Doors
-
Norton 7700 Series Power Track Arm
Norton 7700 Series Power Track Arm
Arm is shipped will all of the necessary hardware. This assembly includes the 7701ST-1AT Adjusting Head and Tube Assembly, and the 7701ST-1AR Adjusting Rod Assembly. The square shaft measures 7/16" x 7/16". The aluminum finish ships within 24 hours, dark bronze will take a little longer.
Norton Part # 7701ST-1A
7701ST1A- -
Jackson Exit Device 2085/2095 End Cap
Jackson Exit Device 2085/2095 End Cap
The Jackson Exit Device 2085/2095 End Cap measures 3-1/8" high, by 1-1/8" wide, and has a projection of 1-15/16". The mounting lugs are 1-3/8" on center and project out 1".
Jackson Part Number 30-1266-628 Aluminum
Jackson Part Number 30-1266-313 Dark BronzeG301266- -
Wood Door Automatic Flush Bolt FB40
Wood Door Automatic Flush Bolt FB40
H.B. Ives FB40 Series are sold has Top, Bottom or in Pairs (top and bottom). Fully automatic, inactive door is latched when active door closes, bolts retract when active door is opened. Top Bolt has no spring tension. They are non handed, but the top and bottom bolts are different. The body size is 1" wide, 8-1/2" tall and 2" deep, the bolts have a 3/4" throw with a 7/8" vertical adjustment.
Ives Part #'s
FB41P - Pairs
FB41T - Top
FB41B - BottomFB40 -
Hager 5400 Series Door Closer
Hager 5400 Series Door Closer
This Hager Door Closer is a Grade 2 closer. The hole spacing is 3/4" x 9-1/16" center to center. The closer comes with the ability to go left or right, push, pull or top jamb mounting.
We ship the 5400MLT04, aluminum is in stock, Dark Bronze has a 3 week lead time
5400- -
Norton 1600BF Barrier Free Door Closer
Norton 1600BF Barrier Free Door Closer
- ANSI A156.4, Grade 1
- 10-year warranty
- Non-handed
- Rack-and-pinion design
- Cast aluminum body
- Standard, separate and independent, latch, sweep
and backcheck intensity valves - 2-7/8" (73mm) projection
- Tri-Packed- packed for regular arm, top jamb and
parallel arm installations.
3/4" x 9-1/16" hole spacingOlder models may be stamped with Scoville or Eaton, which are the companies that used to own Norton.
We sometimes find 20-1624-4001, or 20-1604-4001 stamped on the back of the closer. If your door closer is stamped 20-1603-4001 or 20-1623-4001, you might want to double check the hole spacing. The 20-1603-4001 usually has a hole spacing of 3/4" x 8-3/16", you could use the International Door Closer 853 as a replacement.We ship the 1601 Norton Door Closer, which is a non size (meaning you can adjust the spring tension), which will work in place of the 1603BC, 1604BC, 1605BC and 1606BC.
1600BF- -
Intermediate Hinge TH1121 Kawneer Style
Intermediate Hinge TH1121 Kawneer Style
Male mounting bracket measures 1-5/16” wide by 2-3/16” high, with a hole spacing of 13/16”. Female mounting leaf measures 1-7/16” high by 1-9/16”, with a hole spacing of 3/4” center to center. These hinges are non handed.
TH1121 -
Von Duprin E996 Solenoid Kit 050814
The Von Duprin 050671 and 050814 solenoid have been discontinued. All of our stock is gone. Von Duprin has come out with a retrofit kit to update your E996 Lever to the M996 Lever. The kit changes out the solenoid for a mortorized version, more robust and uses less current. The newer version can be found by searching for M996.
This solenoid is used on the E996 Electrified Lever Trim. The Solenoid body measures 1-3/8” x 9/16” diameter, mounting bracket has a 3/4” on center hole spacing. The wiring harness has a two wire plug. We some times fine the number 991342 on the solenoid.
New for 2024 Von Duprin has come up with a Mechanical Electrified Conversion kit. This kit converts the EL Solenoid to a Mechanical Electrified Trim. More information can be found @ https://www.robertbrooke.com/von-duprin-m996l-retrofit-kit.html
Von Duprin Part # 050814
Von Duprin Part # 050671G050814 -
Norton Door Closer Rod and Shoe
Norton Door Closer Rod and Shoe
The Norton Rod and Shoe 7701-11 and 7701-11A come in two different lengths, 8-7/8" anc 12-1/2". The length is measured from the end of the bar to the center of the eyelet.
Norton Part #'s:
8-7/8" Long 7701-11
12-1/2" Long 7701-11A7701-11- -
Jackson Exit Device 1295 Push Pad End Cap Package
Jackson Exit Device 1295 Push Pad End Cap Package
Package includes two end caps, one bracket mounting screw, and 4 end mounting screws. This product was just upgraded to a metal cover, which will replace the old plastic cover.
Old Jackson part # 30-2677
New Jackson Part # 30-2654G302677-xx -
Jackson Exit Device 1285 Push Pad End Cap Package
Jackson Exit Device 1285 Push Pad End Cap Package
Package includes two end caps, one bracket mounting screw, and 4 end mounting screws. This product was just upgraded to a metal cover, which will replace the old plastic cover.
