Exit Devices| Cal-Royal

Exit Devices

Selling exit devices and repair parts for Adams Rite, Doromatic, American Device,
Cal Royal, Corbin Russwin, Global Door Controls, Jackson Exit Device, Monarch,
Sargent, Von Duprin, and Yale.

Make sure you click on the Exit Device Image or Text for more
dimensional and pricing information.

Filter
View as Grid List

26 Items

per page
Set Descending Direction
  1. Cal Royal 2000 Alarmed Exit Device

    Cal Royal 2000 Alarmed Exit Device
    Alarm units has an internal horn. When the push rail is depressed, the horn sounds to provide an audible means of signaling that the door has been opened and violated. The unit has changeable 2 minute alarm cutoff or manual reset. Preset at factory for 2 minute alarm cut off. Jumper cable is provided to swich to continuous alarm. The key switch to turn the alarm off is a standard 1” cylinder with “C” keyway. The alarm operates on one standard 9 volt transistor battery. When battery is weak the horn will emit an intermittent signal. Alarmed units are supplied with two switches. One switch monitors the push rail and the other switch monitors the latch bolt for full proof security.

    Unit includes “EMERGENCY EXIT ONLY. ALARM WILL SOUND” decal for application on door or unit.

    ALM2000
    As low as $292.22
  2. Cal Royal 2000 Exit Device

    Cal Royal 2000 Series Rim Device

    Grade 1
    Non handed
    3/4" latch bolt throw
    Heavy gauge steel, painted

    Devices available for 32" and 24" wide doors. Please call 1-800-642-2403 for more information

    2000
    As low as $168.15
  3. Cal Royal 2000V Exit Device

    Cal Royal 2000V Surface Vertical Rod

    Grade 1
    Non handed-field reversible
    Heavy gauge steel, painted
    4-1/2" minimum stile width

    24" wide x 84" high, and 32" wide and 84" high also available in aluminum only.

    2000V
    As low as $258.82
  4. Cal Royal 2000 Series Exit Device Lever Trim

    Cal Royal 2000 Series Exit Device Lever Trim

    Non-handed Grade 1 (Clutch Style)
    Cylindrical body hardened steel heavy duty tailpiece. For
    1¾” and 2 ¼” doors. Prefix THI before part # for 2 ¼” door
    thickness. Available for fire and non fire rated rim and
    vertical rod exit devices.
    Rose diameter 3 ½”, lever length 4 ¾”.

    ENTOOL-
    As low as $128.85
  5. Cal Royal 5000 Exit Device

    Cal Royal 5000 Rim Device

    Grade 2
    Heavy gauge steel construction, powder coated colors

    5000EO
    As low as $145.42
  6. Cal Royal 7000 Alarmed Exit Device

    Cal Royal 7000 Alarmed Exit Device

    Same as the Cal Royal 7700, but with these added features"

    Alarm unit has internal horn. When the push rail is depressed, the horn sounds to provide an audible means of signaling that the door has been opened and violated. The unit has changeable 2 minute alarm cutoff or manual reset. Preset at factory for 2 minute alarm cut off. The key switch to turn alarm off is a standard 1 ¼” cylinder with “C” keyway. The alarm operates on one standard 9 volt transistor battery. When battery is weak the horn will emit an intermittent signal. Alarmed units are supplied with a switch that monitors push rail only. Unit includes “EMERGENCY EXIT ONLY • ALARM WILL SOUND” decal for application on door or unit.

    ALRM7700
    As low as $657.90
  7. Cal Royal 7700 Rim Exit Device

    Cal Royal 7700 Rim Exit Device

    For use in institutions, schools, universities, commercial buildings where heavy duty reliable operation is a requirement. ANSI A156.3, Grade 1 heavy duty exit device in surface vertical rod and rim designs. Rail assemblies are heavy duty extruded aluminum body with stainless steel push pad and end caps are made of brass, bronze or stainless steel. Rail travels in direction of the door swing. Trims are thru bolted for additional security. Conforms & Meets ADA Regulations. UL Listed for Panic and ULC10C, UBC 7-2-1777 codes. UL Listed for Fire Exit Hardware. Uncompromising security and safety in single and double fire exit doors. Chassis mounted unit construction. Rim and vertical rod devices are non-handed and easily reversible. Available in many different functions. Lever and escutcheon trims are grade 1 construction with clutch free-wheeling mechanism. Rose and escutcheon covers 161 cut out.

    Templating matches the Von Dupin 99 and 98

    CR7700EO-
    As low as $497.60
  8. Cal Royal 7760 Surface Vertical Rod Exit Device

    Cal Royal 7760 Surface Vertical Rod Exit Device

    For use in institutions, schools, universities, commercial buildings where heavy duty reliable operation is a requirement. ANSI A156.3, Grade 1 heavy duty exit device in surface vertical rod and rim designs. Rail assemblies are heavy duty extruded aluminum body with stainless steel push pad and end caps are made of brass, bronze or stainless steel. Rail travels in direction of the door swing. Trims are thru bolted for additional security. Conforms & Meets ADA Regulations. UL Listed for Panic and ULC10C, UBC 7-2-1777 codes. UL Listed for Fire Exit Hardware.

    Templating matches the Von Dupin 99 and 98

    CR7760EO
    As low as $651.22
  9. Cal Royal 4400 Exit Device

    The Cal Royal 4400 Rim Exit Device has a Grade 2 rating. The device features a 3/4" Latchbolt, Roller Strike and a 1" diameter Crossbar. The device comes in a brushed chrome and dark bronze finish, and comes with either a 36" or 48" crossbar. You would need a 4-1/2" minimum stile width. 

    CR4400-
    As low as $179.51
  10. Cal Royal Escutcheon 4400 Lever Trim

    The Cal Royal Escutcheon 4400 Lever Trim is non handed (easily field reversible), thru-bolted, rigid non clutch lever for the 4400 Rim Device. The key locks or unlocks the lever. The Escutcheon measures 2-3/4 by 8-1/2 inches, the lever length is 4-3/4 inches.

    ESC44
    As low as $125.24
  11. Cal Royal 4400 Thumbpiece Trim

    The Cal Royal 4400 Thumbpiece Trim is for use on the 4400 Rim Device only. The plate measures 3-1/2 by 16 inches. The key locks or unlocks the thumbpiece. This plate ships with a 6 pin solid brass "C" keyway rim cylinder. And only comes in brushed chrome and dark bronze finishes.

    THP4400-
    As low as $70.52
  12. Cal Royal 938 Surface Strike

    The Cal Royal 938 Surface Strike is used on the 7700 and 5000 Series Rim Devices.  The strike includes all the mounting screws.

    G938
    $27.83
View as Grid List

26 Items

per page
Set Descending Direction