Parts
We carry an extensive selection of exit device hardware, from retainer hubs and auxiliary kits to latch bolt springs and hex studs. Browse our online store for affordable exit device parts that you will need to install or repair your device.
Having the right exit device hardware for your device will help to ensure that your building will be secure and meet mandatory code requirements. Keeping these devices up to date with exit device replacement parts will help to further ensure building security. The exit device parts that we sell are made by top-tier manufacturers that demonstrate a standard of excellence when making their products.
We offer a variety of exit device replacement parts including dog keys, end caps, mounting base kits, surface and rim strikes, springs, screws, brackets, and so much more. Look at the manufacturer information to be sure that you are ordering the correct exit device part for your device! We encourage you to contact us if you have any questions so that you receive the appropriate exit device hardware for your device.
Our website offers a convenient way to purchase exit device parts from different manufacturers all in one place. When you shop with Robert Brooke & Associates, you can be certain that you will receive reliable, well-made, and long-lasting exit device parts with high performance rates. With our ample supply of some of the finest exit device parts on the market, you can be sure that your facility will remain safe and secure, while also providing a simple and efficient way for people to use exit doors in an emergency.
Order Your Exit Device Parts Right Here
Our selection of exit device replacement parts includes an array of options to fit your specific needs. From rim exit device parts to mortise exit device parts, we have a range of products that are designed to meet the demands of any commercial or institutional setting. Our exit device parts are made from high-quality materials and are built to withstand heavy use and abuse, ensuring that they will last for years to come.
Each brand has its own set of exit device hardware. Some of the exit device parts are interchangeable with other brand parts. Below are some examples of exit device parts that we regularly stock and sell online.
- End Caps
We stock several styles of Adams Rite end caps. We have metal end caps for this brand’s concealed vertical rod and mortise devices, plus we have metal end caps for their surface vertical rod devices which can also serve as a replacement for the plastic version. We also offer their plastic end cap. This exit device part occasionally will have the number HX0471 cast into it. We also carry their EX88 and EX89 end caps, EX76 end caps, and more! Check out our end caps from other brands, as well.
- Strikes
Another common exit device part that we carry is the strike for various devices and brands. You will want to be sure you are ordering a strike that matches up with the brand of your device. For example, the 938 Surface Strike made by Cal Royal is designed for use on the brand’s 7700 and 5000 Series rim devices.
- Springs
We also have springs for many devices and brands. One example of this is the Sargent Lever Return Spring designed for use on the lever trims of their Sargent devices. There are also other types of springs such as the 90 Series Mouse Trap Spring designed for use with the Sargent 9898 Rim Device.
- Pins
Some devices also require another exit device part that is typically referred to as a pin. For instance, we carry the control link pin and the lever trim shear pin kit for use with Von Duprin devices. You can also find push bar pins, pivot pins, dogging pins, and more on our site for many brands.
- Keys
Keys are used for a number of device styles. We have dog keys, dogging hex keys, cotter keys, and more.
- Brackets
A bracket is another commonly used exit device part that you might need to order a replacement for over time. Many brands make devices that require some sort of bracket. Brackets come in several styles such as latch bracket, lift bracket, dogging bracket, pinion support bracket, push bar anchor bracket, mounting bracket, spring tube bracket, mullion bracket, release bracket, and more.
- Guides
You can also order guides on our website for use with specified brands. This includes top bolt guides, bottom bolt guides, rod guides, push bar guides, tailpiece guides, and more.
- Solenoids
We offer solenoids such as the Adams Rite EL8600 Solenoid 31-0833-IP which is designed for use with their Concealed Vertical Rod, the 12-volt or 24-volt Adams Rite EL8800 Solenoid, and the Von Duprin 050535 El Solenoid which is compatible with their 33A, 35A, 98, and 99 devices along with the Dor-O-Matic/Falcon EL1690, EL1790, and EL2390 devices. Browse our assortment of solenoids for more information.
Again, some strikes are interchangeable with strikes from other brands. This includes the Monarch/Falcon 299 Strike designed for use with the 24-R and 25-R Devices which is the exact same exit device part as the Von Duprin 299 Strike. We also stock electric strikes, dust-proof strikes, roller strikes, and more.
That’s not all. We also offer so many more exit device parts and accessories. From cover plates and compression springs to dogging kits and trim sets, we have everything you need to ensure that your panic devices are functioning properly and are up to building code. Our exit device hardware is designed to be easy to install and use, making it a great choice for any facility.
