stall Stainless Steel Slide Latch and Toilet Partition Locks. Manufacture part # 6309. Shipped with mounting screws.
9A7055 -
LCN 4040XP Door Closer
LCN 4040XP Door Closer
- Strongest Pinion Ever - At 3/4”, It’s The Super Hero Of Pinions
- Taller Bearings - 5/8”, Real Muscle Against Forced Openings And Closings
- An Overall 44% Increase In Maximum Load Capacity
- Tougher Teeth - Fight Wear And Tear
- V-Shield Seal With 20% Longer Life
- Better Wear Resistance From Sagging Doors And Warped Frames
- XP = eXtra Protection In Real-World Applications
We ship the 4041XP Rw/Pa (Regular Arm with Parellel Arm Bracket)
4040XP- -
Intermediate Hinge IP-2202 and IP-2201
Intermediate Hinge IP-2202 and IP-2201
Cast aluminum construction with steel bearings and axle. The set measures 3-1/2" tall with an 1-3/8" projection. This hinge is usually used an an intermediate hinge in between the top and bottom hinge.
Manufacture part # IP-2202 and IP-2201
IP-2202 is for Right Hand Doors
IP-2201 is for Left Hand DoorsGIP2201- -
Surface Mounted S.S. Hinge Set- Rh In, Lh Outswing
Toilet Partition Higne Set, Rh Inswing, Lh Outswing Stamped Stainless Steel
Stainless Steel construction, 1/8" thick. Outside dimensions of the hinge are 3-5/16" wide by 2-7/8" high. The screw spacing is 2-5/16" wide by 1-1/2" high. The mounting holes are 1/4" diameter. For use on a right hand inswing door, or left hand outswing door. See "More Veiws" for the handing diagram. Also known as a Bathroom Stall Gravity Hinge Set, or Toilet Partition Surface Mounted Hinge Set. Manufacture part # 7093.
Shipped with mounting screws.
9A7093 -
Diaper Depot Changing Station Powder Gray
- Attractive, Durable, safe, affordable
- Combines durability with long lasting looks
- Universal Safety instructions
- 4" depth closed, 20" depth open, 34" wide
- Fully hidden gas shock
- Shelf for personal changing items
- Safe strap safety belt
- Molded in hook for purse or diaper bag
- Concave bed
- Includes industrial grade hardware kit for easy installation
- 5 year warrantee
9RSS1P -
Pivot Set TH1112 Amarlite Style
TH1112 Offset Pivots are used for both flush face frame installation and 1/8" recessed door applications. Pivots replace most major door manufactures. Suitable for aluminum doors weighing up to 125 pounds. These pivots are engineered and designed for durability, style and are easy to install. To order pivot: For LHRB door order RH pivot For RHRB door order LH pivot Specifications * 3/4" offset pivots for aluminum doors and frames * For flush door / frame and 1/8" recessed door applications * Weather resistant * Aluminum case construction * Vertical adjustment 1/8" * Full race ball bearing and design, provides smooth operation on bottom pivot door portion * No sag, entire weight of doors rests on floor mounted pivot portion * Completely temper proof, yet easily removable, replaceable in unlocked position * All pivots are handed- specify LH, RH * Finish: AL-Aluminum, DU-Duronotic
TH1112 -
Pivot TH1118-B Kawneer Style Pivot Set
TH1118-B Offset Pivots are used for both flush face frame installation and 1/8" recessed door applications. Pivots replace most major door manufactures. Suitable for aluminum doors weighing up to 125 pounds. These pivots are engineered and designed for durability, style and are easy to install. To order pivot: For LHRB door order RH pivot For RHRB door order LH pivot Specifications * 3/4" offset pivots for aluminum doors and frames * For flush door / frame and 1/8" recessed door applications * Weather resistant * Aluminum case construction * Vertical adjustment 1/8" * Full race ball bearing and design, provides smooth operation on bottom pivot door portion * No sag, entire weight of doors rests on floor mounted pivot portion * Completely temper proof, yet easily removable, replaceable in unlocked position * All pivots are handed- specify LH, RH * Finish: AL-Aluminum, DU-Duronotic
TH1118-B -
LCN SEM7820 Magnetic Door Holder
LCN SEM7820 Magnetic Door Holder
LCN SEM7820 features a metal die cast housing that is surface mounted on the floor. Tri-voltage design works with 12, 24 or 120 volts, with 35 lbs. of holding force. The magnet housing measures 5-1/8" long x 4-9/16" wide and 3-7/16" high. The armature (door mount part) is 1-11/16" wide by 2-3/8" high with a 1-7/8" diameter. The armature projects out 1-5/8". The total projection of both pieces is 6-3/4". Available in an aluminum or dark bronze color.
LCN Part # SEM7820
Armature extensions are available, along with replacement covers, magnets, and armatures.
SEM7820-
