Exit Devices
Exit Devices and Hardware to Ensure Safety in Your Commercial Building
At Robert Brooke & Associates, we are known for being a top distributor of exit devices (also sometimes called panic devices) and hardware from highly-esteemed and trusted brands throughout the door security industry. The exit devices we have available can be newly installed on doors in various facilities with a constant inflow of visitor traffic. We also sell door hardware that can replace old or worn down hardware on your previously-installed devices.
Having a security system in place on doors has become crucial to the safety of visitors in a building. Whether in a school, office, or another type of building, regulars and visitors deserve to feel safe. One reason we entered into the industry was to be able to provide consumers with exit devices that can potentially minimize danger in buildings everywhere.
Our selection consists of surface vertical rod devices, concealed vertical rod devices and more. Don’t forget, we also have a wide selection of replacement hardware to keep your exit devices up-to-date and in excellent condition.
Exit Device Manufacturers
We carry several different styles of exit devices all made by reputable manufacturers. From Dorma exit devices to exit devices by Von Duprin, we have what you’ve been searching for! Plus, we have replacement door hardware for these devices from several first-rate brands in the industry. For a brief overview of each manufacturer and their products available in our selection, see below.
- Adams Rite
- Cal-Royal
- Corbin Russwin
- Detex
- Dorma Exit Devices
- Dor-O-Matic
- International Devices
- Jackson Exit Devices
- Monarch (Falcon) Exit Devices
- Sargent Exit Devices
- Exit Devices by Von Duprin
- Yale Exit Devices
High-Quality Exit Devices
Our website offers a convenient search tool so that customers are able to do a quick search for a specific item they are looking for. If there is no specific search in mind, browsing the array of panic devices will assist in narrowing down the options.
Our available selection includes surface vertical rod, concealed vertical rod, touch bar, push bar, heavy-duty exit devices and a number of other styles that you can order straight from our website. With several of these, you will have the option to choose the color, finish and size that you prefer.
Make note of whether you will need to order panic devices that work on single doors or ones that work on double doors for your installation project. Depending on the product, the panic devices on our website can work on either single or double. Reading the details will also tell you whether they are left-handed, right-handed or non-handed.
Click on the product image or text to find more dimensional and pricing information, along with the type of doors that the product can be used with. Remember to keep this information in mind when ordering your panic devices for your school, business, office, organization, athletic center or other facility.
Door Hardware for Exit Devices
We also carry an assortment of hardware for when a replacement part is needed to repair an exit device. The type of hardware that is required to make repairs to your exit device will depend on what type of device has been installed on the commercial building doors.
Dog keys, strike plate assemblies, end caps, dogging pins, mounting base kits, solenoids, lever trims, lever springs, spring retainer hubs and screws are just a few of the replacement parts that we have available in our online selection. Whatever the reason be that you require new hardware, we have the best replacement parts for you that will do just the trick. We can help you choose the best hardware to get your exit device working good as new.
Check Out Our Shipping and Handling Policy
Be sure to read our online product descriptions of each device and piece of hardware that you are interested in purchasing. The product description will have the shipping details for that particular item.
The shipping times will vary. If the Lead Time next to the product is In Stock, then the items that you chose to order will be shipped from our warehouse with no delay. The Lead Time for a product can also be a day, a week or more. In this case, your order will take longer to ship because it will be coming from the manufacturer.
Order Your Exit Devices Online
Buy your exit devices and door hardware online today! We not only have a supply of Sargent exit devices and exit devices by Von Duprin, but we also have so much more that can be shipped to you immediately.
We want to make sure that you are comfortable with your order and that any question you have is answered in a timely manner. Contact us with questions before you move forward with checking out and we will give you expert answers.
-
Adams Rite Metal End Cap
The Adams Rite Metal End Cap is for the hinge side of the door and replaces the plastic version (25-0471). This cap can be used on the 3100, 3300, 3600, 3700, 3900, 8100, 8200, 8300, 8400, 8500, 8600, 8700, 8800 and 8900. We find the number 23-0600 cast in to the end cap.
Adams Rite Part Number 41-0903-IP or 41-0903-119
G410903 -
Adams Rite P8800 Pullman Rim Exit Device
The Adams Rite P8800 is the same device as the 8800 Star Wheel exit device, except it has a Pullman Latch, which is more popular. Push bar Length Standard sizes: dimensioned for 30, 36, 42, and 48 inch openings. Standard width bars can be field cut to the next smallest opening width.
P8800- -
Cal Royal 2000 Alarmed Exit Device
Cal Royal 2000 Alarmed Exit Device
Alarm units has an internal horn. When the push rail is depressed, the horn sounds to provide an audible means of signaling that the door has been opened and violated. The unit has changeable 2 minute alarm cutoff or manual reset. Preset at factory for 2 minute alarm cut off. Jumper cable is provided to swich to continuous alarm. The key switch to turn the alarm off is a standard 1” cylinder with “C” keyway. The alarm operates on one standard 9 volt transistor battery. When battery is weak the horn will emit an intermittent signal. Alarmed units are supplied with two switches. One switch monitors the push rail and the other switch monitors the latch bolt for full proof security.