Old Jackson part # 30-2661
New Jackson Part # 30-2652-628 or 30-2652-313G302661- -
LCN Door Closer 1250 Rw/PA
LCN Door Closer 1250 Rw/PA
This new LCN Door Closer is a direct replacement for the Norton 1600 and Yale 50 Series Door Closers. It features, a cast aluminum cylinder, 15 year warranty, hole spacing 3/4” x 9-16”, powder coated finishes, and stick on mounting template. This door closer comes with the ability to mount on the push, pull or top jamb and is non handed. The door closer meets Grade 1-ANSI A156.4, UL/cUL, ADA and the Buy American Act certifications.
1250- -
LCN Door Closer 4050 Rw/PA
LCN Door Closer 4050 Rw/PA
This new LCN Door Closer is a direct replacement for the Norton 7500 and Yale 4400 Door Closers. It features, a cast aluminum cylinder, 2-3/8” x 6-3/4” hole spacing, 25 year warranty, powder coated finishes, and stick on mounting template. This door closer comes with the ability to mount on the push, pull or top jamb and is non handed. The door closer meets Grade 1-ANSI A156.4, UL/cUL, ADA and the Buy American Act certifications.
4050- -
Von Duprin Electric Strike 6111 24VDC
Von Duprin Electric Strike 6111 24VDC
Von Duprin 6100 Series electric strikes are designed for use with Rim devices. The model 6111 retrofits model number VD 3031, and measures 1-5/8” wide, 6” high and has a backbox depth of 1-3/4”. Other voltages and replacement parts are available.
FSE - Fail-secure. Requires power to be applied to unlock the strike lip. On loss of power, the strike lip is locked-Fire Rated
FS - Fail-safe. Requires power to be applied to lock the strike lip. On loss of power, the strike lip is unlocked. Non Fire-Rated.
VD6111 -
Von Duprin Electric Strike 6112 24VDC
Von Duprin Electric Strike 6112 24VDC
Von Duprin 6100 Series electric strikes are designed for use with Rim devices. The 6112 has a 3/4” latch bolt throw, 9” face plate length, 1-5/8” width, and an 1-3/4” backbone depth. The lock retrofits the Folger Adams FA 310-4. Other voltages and replacement parts are available.
FSE - Fail-secure. Requires power to be applied to unlock the strike lip. On loss of power, the strike lip is locked-Fire Rated
FS - Fail-safe. Requires power to be applied to lock the strike lip. On loss of power, the strike lip is unlocked. Non Fire-Rated.
VD6112 -
Von Duprin Electric Strike 6113 24VDC
Von Duprin Electric Strike 6113 24VDC
Von Duprin 6100 Series electric strikes are designed for use with Rim devices. The 6113 has a 3/4” latch bolt throw, 6” face plate length, 1-5/8” width, and an 1-15/16” backbone depth. The lock retrofits the VD 3011 and VD 3021. Other voltages and replacement parts are available.
FSE - Fail-secure. Requires power to be applied to unlock the strike lip. On loss of power, the strike lip is locked-Fire Rated
FS - Fail-safe. Requires power to be applied to lock the strike lip. On loss of power, the strike lip is unlocked. Non Fire-Rated.
VD6113 -
Von Duprin Electric Strike 6114 24VDC
Von Duprin Electric Strike 6114 24VDC
Von Duprin 6100 Series electric strikes are designed for use with Rim devices. The 6114 has a 3/4” latch bolt throw, 7” face plate length, 1-7/8” width, and projects1-9/16”. The lock retrofits the Folger Adams FD 310-5. Other voltages and replacement parts are available.
FSE - Fail-secure. Requires power to be applied to unlock the strike lip. On loss of power, the strike lip is locked-Fire Rated
FS - Fail-safe. Requires power to be applied to lock the strike lip. On loss of power, the strike lip is unlocked. Non Fire-Rated.
VD6114 -
Sargent Door Closer Heavy Duty Compression Holder Arm
Sargent Door Closer Heavy Duty Compression Holder Arm
Forged Steel Arm 11-1/4" long, non handed, will work left or right for Parallel Armed Sargent Closers. Permits 105 degree opening with built in compression stop and holder mechanism.
Sargent Part # 25-CPSH
25-CPSH- -
Monarch Exit Device 912L Lever Trim
Monarch Exit Device 912L Lever Trim
The 912L measures 7-1/4" high by 1-3/4" wide and the mounting plate is 5/8" thick. We ship these with the Dane Lever, which projects out 2-7/8" in the Classroom function. This lever is for use on the Monarch/Falcon 19 Series. On the Night Latch function the key locks and unlocks the lever handle, the Key Cylinder is not included. This lever trim is field reversible, so handing is not needed. We offer this Lever Trim in Painted Aluminum, Painted Dark Bronze, and Brushed Satin Nickel.
Monarch Part # 912L Dane
G912L- -
Monarch Exit Device 914KIL Lever Trim
Monarch Exit Device 914KIL Lever Trim
The 914KIL Lever Trim is for use on the Monarch / Falcon 19 Series. This lever trim is shipped with a standard Schlage C Keyway, that are keyed different if you are ordering multiple levers. The key locks and unlocks the Lever handle.
Monarch Falcon Part # 914KIL-KD
914KIL-KD- -
International 53K01 Lever Trim
International 53K01 Lever Trim
The International 53K01 Lever Trim is for the 5000 Series International Door Closer exit device. The rose diameter is 3-3/8", with a lever length of 4", and the projection is 3". Available in Aluminum or Dark Bronze colors. Available in Classroom and Storeroom functions. Classroom function the key locks and unlocks the Lever Handle, if you turn the key one way it is only unlocked for that one passage, if you turn the key the other way, the Lever is unlocked until it is locked again. Storeroom/Night Latch function the Lever is always locked.
53K01-