Contact Our Team of Experts at Robert Brooke & Associates with your Exit Device Part Questions!
At Robert Brooke & Associates, we are committed to providing our customers with the highest level of service and support. Our team of experts is always available to answer any questions you may have and to help you find the right products for your needs. We also offer fast and reliable shipping, so you can get the products you need when you need them.
So if you are looking for well-built, unyielding exit device hardware, look no further than Robert Brooke & Associates. With our wide selection of products and our commitment to customer satisfaction, we are the go-to source for all your exit device part needs.
-
Doromatic Surface Strike STK45
Doromatic Surface Strike STK45
This strike is used when we have a double door application without a center post. By using this strike we can have one door with a surface vertical rod and one door a rim device, which will save money because vertical rods are usually expensive. This strike can be used with the 1590, 1790 and 2090 Rim Devices. The strike base measures 1-5/16" wide by 3-1/4" high, and 1/4" thick. The three slots are 1-1/4" on center. This strike ships with the mounting screws.
US19-Black finish
STK45 -
Dust Proof Strike DP1
- Designed for use with the bottom bolt of all flush bolts.
- Spring-loaded plunger returns to floor or threshold level anytime
flush bolt is retracted, eliminating need to clean standard
floor strikes. - Strike hole is 3/4" Diameter and 1-1/8" Deep
DP1 Face Plate: 1-7/16" Diameter
Body: 1-3/16" Diameter x 1-7/8" DeepDP1- -
Dust Proof Strike DP2
- Designed for use with the bottom bolt of all flush bolts.
- Spring-loaded plunger returns to floor or threshold level anytime
flush bolt is retracted, eliminating need to clean standard
floor strikes. - Strike hole is 3/4" Diameter and 1-1/8" Deep
DP2 Face Plate: 1-5/8" W x 3-1/2" L x 1/8" Thick
Body: 1-3/16" Diameter x 1-7/8" DeepDP2- -
E Trim Solenoid PKG
The E Trim Solenoid PKG is used on the FSA/FSE Electric Lock/Unlock Lever Trims. It is sometimes called the 600293 FSA/FSE Solenoid Kit. The unit measure 1-1/2" long by 3/4" diameter. The hole spacing on the mounting bracket is 3/4" on centers.
Monarch/Falcon Part # 600293.
G600293 -
Exit Device Dog Key 5/32" X 2-1/8" Long
Exit Device Dog Key 5/32" X 2-1/8" Long
Used on Von Duprin 55 and 88 Exit Devices, Corbin Russwin Exit Device, Yale Exit Device and Dor-o-Matic exit devices. This Hex Dog Key is not long enough for the Von Duprin 33, 34, 33A, 35B, 98 or 99 Exit Devices.
also known as Hex Key, Dog Key, Allen Key, Dogging Key
88R60-SHORT -
Exit Device Dog Key 5/32" x 3-1/16"
5/32" Dog Key used on old Von Durpin, and Dor-o-Matic exit devices. This key has the longer shaft to fit into the deeper Von Duprin dogging slots.
5/32" hex key
3-1/16" overall length
88R60 -
-
Falcon Doromatic Exit Device 1690/1990 Top Rod
Dor-o-Matic 1690/1990 Top rod. Connects panic bar to the bottom latch
Doromatic Part # 4270100017 PB24
This rod is 35" tall
Dor-o-Matic 990/1990 Repair Parts Breakdown
Dor-o-Matic 1690 Repair Parts Breakdown
G199024T -
Falcon Mechanical Electric Latch (MEL) Retrofit Kit 47867200
New for 2024 the Falcon MEL 47867200 Mechanical Latch Retraction. Retrofits all 1690, 1790, 24 and 25 Series devices to Mechanical Latch Retraction. This new system uses the PS902 Power Supply. The benefits for the MEL Series over the Older EL series are lower power draw (1 amp verse 16 amp), and more flexible power supply location, longer wire runs and thinner guage wires.
G47867200 -
-
Falcon Monarch Bottom Bolt Guide Assembly
Falcon Monarch Bottom Bolt Guide Assembly
The Falcon Monarch Bottom Bolt Guide Assembly 650387 is used the 19-V, 24-V, 25-V and the XX-V Bottom Rod. The Guide Assembly measures 1-7/8" tall by 1" wide and projects 1-9/16" at the widest projection. The Bottom Bolt Guide is made of zinc plated steel.