Unit includes “EMERGENCY EXIT ONLY. ALARM WILL SOUND” decal for application on door or unit.ALM2000 -
Cal Royal 2000 Series Exit Device Lever Trim
Cal Royal 2000 Series Exit Device Lever Trim
Non-handed Grade 1 (Clutch Style)
Cylindrical body hardened steel heavy duty tailpiece. For
1¾” and 2 ¼” doors. Prefix THI before part # for 2 ¼” door
thickness. Available for fire and non fire rated rim and
vertical rod exit devices.
Rose diameter 3 ½”, lever length 4 ¾”.ENTOOL- -
Cal Royal 2200 Exit Device
The Cal Royal A2200 Series is a heavy duty Grade 1 device. Available in Panic and 3 Hour Fire Rated versions. The device is non handed, and features a 3/4 inch latch bolt throw. The device is constructed of heavy gauge steel and then powder coated. The non fire rated version will feature dogging, the fire rated version will not. This device retro fits the Sargent 28 Series.
Devices available for 32" and 24" wide doors. Please call 1-800-642-2403 for more information
2000 -
Cal Royal 4400 Exit Device
The Cal Royal 4400 Rim Exit Device has a Grade 2 rating. The device features a 3/4" Latchbolt, Roller Strike and a 1" diameter Crossbar. The device comes in a brushed chrome and dark bronze finish, and comes with either a 36" or 48" crossbar. You would need a 4-1/2" minimum stile width.
CR4400- -
Cal Royal 4400 Thumbpiece Trim
The Cal Royal 4400 Thumbpiece Trim is for use on the 4400 Rim Device only. The plate measures 3-1/2 by 16 inches. The key locks or unlocks the thumbpiece. This plate ships with a 6 pin solid brass "C" keyway rim cylinder. And only comes in brushed chrome and dark bronze finishes.
THP4400- -
Cal Royal 6600 Rim Device
The Cal-Royal 6600 Rim Device is a Grade 1 exit device. It is designed for doors that have at least a 4-1/2 inch stile width. The 36 inch device has a 32 inch actual length and can cut down 6" (24 inch actual). The 48 inch device has an actual length of 44 inches and can be cut down 12 inch (34 inch actual). Devices ships with 938 Strike and all the mounting screws.
CR6600- -
Cal Royal 6660 Surface Vertical Road
The Cal-Royal 6660 Surface Vertical Rod Device is a Grade 1 exit device. It is designed for doors that have at least a 3-3/4 inch stile width. The 36 inch device has a 32 inch actual length and can cut down 6" (24 inch actual). The 48 inch device has an actual length of 44 inches and can be cut down 12 inch (34 inch actual). Devices ships with 938 Strike and all the mounting screws.
6660EO -
Cal Royal 7000 Alarmed Exit Device
Cal Royal 7000 Alarmed Exit Device
Same as the Cal Royal 7700, but with these added features"
Alarm unit has internal horn. When the push rail is depressed, the horn sounds to provide an audible means of signaling that the door has been opened and violated. The unit has changeable 2 minute alarm cutoff or manual reset. Preset at factory for 2 minute alarm cut off. The key switch to turn alarm off is a standard 1 ¼” cylinder with “C” keyway. The alarm operates on one standard 9 volt transistor battery. When battery is weak the horn will emit an intermittent signal. Alarmed units are supplied with a switch that monitors push rail only. Unit includes “EMERGENCY EXIT ONLY • ALARM WILL SOUND” decal for application on door or unit.
ALRM7700 -
-
Cal Royal 7700 Rim Exit Device
Cal Royal 7700 Rim Exit Device
For use in institutions, schools, universities, commercial buildings where heavy duty reliable operation is a requirement. ANSI A156.3, Grade 1 heavy duty exit device in surface vertical rod and rim designs. Rail assemblies are heavy duty extruded aluminum body with stainless steel push pad and end caps are made of brass, bronze or stainless steel. Rail travels in direction of the door swing. Trims are thru bolted for additional security. Conforms & Meets ADA Regulations. UL Listed for Panic and ULC10C, UBC 7-2-1777 codes. UL Listed for Fire Exit Hardware. Uncompromising security and safety in single and double fire exit doors. Chassis mounted unit construction. Rim and vertical rod devices are non-handed and easily reversible. Available in many different functions. Lever and escutcheon trims are grade 1 construction with clutch free-wheeling mechanism. Rose and escutcheon covers 161 cut out.
Templating matches the Von Dupin 99 and 98
CR7700EO-