Falcon Monarch Part # 650387
G650387 -
Falcon-Doromatic 1690 Exit Device
The design of the Doromatic 1690 is ideal for demanding, high-traffic applications. The vertical rods and latch mechanisms are concealed in the vertical door stile, ensuring trouble-free operation. Cast metal cover plates and end caps hold up to rigorous use. A quick, singlepoint dogging feature in the housing deactivates the device, permitting unrestricted traffic flow. The Doromatic 1690 may also be used to retrofit a Doromatic 1990 Series crossbar device.
Replacement parts are also available
Shipped with all screws and strikes. The 1690NL Cylinder Assembly (169CA) is required if you wish to use a key cylinder on the exterior, SEE RELATED PRODUCTS toward the bottom of this page.
1690EO -
Falcon-Doromatic MEL1690 Exit Device
The same as the Falcon / Dor-o-Matic 1690 with Mechanical Electric Latch Retraction. Some of the features are listed below. A power supply is required.
Hand: Field reversible, non-handed.
Centercase and end cap are powder-coated black only.
Strikes: PB48 top.
Latches: Hex bottom latch (standard), RL - rod bottom latch, PL - Pullman bottom latch
Cylinder: Rim, key entry (NL) or hold back (HB) feature available.
Field selectable.
Sizes: 30", 36", 42", and 48".
Doors: 1-3/4" thick metal doors, specify if other.
Projections: 3-3/8" in neutral position, 23/8" in dogged position.
Pushbar height is 2-1/2.
Stile: 1-3/4" minimum.Voltage: Current:
24 VDC
1 ampReplacement parts are also available
Shipped with all screws and strikes.
MEL1690EO- -
HES 5000 Series Electric Strike Complete Pack
The HES 5000 Series Electric Strike Complete Pack is a compact, high performance electric strike designed for low profile openings where there is limited space behind the jamb. Its strength is derived from a unique keeper pin locking design, enabling the 5000 to exceed the ratings of the frame, door and locking hardware. This field selectable fail secure/fail safe unit is easy to install and accommodates latch bolts up to 5/8" throw.
5000C -
HES Electric Strike 9400
The 9400 series is a slim-line, surface mounted electric strike designed to accommodate rim exit devices with a 1/2" throw Pullman latchbolt. All components are completely encased within its 1/2" thick stainless steel housing, so no cutting on the frame is required for installation. Simply place the electric strike on the surface of the frame, align it with the exit latchbolt, and install. An 1/8" spacer plate is provided to accommodate varying door gaps. The 9400 exceeds Grade 1 standards for strength and performance. It is field selectable for fail secure or fail safe operation, and for 12 or 24 VDC. The 9400 features a smooth cover to conceal the mounting screws and provide a sleek surface for superior looks. Spacer Plate Included - the 9400 ships with one 1/8" spacer plate included in the box. Units ordered in a 630 finish are stainless steel. All other finishes have a black stainless steel spacer. Additional black spacer plates can be ordered as an accessory.
HES9400- -
International 8000 Series End Cap
The International 8000 Series End Cap is used on the hinge side of the the exit device. This cap includes the mounting bracket and the mounting screws. It is constructed of a die cast metal for years of service. The piece measures 2-3/8" by 2-1/4" by 1-1/2". This end cap is used on the International Door Closer models, 8510S, 8610S, 8710S, 8810S, 8620S, 8530S, and 8650S devices, along with the same devices ending in F.
INT8600EC- -
Jackson 1085 Lever Arms
Jackson 1085 Lever Arms
Replacement Lever Arm for the Jackson 1085 Housings, both sides. And the Jackson 1095 Inactive (hinge side) Housings. Handing is determined by standing inside and looking out, if the arm in on the right hand side of the door, it is a right hand lever that you would order.
Jackson Part # RH 30-1242/LH 30-1243
G10852x -
Jackson 1095P Paddle Exit Device
The Jackson 1095P Paddle Exit Device is designed for use on narrow style aluminum storefront doors. It features the same housing as the Jackson 1095, but with a paddle instead of a cross bar. This peice is designed for aluminum or steel doors, it will not work on wood doors. The device mounts on surface studs that need to be drilled and tapped on the door, if the door is wood, the threads will simply pull out.
1095P-
